Availability
Showing In Stock Items. Show All 6 Items.
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$1,549.95
—
$1,999.95
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$1,895.62
Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.
( 41 )
$1,549.95
—
$1,849.95
FAST has taken the next step in making EFI easier with these fuel system kits. They cover all street performance applications and most bracket and super class drag racing categories. FAST fuel system kits are perfect for those switching from carburetor to EFI, building new EFI engines, or simply upgrading their current fuel system. In one part number, they include everything you need to supply your state-of-the-art high performance fuel system. Best of all, the components used to create the FAST fuel system kits are made of aluminum and stainless steel to ensure years of long, trouble-free service. Kits include: * Fuel pump * Filter * Y-block(Depending on kit) * Fuel regulator * System fittings * Wiring harness
( 3 )
$1,760.95
Bitten by performance! Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate systems include everything you need to spray 50-600 hp. They feature plates with unique, extended reach, cone-shaped "stingers" with many discharge ports for fuel and nitrous. The design covers a 360 degree pattern that completely saturates the air intake charge for precise, even atomization. These plates are CNC-machined from 6061 billet aluminum with black anodized bodies and red anodized stingers—as well as being engraved with Nitrous Outlet logo and fuel/nitrous ports. Sharpen your track performance with a Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate system.
Not Yet Reviewed
$1,504.99
—
$1,543.99
March Performance Ultra Style serpentine systems are designed to convert your standard V-belt pulleys to a single ribbed serpentine belt. The kits are available for Mopar, Chevy, Ford, Oldsmobile, Pontiac, and Buick engines—so they are likely to have your application covered. These systems include billet aluminum pulleys that are clear powdercoated, along with the correct brackets and mounting hardware. March Performance Ultra Style serpentine systems are available with or without power steering to suit your specific vehicle.
( 11 )
$1,547.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
