Availability
Hayden Automotive offers fluid coolers in a variety of sizes and materials. These units help to extend the life of your vehicle by lowering operating temperatures. Coolers are available for many types of fluids, including transmission, hydraulic, and power steering; as well as engine coolant, diesel fluid, and engine and differential oil. Order the universal or vehicle-specific model needed for your application.
( 170 )
$1,799.99
American Racing Headers late model Ford Mustang headers are available for a wide variety of Mustang engines and models; every set provides a serious bump in horsepower and torque. Select headers come with an X-pipe standard, if you prefer a more classic muscle-car sound, swap the X-pipe for an optional H-pipe. Either choice provides a low-rasp, drone-free driving experience. ARH Direct Connect kits for Mustangs are designed to work with original equipment cat-back systems without any cutting or welding. For Corsa cat-back exhaust systems, check out ARH's Direct Connect kit specifically made to work with Corsa cat-backs. ARH Mustang headers with Bottleneck Eliminator kits do away with the 2.25 in. restriction at the cat-back connection point of some OE 5.0L systems. They are specially built to fit aftermarket cat-back systems; a simple mark and cut (no welding required) mates the ARH Bottleneck Eliminator to your cat-back. ARH long system headers for 2012-14 Boss Mustangs even allow you to keep the Boss side pipes. Additional features of American Racing Headers late model Ford Mustang headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The only headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only
Not Yet Reviewed
$2,073.35
DeWitts HP-Series radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.25 in. cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts HP-Series radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 15 )
$1,547.99
—
$1,897.99
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 17 )
$1,531.99
—
$1,796.99
DeWitts Pro-Series direct-fit radiator modules install in the stock mounting position and use the factory connections without any modifications or adapters. Expertly assembled and then furnace-brazed, their epoxy-free cores feature two rows of 1.00 inch cooling tubes and a serpentine fin. The radiators' press-formed end tanks are manually TIG-welded by skilled craftsmen to provide the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch; some models also have a built-in transmission cooler. DeWitts Pro-Series direct-fit radiator modules are available in crossflow and downflow styles, as well as a range of sizes for vehicle-specific applications.
( 41 )
$1,526.99
—
$1,685.99
Bilstein Black Hawk Powersports coilovers are specifically engineered to vastly improve the performance of your UTV. These direct fit shock and coil spring assemblies offer position-sensitive damping and 4-way adjustability, all features that will take your UTV to the next level. Black Hawk Powersports feature Bilstein's patented ZoneControl position-sensitive technology that contains five independently tuned damping zones—three compression and two rebound. ZoneControl incorporates an internal Jounce Cut Off system (JCO) which is effectively a 2-stage hydraulic bump stop. The JCO has a 10-position clicker that allows the rider to fine-tune bottom-out control. For rebound, ZoneControl features a Rebound Cut Off (RCO) that acts to settle the vehicle at the final stage of suspension droop. The RCO will protect the damper, eliminating the need for a limit strap. Black Hawk Powersports offer four unique external adjustments: high/low speed compression, rebound, and JCO—all easily accessible and ready for quick damping changes on the fly. Bilstein Black Hawk Powersports feature an all-aluminum design with gold finned reservoirs. All applications come with Dual Rate Coils and crossover nuts for easy ride height and spring preload adjustments. Black Hawk Powersports are completely serviceable and designed to be race-ready right out of the box. This extremely versatile coilover package will provide excellent comfort and unsurpassed bottom-out control. Experience a unique "bottomless" ride with Bilstein's new Black Hawk Powersports coilover packages, available separately for front and rear applications.
Not Yet Reviewed
$2,025.00
Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.
Not Yet Reviewed
$1,537.95
—
$2,178.95
Not all multi-disc converters are created equal, and with BD Diesel's Triple Torque Force, less is more. To start, BD's in-house CNC-machined cover is designed as one piece, which prevents warping, improper balancing, and leakage. With this design, BD was able to maintain the factory height, thus eliminating the crowding of the pump and the possibility of premature wear. BD Diesel has engineered the dampener for better balancing by riveting it in place, eliminating welding, which can cause warping and affect balance. Each dampener spring is hand-picked to ensure softer engagement. They added notches to the clutch material to prevent fluid adhesion, thus ensuring that even in fluid coupling, the clutches will always have lube. They offer tighter engineered tolerances and a self-centering, 36-external/32-internal, trapezoid-shaped clutch tooth design that enables more contact surface to ensure that the clutch plates properly align, resulting in less friction wear, a longer converter life cycle, and firmer drivability. The clutch plates are also precision-ground flat for smooth operation and consistent wear. Not only will these converters last longer, but they also have 3 times the torque-holding capacity! Triple Torque Force converters come with BD's engineered cast aluminum X-Stator that has fin lengths, angles, and curvatures that are designed to deliver a fluid coupling engine rpm transfer of up to 95 percent, vs. 75 percent with stock stators. This efficiency reduces engine temperatures, increases fuel economy, and better matches the torque curve of the engine, resulting in more torque and horsepower being delivered to the ground. The overall weight of the BD Diesel Triple Torque Force converters has been reduced by 12 lbs. compared to the competition, resulting in better fuel economy and less wear and tear.
( 2 )
$1,624.95
South Bend Clutch Dyna Max feramic clutch kits are manufactured with full feramic lining on a marcelled fin. The kits offer modified pressure plates for a higher plate load and smooth clutch engagement. South Bend Clutch Dyna Max feramic clutch kits help you to resolve premature disk failure from high horsepower or heavy hauling and they're available with or without a flywheel.
Not Yet Reviewed
$2,321.08
PWR North America radiator modules are revolutionary advancements in cooling technology. These aluminum modules incorporate Spal fans for reliable high performance cooling. The radiators feature a reinforced, race fin design cross-braced for maximum strength and durability, along with a unique shape with a hemmed leading edge for additional cooling and maximum durability. Developed using PWR's current F1 and NASCAR cooling technology, their cores provide unmatched performance. You too can now have the same cooling technology for the street as the top motorsports champions use week-after-week.
( 2 )
$1,765.00
—
$2,169.00
Wagner Tuning EVO II Competition intercoolers outfit your vehicle with a better design, more airflow, and increased performance. The EVO II units provide additional frontal area and volume compared to their first generation models. Wagner Tuning enlarged the frontal area and raised the efficiency even more to work flawlessly with the improved end tank designs. The result is unrestricted flow and increased charge cooling properties. Competition intercoolers are engineered with some of the highest quality and lowest weight tube and fin cores available. The inside turbulators and free-form cast aluminum end tanks are optimized by CAD for the best possible internal airflow. Wagner Tuning EVO II Competition intercoolers are finished with an anti-corrosion protective coating with perfect heat-dissipating properties. Order the model for your application.
Not Yet Reviewed
$1,600.00
—
$1,830.00
Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.
Not Yet Reviewed
$1,940.00
Don't let high temperatures set you back in the pack! PWR North America lightweight Late Model Dirt and Pavement radiators feature the new 36mm core technology that fits more rows of tubes and fins in the same height, thus allowing for the use of a thinner core, which improves airflow through the core. PWR furnace-brazes their radiators, therefore, these units can withstand greater pressures than the 56mm, 2-row cores in PWR's standard style radiators. These race-proven radiators fit the same footprint as their standard radiators, so installation is simple—no changes to the ductwork, mounts, or plumbing are needed. Wet weight is reduced by as much as 8 lbs. Combined with PWR's pressurized cooling system, you can run higher operating temperatures and smaller duct work openings, resulting in greater control of the water contact in critical areas of the engine. Trust PWR North America for all of your cooling needs.
( 1 )
$1,729.00
Maintain your engine's heat transfer with a Spectra Premium charge air cooler. They feature all-aluminum construction and are assembled from component tubes, fins, and internal fins. The intercoolers are then vacuum-brazed together, forming a single-piece core. The resulting structure is tremendously strong due to the reinforcement provided by external and internal fins. After the charge air coolers are assembled and brazed, the end tanks (or manifolds) are welded onto the core. These replacements are available for a wide range of diesel applications from 1990 and up.
Not Yet Reviewed
$1,504.99
—
$1,852.99
Wagner Tuning EVO III Competition intercoolers outfit your vehicle with a better design, more airflow, and increased performance. The EVO III units provide additional frontal area and volume compared to their first generation models. Wagner Tuning enlarged the frontal area and raised the efficiency even more to work flawlessly with the improved end tank designs. The result is unrestricted flow and increased charge cooling properties. These Competition intercoolers are engineered with some of the highest quality and lowest weight tube and fin cores available. The inside turbulators and free-form cast aluminum end tanks are optimized by CAD for the best possible internal airflow. In addition, the Competition intercoolers are finished with an anti-corrosion protective coating with perfect heat-dissipating properties. Experience the ultimate performance upgrade with the EVO III Competition intercoolers by Wagner Tuning.
Not Yet Reviewed
$1,590.00
PWR North America radiators are a revolutionary advancement in cooling technology. These aluminum radiators feature a reinforced race fin design cross-braced for maximum strength and durability, and they have a unique shape with a hemmed leading edge for additional cooling and maximum durability. Developed using PWR North America's current F1 and NASCAR cooling technology, PWR's cores provide unmatched performance. You too can now have the same cooling technology for the street as many top-podium motorsports champions use week-after-week with PWR's radiators. Select the radiator for your application and discover the PWR difference!
Not Yet Reviewed
$1,519.00
—
$1,659.00
aFe BladeRunner GT Series intercoolers feature a bar and plate core design that outflows stock intercoolers by increasing heat dissipation over the much smaller tube and fin design used by the OEM. The unique BladeRunner end tanks are constructed out of 3/16 in. aluminum plates that incorporate seven Multi-Directional Vanes (MDV) throughout the intercooler. This aFe technology is used to direct hot air flow through the entire intercooler core, which allows for greater cooling. aFe BladeRunner GT Series intercoolers are100 percent TIG-welded by certified craftsmen for race-quality strength and durability. They are pressure tested at 200 psi.
( 5 )
$2,007.60
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
