Availability
Showing In Stock Items. Show All 32 Items.
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,850.00
These TCI PRO-X torque converters are designed specifically for Top Sportsman, Top Dragster, and Outlaw Street Car classes. Able to handle 2,500+ hp applications (including multi-stage, nitrous-assisted, supercharged, and twin turbocharged engines), these high-strength torque converters feature a TCI exclusive--HDT (Heat Dissipating Technology) Coating--further enhancing their ability to deliver unsurpassed consistency and durability. Features include: * Hand-built steel stator * Forged mounting cover * 3 sets of heavy-duty internal bearings * Furnace-brazed turbine and pump assembly * Built for GM, Ford, and Chrysler transmissions * 4 or 6-bolt flanges and optional billet front available
Not Yet Reviewed
$1,815.95
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$1,645.95
Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.
( 30 )
$1,964.99
Summit Racing™ TH400 transmission cases are a street/strip version of the TH400 aftermarket SFI transmission case. The bellhousing is not included and must be purchased separately. A direct replacement for the GM case, Summit Racing™ cases use a permanent mold casting to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. The 2-piece design allows them to be used with all popular engines by simply changing bolt-on bellhousings. Features include: * Speedometer and governor provisions * Longer band anchor pins captured by oversize bosses * Multiple external pressure taps allow for monitoring of circuit pressures * Accepts all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers
( 2 )
$1,899.99
These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.
( 1 )
$1,812.27
—
$2,100.48
FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.
( 16 )
$1,895.00
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$1,975.00
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 4 )
$1,524.48
—
$1,924.97
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$1,975.00
ATS heavy-duty billet torque converters match your first generation Cummins-powered Dodge truck's torque curve with the power needed for street, towing, and performance applications. These converters feature the patented ATS square flank drive design, proprietary clutch material, CNC-cut steels, redesigned stators, Torrington bearings, and stall speeds perfectly mated to your Cummins engine. ATS heavy-duty, non-lockup billet converters completely eliminate the weaknesses of your factory converter and deliver more power to the ground, lower temperatures, and greater overall performance. Features include: * Improved vehicle response * Minimized slip * Improved towing and drivability * Increased reliability * Withstands higher torque loads * Custom stator with high-flow windows * Redesigned spring dampener * Plasma welded for unsurpassed strength * Hardened turbine splines * Unique bonding technology for 100 percent chemical bond (an ATS exclusive) * Note: Must be used if installing a billet flexplate
Not Yet Reviewed
$1,754.99
On Sale
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,699.95
—
$1,949.95
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,685.00
TCI Circlematic automatic transmissions are great for oval track use. However, despite the sound of their name, they also can be used for performance marine applications. All transmissions feature high performance clutches, a steel clutch hub, and a modified planetary gear set that will work with the latest rear suspensions. Many specialty combinations are available.
Not Yet Reviewed
$2,250.95
McLeod Magnum Force clutch kits are the perfect choice for racers looking for lightweight, high-torque capacity units. They are specifically designed for oval track, road race, and dry lake applications. The McLeod Magnum Force clutch kits are offered in single, double, and triple-disc combinations. Available for most input shaft splines, the McLeod Magnum Force clutch kits feature optional pin or strap floaters to rattle and have bolt-on counterweights for balanced engines.
Not Yet Reviewed
$1,695.00
—
$1,895.00
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
McLeod Street Twin clutch kits are designed to be high performance replacements for your OEM clutch. They include everything you need--a new disc, pressure plate, and your choice of a billet steel or billet aluminum flywheel. McLeod Street Twin clutch kits are pre-balanced to fit specific applications and include the correct alignment tool for installation.
( 4 )
$1,755.00
McLeod Drag Mag twin disc clutch assemblies are specifically designed for use at the track. They include a new disc, pressure plate, throwout bearing, and your choice of a billet steel or billet aluminum flywheel. The McLeod Drag Mag twin disc clutch assemblies are pre-balanced to fit specific applications and include the correct alignment tool for installation.
Not Yet Reviewed
$1,895.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
