Availability
If you're big into performance, we can't stress enough the major importance of jetting your nitrous system. Many racers casually assume that a jet is a jet--that all are created equally. However, Nitrous Outlet suggests that precision manufacturing and the jet design can make a huge difference in performance. These flare jet packs are the most common type. They're offered in many configurations to accommodate virtually every nitrous system; plus, each jet is stamped with the orifice size for easy identification and selection. To meet your power and tuning needs, use Nitrous Outlet jets!
( 2 )
$1,590.99
JET Cyclone dust collectors deliver the efficiency you want and need for your shop. Dust particles may not always be initially visible, but as you sand and cut, they settle across your machinery. JET Cyclone dust collectors are available in several models that include direct mount filters, radio frequency remote controls, and large collection bins to take your shop's capabilities to a new level. They are also fitted with swivel casters, making it easy to move units around the shop. For a work area that is safe, clean, and efficient, choose the JET Cyclone match for your shop's needs. Features and benefits: * 2-stage separation provides more working CFM than comparable horsepower single-stage units * Heavy debris is pulled down to collection drum before debris stream reaches the filter, providing constant suction * Direct mounted filter eliminates inefficiencies from ridged flex hosing and bends * Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below * Heavy debris is captured in a drum with quick-release levers and independent casters for quick emptying * Included radio frequency remote control works from up to 50 feet away * Double paddle manual cleaning system quickly cleans the pleated filter * Remote timer settings allow system to run for 2, 4, 6, or 8 hours before automatic shutoff (not on all models)
Not Yet Reviewed
$1,869.00
Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.
( 13 )
$1,772.99
Jet combination belt and disc sanders offer plenty of workshop versatility. A quick-release belt tension lever makes belt changes easy, while a quick-lock dust cover allows fast disc changes. These combo sanders are available in a variety of configurations and foundation supports—from portable benchtop models, to open or closed stand bases.
Not Yet Reviewed
$1,979.00
You won't believe how smoothly these JET bench grinders run! They are great power tools that show tremendous attention to detail. Well-built, with a powerful motor, these bench grinders are more than capable of handling any job that the average homeowner would encounter, as well as withstand the high-volume demands of even the busiest shops. These high-quality machines are designed to grind, sharpen, and smooth out rough material surfaces—delivering work power and pristine finishes! Additional features: * UL listed * Totally enclosed pre-lubricated ball bearings * Rubber mounts prevent movement * Cast iron wheel guards and dust vents * Includes aluminum oxide grinding wheel * One-piece quick-adjusting spark guards * Large eye shields with quick adjustment * Adjustable tool rests * Fine and coarse vitrified grinding wheels included
( 4 )
$2,006.99
JET drill presses are manufactured with the weight and rigidity to maintain the tight tolerances required of metalworking applications and to provide a solid base for drilling. They feature a rugged cast iron design with ground-steel columns and an adjustable depth stop for drilling accuracy in metal, wood, and plastic. The head casting on these units includes a ball bearing spindle assembly, supported by four permanently lubricated, heavy-duty ball bearings that are mounted in an enclosed quill for extended life. Additional perks include a 45 degree table tilt, hinged metal belt, and pulley cover. They're ideal for use in maintenance shops and for industrial applications. Select the model that best suits your workshop needs.
Not Yet Reviewed
$1,649.00
FAST XFI 2.0/XIM Super Cobra jet engine wiring harnesses are designed to integrate with the factory vehicle harness, switch panel, and other components of Cobra Jet engines. It's the same system used by top NHRA and NMCA Stock Eliminator and Super Stock racers such as Anthony Bongiovanni, Gary Richard, Jeff Roell, P.B. Candies, Randy Eakins, Roy Hill, Don Bowles, Susan McClenaghan and Chuck Watson. The wiring harness offers several mounting options for the ECU and ignition module. It also features heavy-duty heat and abrasion-resistant sheathing with heat-shrink-sealed ends on the underhood portion. There's double EMI shielding on critical harness leads, plus durable braided nylon sheathing on the under-dash portion of the harness. It's compatible with Ford 5.4 Modular and 5.0 Coyote engines, either naturally aspirated or supercharged. Each harness includes a detailed vehicle-specific installation guide for integrating the engine harness to the factory switch panel, factory Launch Control/2-Step function, and factory gauges. This allows for simple data-logging of factory-installed sensors like fuel pressure, oil pressure, and brake pressure into the XFI 2.0 ECU. No cutting or trimming is required if the FAST XFI 2.0/XIM Super Cobra jet engine harness is installed as directed. This saves 30-40 hours building labor and results in a neat, factory-appearing installation. Every harness is also 100 percent tested to ensure optimum performance.
Not Yet Reviewed
$1,528.95
JET 14 in. SFX steel frame band saws redefine the line between functionality and affordability. They are built with heavy-duty tubular steel welded construction, robust stamped steel doors with welded steel pin hinges, and a heavy-duty base, allowing for stability and durability when sawing large work pieces. They are equipped with large, cast iron tables, a machined aluminum fence system highlighted with easily visible measurements for the most accurate cutting, JET's easily adjustable blade guide system with over 13 in. of resaw capacity, and dual 4 in. dust ports for maximum dust collection efficiency. JET 14 in. SFX band saws provide the woodworker all the premium features of a higher end saw with superior performance to complete any project. Additional features: * Blade tensioning wheel located on top of the saw for better work piece clearance when cutting * Convenient 115V AC outlet location for optional accessories * Deeper table with a massive 360 sq. in. of cast iron work surface for greater work piece support * Engineered diecast and steel trunnion system, allows for single point adjustments when moving table * Independently adjustable, upper, and lower ball bearing blade guides * Oversized lower bearing bolt pattern for maximum strength and rigidity
Not Yet Reviewed
$1,599.99
JET offers heavy-duty, 4-jaw cast iron chucks for use with a variety of geared head lathes. These replacement parts are manufactured from original specs to ensure proper fit and performance. Order the size and model recommended for your machine.
Not Yet Reviewed
$1,796.99
Ford Performance Parts Cobra Jet carbon fiber hoods are for off-road use. These are the same hoods as used on the 50th Anniversary Cobra Jet race cars with the power dome for added clearance.
( 1 )
$1,724.99
Nitrous Express Ford 4-valve nitrous plate systems feature a billet nitrous plate that fits between the throttle body and intake making installation quick, simple, and attractive. They include jetting for 50 hp to 300 hp and can be purchased without bottle or with a 5, 10, 12, or 15 lb. bottle, all of which include the billet aluminum Lightning 500 bottle valve. Nitrous Express Ford 4-valve plate systems include: * Billet aluminum and carbon fiber nitrous and fuel solenoids for ultimate performance and weight savings * Schrader valve fuel rail adapter for simple fuel system hook-ups * Wide open throttle switch * 4 AN nitrous feed line * Master arming switch * Relay and relay harness * All necessary hardware to complete installation
Not Yet Reviewed
$1,957.35
Never be satisfied with the status quo! It is time for the next generation in crossbar nitrous plate technology. The CNC machined design eliminates round spray bars resulting in excellent atomization and cylinder distribution without rotation, sagging, or the disruption of airflow. These CNC-machined plates include a nitrous bottle with a custom solenoid. The Lightning Series solenoids feature CNC aluminum bodies with an integrated purge port, which allows for connecting a purge valve directly to the body of the nitrous solenoid, for less plumbing and clean looks. The kits also come with fittings, lines, switches, relays, and every nut, bolt, and electrical connector needed for installation.
( 4 )
$1,569.05
—
$1,692.85
The Nitrous Express 5.0 Coyote high-output plate nitrous system was designed to give you the ultimate in performance, quality and ease of installation. The foundation of the system is in the NX billet aluminum/carbon fiber Lightning Series solenoids and billet aluminum nitrous plate. Lightning Series solenoids are renowned for their reliability and innovative design that's proven to improve horsepower. The billet aluminum nitrous plates are built to provide the best atomization possible, increasing performance. Each system includes an AutoLearn TPS switch, allowing you to quickly and easily set up the switch to activate the nitrous at wide-open throttle. A direct plug-in fuel line adapter is provided to further simplify installation by connecting to the factory fittings; no need to cut the factory fuel lines. Also included in the kits are: the Nitrous Express Lighting 500 bottle valve, extra-long stainless braided N20 lines, stainless bottle brackets, and all necessary hardware for a professional installation. Maximize your Coyote's potential with a Nitrous Express 5.0 Coyote high-output plate nitrous system.
Not Yet Reviewed
$1,909.21
Power up your motorcycle or ATV with Nitrous Outlet powersports nitrous nozzle systems. These single stage systems include all of the necessary components needed to install a wet or dry direct port nitrous system on your ride with your choice of an aluminum nozzle, aluminum nozzle with a jam nut, or a stainless steel nozzle. Kits are available with or without aluminum nitrous bottles. Available for single, twin, 3-, and 4-cylinder engines, these Nitrous Outlet Powersports nitrous nozzle systems are designed to be high flowing for instant nitrous delivery and include the highest quality parts available.
Not Yet Reviewed
$1,550.99
If you have a carbureted vehicle and you're on a budget or are just getting started, Nitrous Express Stage 6 nitrous systems could be the ideal beginning point. They're tunable to deliver power boosts in six graduated increments, from 50 hp all the way up to 300. That means you can pick one of the lower increases for an engine that's close to stock, and then ramp things up later on when you add forged pistons. Systems include: * Nitrous distribution plate * Supply hose and fittings * Solenoids * Switches * Wiring * Jets * Mounting hardware * Race fuel required for increases above 150 hp
( 8 )
$1,688.25
—
$2,138.63
If you're just getting into nitrous, or are on a budget, and you're looking for a powerful basic system that you can upgrade to higher performance later on, Nitrous Express has the answer. Their Hitman Plus systems can deliver from 50 to 200 hp, in 50 hp increments, right out of the box. However, you can upgrade them to 300 hp just by changing the nitrous solenoid and jetting, or you can jump up to full Stage 6 levels whenever you want. Kits include the nitrous distribution plate, bottle and mounting brackets, supply hose and fittings, switch, wiring, and solenoids.
Not Yet Reviewed
$1,620.01
—
$1,784.29
On a budget, but still looking for nitrous for your carbureted ride? Hitman nitrous systems from Nitrous Express can deliver the goods--from 100 to 200 hp, in 50-hp increments--at a price that will appeal to the budget-conscious. They're also great introductory systems if you're just getting into nitrous. On top of that, they feature the "Next Generation" Phase 3 distribution plate that delivers superior distribution and atomization of the fuel and nitrous. Plus, there are no spray bars to sag, split, or disturb airflow into the manifold. The kits include an optional nitrous bottle with a Pure-Flo valve, stainless steel mounting brackets, solenoids, a supply hose, fittings, a switch, and wiring.
( 3 )
$1,542.22
Pace Edwards JackRabbit tonneau covers retract automatically with the turn of a knob, and close easily using a pull strap. The covers open and close without needing the key, have locking positions every 12 in., and automatically catch into each position as you pull them forward. They also have a low-profile, aerodynamic design that is 100 percent flush-mounted with textured finish rails and top cover. Featuring a speedy clamp-in design—and the handle and lock are mounted to the driver side for easy accessibility. Other features: * Weather-resistant, padded polymer cover laminated to rigid aluminum panels * Inside rail mount design for a low-profile, sleek, and stylish appearance * 100 percent no-drill advanced mounting system * Superior scratch-resistant finish on aluminum trim * Independent latch and lock mechanism with built-in pull strap
( 5 )
$1,506.00
—
$1,636.00
On Sale
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$2,049.95
$1,618.95
—
$1,843.95
On Sale
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,949.95
$1,753.95
Chevrolet Performance SuperMatic transmission control systems make it easy to connect and cruise. These controller kits complement the ready-to-run convenience of your crate engine with plug-and-play operation. There is no additional wiring, and the leads are clearly marked to link up with the engine control harness. SuperMatic control systems are pre-programmed to provide full-function transmission operation after completing the connections. No laptop programming is required. Chevrolet revised the systems with a more compact design for a headache-free installation with your carbureted small block, big block, or ram jet engine—and they're compatible with OBDII code readers. Get in gear with the simplicity and improved shift performance offered by Chevrolet Performance SuperMatic transmission control systems.
Not Yet Reviewed
$2,120.96
Stromberg BIG97 carburetors feature 55 percent increased airflow to put out a whopping 250 cfm! They have the same standard 97 outside shape, but use enlarged 1.175 in. venturi with a super-efficient 20 degree entry angle. The accelerator pump discharge jets are smaller, and flared exit cones build power by slowing down the mixture to reduce turbulence into the manifold plenum. The result is 250 cfm. Stromberg BIG97 Tri-Power carburetors feature: * Signature 97 outside shape and styling * Cast iron base * Reinforced airhorn * Early plenum effect: allows all cylinders to draw from both barrels, giving you dual-plane drivability with a single-plane style top-end horsepower * New power valve circuits improve fuel conditioning: feeds top-end enrichment directly into the emulsion tubes * Ported distributor vacuum: switch in the brass plug (included) and connect your distributor to improve combustion efficiency in cruising mode; you'll run smoother and cooler, with more torque and better fuel mileage * Big S-jet twin-ball inlet valve: accepts 5/16 in. hard line and standard Stromberg fuel fittings * Four finishes available: original equipment style, chrome, chrome/black, or barn find (patina)
( 3 )
$1,560.00
—
$1,645.00
Nitrous Outlet Stinger Plate nitrous oxide systems feature a second generation Stinger plate designed to work with either 4150 or 4500 flanged carbureted-style intake manifolds. The new billet aluminum Stinger plate has a larger conical cone than the previous version and is based off of the same technology as the Nitrous Outlet Nitrous Puck, enabling them to delivering up to 600 hp with proper jetting. The plate features 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet Stinger Plate nitrous oxide systems include nitrous and fuel solenoids, solenoid brackets, a main feed line, relay, harness, jetting, hardware, and wiring.
Not Yet Reviewed
$1,503.99
—
$1,655.99
Tuxedo M-1000C motorcycle lifts are ideal for working on motorcycles, snowmobiles, ATVs, jet skis, and more. These air-powered lifts are capable of lifting up to 1,000 lbs. They feature a 30 in. working height and extra-large platform for keeping everything within reach while you work. Plus, you can choose from a range of accessories to customize the table to your preferences. Get your vehicle lifts from a company known for their commercial-grade reliability and toughness by ordering Tuxedo M-1000C motorcycle lifts. More product features include: * Choice of sliver powdercoated (M-1000C) or black powdercoated (M-1000C-BLK) finish * Minimum height – 7 in. * Overall length with ramp - 108 in. * Overall width with side extensions (sold separately) – 47 in. * Available accessories include side extensions, a motorcycle vice, a front extension, and a mini jack
Not Yet Reviewed
$1,676.99
—
$1,831.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
