Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
21 Results Found For "core support"
HP Tuners CORE Standalone Engine Control Units
Get ready to "Push the Boundaries" with HP Tuners CORE standalone engine control units! Created and designed for gearheads and craftsmen who need the utmost level of customization, CORE ECUs deliver superior control over your powerplant with many features that go beyond the constraints of factory ECUs. They provide all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control. Bringing the CORE ECU to life is HP Tuners' VCM Live software, combining the diagnostics and calibration elements into a single, user-friendly interface. HP Tuners CORE ECUs are designed for all levels of LS swaps and high-performance motorsports builds. Currently CORE supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers. Drag, circuit, off-road racing; drifting, rally, or restomods, no matter what your high performance application, HP Tuners CORE ECU will provide everything you need for total control, performance, and ease of use. Order yours today. Key features: * Up to 16 injector control (fuel) and 8 coil packs (spark) * Sequential injection * Flex Fuel support * Dual throttle body capability * Two built-in Lambda controllers * Internal datalogging--up to 150 channels at 1kHz * 3 CAN bus networks (2 CAN and 1 HPT net) and ethernet connectivity * Turbo boost and anti-lag control * Single-stage On/Off and progressive nitrous control * Launch control * Map switching * A/C control, alternator control, etc.
Not Yet Reviewed
$1,999.99
MechMan Professional Series Core Running Engine Stands
Take your engine builds to the next level with MechMan's Professional Series core running engine stands. Built to withstand the rigors of high performance engines, these stands provide a sturdy and reliable platform for testing and tuning. With their robust construction and precise engineering, you'll be able to get your engine up and running quickly and safely. Perfect for engine builders, tuners, racers, and serious enthusiasts, MechMan running engine stands are a powerhouse tool addition to any workshop. Order the model recommended for your engine application. Multiple mounting options for various engine types: * GM SBC/BBC mount kit – Classic small and big block Chevy support * GM LS Engine (Gen III-IV) mount kit – Modern LS-series compatibility * GM LT Engine (Gen V) mount kit – Gen V direct-injection engine support * Ford Small Block Engine mount kit – Classic Small Block Ford muscle ready * Ford Coyote 5.0L Engine mount kit – Modular Ford muscle ready * Ford Godzilla 7.3L Engine mount kit – Heavy-duty big block power * Toyota's legendary inline-six engines -- Both 2JZ-GTE and 1JZ-GTE platforms
Not Yet Reviewed
$1,549.00
—
$1,749.00
On Sale
Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$1,799.95
—
$2,049.95
$1,618.95
—
$1,843.95
BorgWarner AirWerks Series Turbochargers
The passion of power. BorgWarner AirWerks Series turbochargers provide durable, scalable, strong boost for enthusiasts who want a more powerful replacement or customizable turbocharger. Focused on creating exceptionally high engine performance through forced induction technology, they offer faster spool-up at lower engine speeds and powerful boost for top-end performance. The AirWerks Series includes a range of units supporting 120 to 1,875 hp per turbocharger. Depending on unit selected, features may include: * Innovative extended-tip technology delivers the increased airflow of a larger compressor wheel with the lower mass of a smaller, low-inertia wheel * Next generation Forged Milled Compressor Wheels (FMW Technology) * 360 thrust bearings for increased reliability at higher turbo pressure ratios * Serviceable twin hydrodynamic journal bearings
( 20 )
$1,554.18
—
$1,687.46
On Sale
Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 10 )
$1,999.95
—
$2,199.95
$1,798.95
—
$1,978.95
On Sale
Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,999.95
—
$2,099.95
$1,798.95
—
$1,888.95
On Sale
Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,999.95
—
$2,099.95
$1,798.95
—
$1,888.95
TMI Side x Side Low-Bolstered Suspension Seats
Two doors or four, TMI provides the ultimate seating upgrade to elevate your off-road adventures. Engineered to tackle rugged terrain, their innovative off-road suspension seats are designed for durability and performance in the toughest conditions, and can be easily adapted to fit a wide variety of Side x Side and custom off-road builds. TMI Side x Side low-bolstered suspension seats feature a webbing system inspired by military helicopter seats for superior damping and load distribution compared to traditional tarp-style bases. Each seat is constructed with 2 in. wide nylon compression straps with limit straps integrated into the seat base for enhanced comfort and support. The CNC-designed, mandrel-bent, notched and welded 1 in. O.D. tubing seat frame is finished with a durable powdercoating for greater strength and durability. Upholstered in a water-resistant, high-quality marine-grade vinyl that is UV-resistant for added durability, you can custom the look with TMI's sleek Sport pattern or the premium Double Diamond stitch pattern in one of several color combinations. Additional features: * High-Back design featuring a 2 in. thick high-density molded foam core throughout with low profile bolstering for easy entry and exit * Removable seat base pad for easy cleaning * Integrated seat belt harness slots designed to fit most factory seat belts or 4-point and 5-point harness systems * The universal design easily fits a wide range of front or rear seat applications in most Side x Side or off-road vehicles * Application specific seat brackets available, sold separately
Not Yet Reviewed
$1,726.00
TMI Side x Side High-Bolstered Suspension Seats
Two doors or four, TMI provides the ultimate seating upgrade to elevate your off-road adventures. Engineered to tackle rugged terrain, their innovative off-road suspension seats are designed for durability and performance in the toughest conditions, and can be easily adapted to fit a wide variety of Side x Side and custom off-road builds. TMI Side x Side high-bolstered suspension seats feature a webbing system inspired by military helicopter seats for superior damping and load distribution compared to traditional tarp-style bases. Each seat is constructed with 2 in. wide nylon compression straps with limit straps integrated into the seat base for enhanced comfort and support. The CNC-designed, mandrel-bent, notched and welded 1 in. O.D. tubing seat frame is finished with a durable powdercoating for greater strength and durability. Upholstered in a water-resistant, high-quality marine-grade vinyl that is UV-resistant for added durability, you can custom the look with TMI's sleek Sport pattern or the premium Double Diamond stitch pattern in one of several color combinations. Additional features: * High-Back design featuring a 2 in. thick high-density molded foam core throughout with racing-style, high-profile bolstering for maximum support in extreme off-road conditions * Removable seat base pad for easy cleaning * Integrated seat belt harness slots designed to fit most factory seat belts or 4-point and 5-point harness systems * The universal design easily fits a wide range of front or rear seat applications in most Side x Side or off-road vehicles * Application specific seat brackets available, sold separately
Not Yet Reviewed
$1,726.00
On Sale
Roush 2011-14 5.0L F-150 Phase 2 Replacement Supercharger Fuel Charging Assemblies
Roush 2011-14 5.0L F-150 Phase 2 replacement supercharger fuel charging assemblies are key components of the Phase 2 supercharger kit (P/N 421435), designed to boost the 5.0L Coyote V8 engine by replacing the stock intake manifold with a high-efficiency TVS2300 unit. These assemblies include the upper/lower intake manifolds, fuel injectors, rails, and a 60mm twin throttle body, delivering up to 727 hp. Key components and details: * Supercharger unit: Features the R2300 TVS (Twin Vortices Series) 2.3L roots-type positive displacement blower * Intake manifold: Redesigned upper and lower aluminum manifolds designed for increased airflow * Fuel system: Includes upgraded high-flow fuel injectors to support the increased power demands of the Phase 2, which offers more power than the Phase 1 * Throttle body: Twin 60mm throttle body with a matching spacer to maximize air intake * Performance: Designed to work with the Phase 2 calibration to provide significant power gains (appx. 210 hp and 150 lbs.-ft. over stock). * This assembly serves as the core, top-end replacement component for upgrading the 2011-14 F-150 5.0L to higher performance levels, often referred to as the "blower" or "supercharger top-end" in the kit.
Not Yet Reviewed
$2,127.00
$1,914.30
APR Intercooler Systems
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$1,549.95
Rhino-Rack USA Soft Shell Roof Top Tents
The Rhino-Rack softshell tents sets up quickly and accommodates one to two people. Functionality and simplicity is the core of their design. The tents include an innovative mounting system, an LED light, and storage pockets. Simply pull down ladder and tent pops open like a book. The tents are made from 600-denier rip-stop, polyurethane-coated polyoxford material and easily mounts in the top channels of your roof rack or truck bed rack. Lightweight and simple to set up, the Rhino-Rack soft shell roof top tents are perfect for road trips and weekend camping adventures. Product Overview: * Sleeping capacity for up to two adults * Tent is constructed with weather-resistant and flame-resistant materials (CPAI-84 compliant fabric) * Aluminum base frame * High-density foam mattress—easily stores inside the tent when closed * Awning over front door and rear window allows ventilation in all weather conditions * Telescoping ladder can be mounted on sides or rear of vehicle * Tested for vibration/durability, rain penetration, static load and city crash * LED strip light and boot bags included * Corrosion tested stainless steel hardware * Includes a tent, ladder, mounting system, hardware and tools * Tent can be installed/removed in approximately 5 minutes (after initial set up) using the innovative, Rhino-Rack designed mounting system * Storage bag included to safely store tent when not in use Note: Ensure your vehicle roof has a load rating higher than the weight of both the tent and any mounted accessories, and a static load limit that can support the tent in use.
Not Yet Reviewed
$1,799.99
Mishimoto Intercooler and Pipe Kits
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,600.95
Mishimoto Intercoolers
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
( 2 )
$1,600.95
—
$1,954.95
PWR North America OE Fit Radiators
Optimize your cooling power with PWR North America OE fit radiators. They are built using the latest aluminum core designs and manufacturing techniques by highly skilled fabricators and welders. These PWR OE fit radiators bolt directly to your stock core support for an accurate fit and a hassle-free installation. PWR North America is a world leader in providing quality cooling solutions designed to meet demands across a wide range of industries. Select the OE fit radiator that is suited to your application needs.
Not Yet Reviewed
$1,519.00
—
$1,915.00
Bestop Supertops for Trucks 2
Bestop offers full soft top coverings for your pickup truck bed that are lightweight and simple to install. Built with the same core characteristics as the original Supertops for Jeeps, these Supertops 2 for trucks provide high-quality, durability, easy collapsibility, and one-of-a-kind styling. They take truck bed coverage and storage to a new level by offering a sturdy, adaptable, and cost-effective truck top alternative. A black powdercoated frame clamps to the bed without drilling and supports the sailcloth fabric. This material is the same weather-, stain-, and mildew-resistant fabric used on the Jeep Supertops, so you know it's made to last. The innovative frame assembly collapses the bows and top forward toward the front of the bed, allowing oversized items to be loaded without completely removing the top. Order the model designed to fit your truck application.
( 3 )
$1,549.99
DeWitts LS Modified Pro-Series Radiator Modules
DeWitts LS Modified Pro-Series radiator modules are the complete radiator and fan assembly. They are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Over a hundred models are available (crossflow or downflow) for vehicles from the 1950s, '60s, '70s, and '80s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle. Each module includes a fan assembly for a quick complete installation.
( 18 )
$1,521.99
—
$1,987.99
DeWitts HP-Series Radiator Modules
DeWitts HP-Series radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.25 in. cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts HP-Series radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 8 )
$1,632.99
—
$1,791.99
DeWitts HP-Series Radiators
DeWitts HP-Series direct-fit aluminum radiators provide maximum cooling for high performance vehicles. They include features like two rows of 1.25 in. wide cooling tubes, press-formed end tanks, serpentine fins, and factory-type upper and lower channels—plus, they're epoxy-free! Each radiator core is assembled and brazed in a state-of-the-art aluminum brazing furnace. DeWitts Direct Fit is the company's official trademark, and it means your radiator will fit without modifications.
( 16 )
$1,764.99
—
$1,923.99
Griffin Performance Fit Radiator Combos
Griffin Performance Fit combos offer the right fit with the right performance--and the right price! These high performance combos deliver cooling capability for extreme horsepower mixed with modern styling, do-it-yourself installation, and American craftsmanship. In these perfect combinations, Griffin packages their lightweight aluminum radiators constructed with 1.25 or 1.50 in. induction-welded MegaCool tubing, high performance electric fans, hand-formed aluminum shrouds, wiring harnesses, and radiator caps for a complete install. Choose the style and size needed to equip your ride with the ideal solution for engine temperature control--Griffin Performance Fit combos. * Griffin Performance Fit radiator combos may require modifications for installation. * See Griffin Exact Fit radiator combos for installation with no modifications.
( 239 )
$1,596.00
DeWitts Direct-Fit Pro-Series Radiator Modules
DeWitts direct-fit pro-series radiator modules are sold as a complete drop-in radiator with included fan assembly. They are designed specific to fit each application and will outperform the OEM unit by a large margin when talking cooling efficiency. Available for automatic or manual transmissions.
( 49 )
$1,526.99
