Availability
Built for racers and engine builders who craved the performance, Moroso racing vacuum pumps are manufactured from billet aluminum and feature a precision-machined shaft, rotor, and bearings that will withstand the rigors of racing. They work by producing high crankcase vacuum, which increases power by improving ring seal, preventing blowby, and detonation. Allowing the use of lower-tension piston rings for less friction. These positive pumps are much more consistent and effective than header-mounted evacuation systems.
( 5 )
$1,599.99
Van Steel complete trailing arm assemblies are available with factory-style T-arms (no sway bar holes) or offset T-arms with spherical bearings. Additional contents include these new components: * Rotors * Spindles * Caliper mounting brackets * Bearing supports * Backing plates * Stainless steel parking brake hardware * Parking brake shoes * Bearings, seals, and races
( 2 )
$2,029.99
H&S Autoshot Dual-Spotter aluminum and steel dent pull guns are the only models capable of setting both steel and aluminum pulling studs. They feature a unique patented microprocessor design that provides accurate current control to assure maximum pulling strength with minimal heat distortion. The touch-tip ground legs provide positive contact on all surfaces and are easily identifiable to prevent cross-contamination for steel or aluminum panels. H&S Autoshot Dual-Spotter aluminum and steel dent pull guns come with collets for steel and aluminum studs, two ground pin set-ups, a weld-tip pulling arm, assorted pulling studs, and a heavy-duty ABS carrying case. Other product features, items, and specs: * No burn-through on the interior side of the panel to remove protective coatings * Studs are easily removed from the panel with much less surface damage common with conventional stud welders * Adjustable output power with LED display * 15 ft. torch cable * ETL certified 115 VAC charging power supply with output LED status, circular connector, and lighted power switch * 115 VAC at 0.8 amps * Output power 2,250A/70,000Uf * 27.8 lbs.
Not Yet Reviewed
$1,613.99
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel rear suspension kits are adjustable toe rod/strut rod/T-arm combos featuring Seals-It rod end seals. Contents and benefits: * T-arms with heims provide a full range of adjustment and are ideal for performance driving * Strut Rod with heims come with spherical bearings and Smart strut brackets * Heavy-duty toe rod assembly with heims * T-arm brackets promotes better geometry for improved traction, weight transfer, braking, and cornering
Not Yet Reviewed
$2,089.99
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel control arm bushings are offered in a variety of complete car sets covering front and rear, lower and upper, aluminum or steel frame cars. For off-road use, Van Steel control arm bushings feature Delrin® material that boasts many important characteristics including high-tensile and impact strength, low-friction, low moisture absorption, and self-lubrication.
Not Yet Reviewed
$1,519.99
Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section
( 1 )
$2,130.99
Increase your driving confidence and towing safety with the superior retarding performance of BD Diesel exhaust brakes. Using BD's exclusive Variable Orifice Technology, the turbo-mount design bolts in place of the factory elbow between the turbo and the exhaust system. This provides peak retarding power throughout the engine's rpm range—not just at high rpm like other brands. The remote-mount models, meanwhile, attach in the exhaust pipe and are perfect for modified applications. Some kits include an air compressor. Order the universal or vehicle-specific brakes best suited for your rig.
Not Yet Reviewed
$1,516.95
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$2,049.95
$1,609.95
—
$1,843.95
On Sale
Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included
( 3 )
$2,249.95
$2,023.95
COMP Cams Xtreme Energy retrofit cam and lifter kits are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy kit available for you. By using an aggressive lobe profile, these kits provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 41 )
$1,515.95
—
$1,676.95
On Sale
Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.
( 41 )
$1,749.95
—
$1,799.95
$1,573.95
—
$1,618.95
Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower
( 14 )
$1,650.99
—
$1,920.99
Make some noise with one of these Edelbrock Rollin' Thunder hydraulic roller cam, lifter, and pushrod kits. They feature a hydraulic roller camshaft and improved hydraulic roller lifters that have more aggressive profiles than conventional cams without excessive valve overlap. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about part compatibility with the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits, and you can be sure that all of the combinations will perform. Recommended for high performance street and strip use, the Edelbrock Rollin' Thunder hydraulic roller cam and lifter kits work best from 1,500 to 6,500 rpm and they maintain good vacuum at idle.
( 7 )
$1,583.95
—
$1,645.95
Vintage Air Gen-V Magnum Max SureFit Systems evaporator kits offer powerful and intelligent climate control. The Gen 5 uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Each evaporator kit includes the evaporator unit with Magnum Max blower and mounting brackets, louvers (where required), duct hose, wiring harness, bolt-in replacement control panel, hardware, and installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit system designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower
Not Yet Reviewed
$1,708.99
FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features
( 41 )
$1,806.00
—
$2,151.99
The Gen-V is Vintage Air's most powerful and intelligent climate control system. It uses an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate- and fin-cooling coils provide outstanding performance and instant temperature adjustments. The Gen-V Super Magnum SureFit system evaporator kit includes the evaporator unit with Magnum blower and mounting brackets, louvers (where required), duct hose wiring harness, new bolt-in replacement control panel, hardware, and installation instructions. Additional details: * Also includes variable blower speed and dash/floor/defrost blend * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower * This kit fits 1982-88 Oldsmobile Cutlass models with factory air
Not Yet Reviewed
$1,708.99
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 94 )
$1,899.95
$1,708.95
—
$1,899.95
Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)
( 2 )
$1,560.00
—
$1,645.00
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$1,699.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 386 )
$1,515.95
—
$1,676.95
GUNI's Fast Puller machine is a lightweight, portable dent puller that's popular in many body repair shops. Fast Pullers are fabricated from aluminum and are fixed to the ground through a vacuum suction base. Designed for use at nearly any workstation, Fast Pullers offer 550 lbs. of pulling power. They include the base with wheels, tower, chain, and ratchet system. (Multi-hook is available separately.) Benefits: * Easily move between work bays * No waiting for open work bay; pull dents anywhere in the workshop * Avoid potential damage due to poor placement of supports in the vehicle * Safe work, avoiding damage and injuries * Use on vehicles without footrests * Fast repairs = fewer courtesy vehicles.
Not Yet Reviewed
$1,695.00
More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the racetrack, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit's life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems. Additional features include: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Designed for applications making at least 6 inches of vacuum at idle. * Complete tuning from Pro Laptop software, with 8GB of data-logging
( 37 )
$1,597.00
—
$1,727.99
LS motors have a great base for power, but what they really need is something wicked to wake them up. FiTech LS EFI 750 HP fuel injection systems have alarming power, exciting style, and will take you and your vehicle to the edge. FiTech fabricated many aluminum parts for these systems, including the low-profile 102mm billet throttle body, high-volume billet fuel rails, and an intake manifold with a 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mate the 55 lbs./hr. injectors, plug-and-play wiring harness, and color touch screen self-learning ECU. This allows you to program two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on-the-fly. A suction cup mounting bracket puts the controller at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. Awaken the beast and feed its needs with an ultra-performing FiTech LS EFI 750 HP fuel injection system with transmission controller. Additional features: * Programmable touch screen hand-held controller with data log features * 3-bar MAP sensor automatically detects up to 30 psi boost * AN fittings and fuel crossover * 24X and 58X crank and cam-compatible and works with custom cams * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Dual Bosch wideband with dual trim controlled * Knock sensor control * Stainless oxygen sensor bung * Compatible with car and truck coils * Designed for applications making at least 6 inches of vacuum at idle
( 20 )
$2,107.00
On Sale
Does your engine seem like it's always out of breath? Give it a new lease on life and gain some horsepower with Holley high--flow EFI throttle bodies. Made from CNC billet aluminum, they're designed to use the stock TPS and IAC to simplify installation. They include all vacuum ports and linkage required for installation.
( 1 )
$1,749.95
$1,573.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
