Availability
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
After installation, DiabloSport modified PCM and inTune i3 packages help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride without popping the hood! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, a DiabloSport inTune i3 tuning device is included to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport modified PCM and inTune i3 package best suited for your ride! More product and specifications include: * The pre-loaded i3 programmer includes dyno-tested performance programs designed specifically for your ride * Responsive high-definition touchscreen that allows you to navigate menus easily while retaining a small form factor * Easily updateable by wi-fi on both Windows and Mac-based operating systems * Multi-vehicle licensing * Scan and clear DTCs * Calibrate speedometer for different tire sizes and/or gear changes * Tune the transmission shift points and firmness * Adjust speed, rev limiters, and much more
( 1 )
$1,549.95
—
$1,949.95
HalTech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or HalTech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits
Not Yet Reviewed
$1,599.00
HalTech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or HalTech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,044.00
On Sale
COBB Tuning Mazda Stage 1 Plus power packages deliver simple, bolt-on tuning solutions with clean, cool air for your engine to breathe, resulting in increased performance. Plus, you can upgrade your Mazdaspeed3 fuel pump internals to keep your fuel supply happy, and add rear motor mounts for increased traction of your newfound power. Packages are available for Mazdaspeed6, too. Order the kit designed for your vehicle application. Additional product features: * Accessport V3 includes OTS maps to make tuning quick and easy * SF air intake system—minimizes turbulence, while maintaining optimal flow * Air box—16-gauge aluminum with wrinkle black powdercoat * Autotech fuel pump internals * Turbo inlet hose—4-ply steel reinforced silicone * Billet aluminum rear motor mount * Mazdaspeed6 Stage 1 Plus packages only include Accessport V3 and SF intake system
Not Yet Reviewed
$1,915.00
—
$2,000.00
$1,723.50
—
$1,800.00
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$1,599.95
Antigravity Batteries lithium deep cycle batteries include a first-of-its-kind Bluetooth Monitoring App, so you can easily check the battery's status using your phone, tablet, or computer. Along with real-time Bluetooth monitoring, these batteries are made with Grade-A UL Listed cells and a state-of-the-art Battery Management System (BMS) to ensure the battery will provide you with years of the safest operation, highest performance, and greatest satisfaction. Direct replacements for lead/acid deep cycle batteries, Antigravity lithium deep cycle batteries are ultra-lightweight for their capacity, being 60 percent lighter than lead/acid models. Choose the model needed. Additional notes: * Fuel gauge on top of battery to check its capacity and more * Safest battery technology using LiFePO4 Lithium chemistry * Automatic self-heating for charging readiness in freezing conditions (not on all batteries)
Not Yet Reviewed
$1,899.99
DiabloSport Modified PCM and Trinity 2 EX Platinum packages are the most advanced performance programmer and monitoring setups available for a large range of applications. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Each of these performance kits include an unlocked PCM, so you can tune in no time and keep your stock PCM safe and unaltered. And even though DiabloSport T2 Platinum programmers are already equipped with some of the best tuning capabilities right out of the box, they know you want to bolt-on upgrades and extract every bit of horsepower possible from your vehicle. That's where CMR custom tuning comes in. DiabloSports's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Pre-loaded, high performance tunes, in addition to custom tuning capabilities; it's the best of both when you choose to unlock your vehicle's potential with DiabloSport Modified PCM and Trinity 2 EX Platinum packages.
( 1 )
$1,699.95
DIYAutoTune MegaSquirt MS3Pro EVO standalone engine management systems are scaled up, more capable units due to the shared technology with their big brother, MS3Pro Ultimate. EVO ECUs by AMP EFI do not have peak and hold injector drivers, but they do share some increased I/O, an onboard 4-bar MAP, barometric pressure sensor, and 5 diagnostic LEDs. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro EVO ECUs will deliver winning control. MS3Pro EVO ECUs feature configurable inputs/outputs: * 10 high-impedance injector outputs * 8 logic level spark outputs * 3 PWM outputs * 2 digital outputs * 7 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro EVO standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$1,899.99
DIYAutoTune MegaSquirt MS3Pro Ultimate standalone engine management systems provide unlimited control of your naturally aspirated or forced induction engine with a staggering list of race-focused features that will get you down the track with excellence. MS3Pro Ultimate ECUs by AMP EFI will log up to 64 channels, conservatively, at 200hz, and is ready to support a wide variety of engines out of the box, as well as over 50 different ignition modes. The units also utilize a compact lightweight case design of sealed high-temperature nylon and heavy-duty AMPSEAL connectors to protect sensitive internals. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro Ultimate models will deliver winning control. MS3Pro Ultimate ECUs feature configurable inputs/outputs: * 10 channel 4:1 or 8:2 programmable peak and hold injector outputs * 8 logic level ignition outputs * 6 digital inputs * 5 digital input/output * 5 PWM outputs * 2 digital outputs * 12 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro Ultimate standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Keep Alive Memory (KAM) * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$2,099.99
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,649.95
—
$2,099.95
Attention sportsman drag racers: Racepak IQ3D digital dash instruments offer a compact, all-in-one solution for data acquisition. Adding a robust, built-in data logger to the popular IQ3, the drag race versions display information on four user-definable pages—and recorded data is stored on a microSD memory card located on the face of the dash for easy access. You can record engine rpm, driveshaft rpm, oil pressure, water temperature, and battery voltage. Smarter racing; get onboard performance that could change the way you compete ... and win, with Racepak IQ3D. Racepak IQ3D drag racing digital dashes specifications include: * Programmable LED shift lights * User-defined 5-character sensor input names * Four programmable external warnings * Shielded, low-luster display for open cockpit use * Can add up to six additional V-Net channels
( 1 )
$1,799.95
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,599.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
