Availability
Showing In Stock Items. Show All 95 Items.
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,702.95
$1,500.75
—
$1,791.95
AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.
( 9 )
$2,106.30
Manley titanium valves feature forged one-piece construction with grain flow, not a head welded to a stem. These jewel-like valves are machined in state-of-the-art CNC turning centers and valve stem grinders to exacting tolerances. Manley utilizes the finest titanium alloys for both the intakes and exhausts, providing the best balance of mechanical properties, hardness, ductility, and fatigue strength at the given temperatures. All Manley titanium valves must pass their rigorous final inspection process, and strict quality control enables them to deliver parts within tight tolerance. Custom valves can be delivered within a very reasonable turnaround time. Seat coatings are also available on certain shelf stock part numbers, as well as on custom valves.
( 3 )
$1,517.31
—
$1,561.93
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
Designed for high performance street/strip engines! Trick Flow® PowerPort® Cleveland 225 cylinder heads feature runners based on the OE Ford 2V design. The heads feature fully CNC competition ported runners with a premium high resolution surface finish for maximum, all-out performance The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 225 cylinder heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.
( 6 )
$1,599.99
—
$1,749.99
World Products Merlin cylinder heads for big Chevys combine large intake runners with open combustion chambers to produce good torque and low-end power. The heads are available assembled or bare; rectangular or oval; with or without intake/exhaust valves; and other options. Order the model that best suits your application.
( 7 )
$1,840.28
On Sale
Looking to increase the performance of your Gen III-powered vehicle? AFR 212cc Black Hawk Gen 3 Hemi cylinder heads are to be offered in as-cast and fully CNC ported versions, either assembled or as no-parts (bare) heads to provide the power and performance Mopar enthusiasts crave. Manufactured using A356 aluminum and permanent-mold technology, AFR castings are second to none. Assembled pairs will come with high-quality components, such as PAC Racing springs, Titanium (CNC versions) or stainless steel retainers, AFR valves, and Viton® valve seals.
Not Yet Reviewed
$2,105.00
$1,999.75
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,933.50
$1,587.50
—
$1,740.15
Edelbrock Victor Jr. CNC Chrysler cylinder heads are designed for high output Chrysler 426-572 HEMI engines. They feature fully CNC ported combustion chambers and CNC blended seats for optimal air flow performance. These heads also feature a revised exhaust valve angle to accommodate larger intake valves and feature brass tubes installed in exhaust pushrod holes to allow maximum clearance with minimal port intrusion.
( 5 )
$1,582.50
—
$1,755.50
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,595.50
Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads are bolt-on performance upgrades for Gen III HEMI engines. They are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories, as well as Hellcat components. The cylinder heads have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and are heat-treated to T6 specifications. Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads feature fully CNC-machined combustion chambers, along with CNC-profiled bowls and port entries/exits for improved airflow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength, and extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from the bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock.
( 3 )
$1,611.50
—
$1,639.50
Victor and Victor Jr. Series aluminum heads are designed using the latest induction technology for outstanding performance and maximum horsepower. They're ideal for the small block Ford Windsor, and small and big block Chevys. Victor Jr. Series heads are perfect for many types of competition and ultra-high performance street machines. They include threaded inserts (heli-coil) in rocker stud and exhaust manifold bolt holes. They have hardened seats and bronze valve guides for strength and durability, and a minimum 9/16 in. deck thickness and machined valve cover rails provide a more consistent gasket seal. Victor Series heads are a step above the rest, for even greater gains in horsepower. All of these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports, and specially contoured combustion chambers.
( 2 )
$2,212.50
Trick Flow High Port® 240 cylinder heads are specifically designed for large cubic inch small block Ford engines as well as engines with high-boost super- and turbocharges, big shot nitrous oxide systems, and other mega-power combinations. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. Top-of-the-line CNC Competition Ported runners with a high resolution surface finish provide maximum airflow and power over the entire rpm range. The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide more material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and raised valve cover rails.
( 4 )
$1,649.99
Chevrolet Performance Bowtie aluminum cylinder heads offer an ideal combination of street drivability and drag-strip performance. These aluminum cylinder heads provide a broad power range with ample low-end torque, along with excellent throttle response, good mid-range torque and enough top-end power to beat your competitors to the finish line. Designed for high performance applications, the Bowtie Street cylinder heads are manufactured to precise machining tolerances, with thick deck surfaces and high-velocity airflow passages. They are available in either rectangular or oval intake port configurations. The rectangular intake ports are larger in volume and have been designed to enhance high-rpm horsepower, which makes them best for vehicles that see frequent drag-strip action. Cylinder heads with oval intake ports are smaller in volume and designed for greater low-rpm torque, therefore they're best for street applications, where lots of bottom end, off-the-line power is desired. Bowtie Street Cylinder Head Technical Notes: * Made from 356-T6 aluminum * Available in rectangular or oval-port designs * Will work on Mark IV and Gen V, VI blocks * 9/16 in. thick decks * As-cast intake and exhaust ports * No heat risers * 1.55 in. valve spring seat diameter * Heli-coiled 7/16 in. screw-in rocker stud holes * Designed for use with 3/8 in. pushrods * Use intake gasket P/N 12366985 and bolt kit P/N 12367959 * Use head gasket P/N 12363414 for bores to 4.370 in. and P/N 12363413 for bores 4.470 in. to 4.540 in. (Mark IV) * Use head gasket P/N 12363412 for bores to 4.370 in. and P/N 12363411 for bores 4.470 in. to 4.540 in. (Gen V, VI) * Use head bolt kit P/N 12367779 Bowtie Oval-Port Aluminum Cylinder Head Assembly: * Completely assembled with 2.250 in./1.880 in. 11/32 in. stem valves * 290cc oval intake ports * 110cc exhaust ports * 110cc combustion chambers Cylinder head is assembled with the following components: * 2.190 in. intake valves * Valve spring retainers * 1.880 in. exhaust valves * Valve locks * Valve springs * Valve seals * Valve spring shims * Rocker arm studs * Pushrod guideplates
Not Yet Reviewed
$1,685.52
Pro-Filer big block Chevy Sniper X cylinder heads are fully CNC-machined for optimum performance. They're designed to be used with standard big block Chevy parts, including stud mounted rockers and pistons or the most wicked parts in the industry. They flow over 460 cfm on a 375cc runner and over 325 cfm on the exhaust. Features include a 5 angle valve job with .350 in. longer intake and .100 longer exhaust valves, 119cc heart-shaped combustion chambers, and 24 degree OEM X275 class accepted valve angles. Wake up your 502 c.i.d. or larger motor with the incredible performance of Pro-Filer big block Chevy Sniper X cylinder heads. Additional features: * Spark plug locations are machined for a gasketed 3/4 in. reach plug NGK R5671A-7 or colder * Requires a 1 in. longer head bolt or stud next to exhaust ports *Available with either 355cc or 375cc intake runners and steel or copper alloy valve seats
Not Yet Reviewed
$2,064.75
Twisted Wedge® 11R 227 cylinder heads represent Trick Flow's ultimate development of the Twisted Wedge® innovation, featuring Trick Flow's most efficient combustion chamber design. The combustion chamber and valve layout move the intake valves away from the cylinder walls to reduce valve shrouding, significantly improving flow at higher lift. Shallow 11° intake/13° exhaust valve angles improve piston-to-valve clearance for high lift cams and reduce chamber volume for improved compression and efficiency. High velocity runners are optimized on the flow bench and dyno proven to outperform the competition on hydraulic roller camshaft engines. Premium materials and components, along with world-class CNC processes, guarantee uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. Machined castings increase strength and have a billet-like appearance. Additional features include CNC-profiled combustion chambers, 2.080"/1.600" stainless steel intake/exhaust valves, Trick Flow® by PAC Racing valve springs, and titanium retainers. Twisted Wedge® 11R 227 heads have CNC Competition Ported runners with a premium high- resolution finish for ultimate performance. Cylinder heads are available fully assembled or as bare castings. Sold individually. Key Features: • 227cc intake ports and 56cc or 66cc combustion chambers • 2.080 in. stainless steel intake valves • 1.600 in. stainless steel exhaust valves • .625" thick deck • Titanium retainers • 11 degree intake valve angle • 13 degree exhaust valve angle
Not Yet Reviewed
$1,524.99
On Sale
Designed for 396-502 c.i.d. big block Chevy engines, these Edelbrock cylinder heads include heavy-duty exhaust valves that provide the added durability needed for marine applications, and have one-piece, stainless steel intake valves with hardened tips and swirl-polished heads. The high-velocity flow capabilities of Edelbrock Performer RPM cylinder heads provide increased torque across a wide rpm range that's ideal for marine use. They're cast from A356 aluminum and heat-treated to T6 specs. Their oval-port heads have 110cc chambers and their rectangular port heads have 118cc chambers. Both the oval and rectangular port heads are hard-anodized to protect the aluminum in the harsh marine environments.
( 2 )
$1,780.50
$1,602.45
Trick Flow® PowerPort® 325 cylinder heads for Ford 429/460 engines deliver significant horsepower and torque gains over other similar-style cylinder heads. Notable features include an extremely efficient chamber design for more complete combustion and exhaust ports raised .270 in. from stock for increased airflow. Trick Flow® PowerPort® 325 heads also feature Trick Flow's® CNC Competition Ported runners and CNC-profiled combustion chambers. These premium high-resolution surface finishes are perfect for building maximum performance. Trick Flow® PowerPort® 325 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 5 )
$1,849.99
—
$1,999.99
Brodix Cylinder Heads Race-Rite oval port cylinder heads for big block Chevys bolt on directly in place of your stock heads, so you can reuse your intake manifold and pistons. Because the stock exhaust ports are in the stock location, you don't have to worry about header or manifold interference. These aluminum heads are great for street and strip applications. They feature 119cc combustion chambers, air conditioner bracket holes, solid phosphorous bronze guides, high-torque 270cc intake ports, a fully machined valve cover rail, and bulletproof rocker stands.
( 24 )
$1,634.99
On Sale
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
$1,519.16
—
$1,655.06
Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 205 head for serious performance enthusiasts and racers. Trick Flow® Twisted Wedge® 11R 205 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge-specific pistons. New high velocity, race-inspired CNC Competition Ported runners have been optimized for today's popular bore and stroke combinations, and have a premium high resolution finish for ultimate performance. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 205 cylinder heads are available fully assembled or as bare castings and sold individually.
( 7 )
$1,524.99
Trick Flow® potent PowerPort® A460 360 cylinder heads for Ford 429/460 are ideal for use in drag racing, monster trucks, tractor pulling, and other ultra-high power, large cubic inch engine combinations. The heads have CNC Competition Ported runners with Trick Flow® top-of-the-line, premium high resolution surface finish for maximum airflow and performance in all-out naturally aspirated or forced induction applications. Other features include big block Chevrolet-style exhaust port openings and a heavy duty 18-bolt mounting pattern for superior gasket retention. Trick Flow® PowerPort A460 360 cylinder heads are available fully assembled or as bare castings and are sold individually.
( 2 )
$1,699.99
—
$2,349.99
Ford Performance Parts teamed up with Jon Kaase to redesign their 429 Cobra Jet cylinder heads, and the results are these Super Cobra Jet heads. They feature revised valve angles and locations to reduce cylinder wall shrouding and improve flow, along with redesigned combustion chambers to accommodate the more centrally located valves. These heads use the same valves, valve springs, retainers, and 7/16 in. stud-mounted roller rockers as the current Ford Performance Parts 429 Cobra Jet heads, and the standard Cobra Jet intake and exhaust manifolds bolt right on. This new design offers a 25-50 HP increase over current Cobra Jet heads, depending upon displacement and camshaft.
( 13 )
$1,772.99
Trick Flow PowerPort® 290 cylinder heads for Ford 429/460 engines deliver significant horsepower and torque gains over similar-style cylinder heads. The heads have Fast As Cast® runners that duplicate the port shape and profile of CNC-ported heads for near-CNC-ported power and performance for about the same price as regular cast cylinder heads. Other features include an extremely efficient chamber design for more complete combustion and exhaust ports raised .270" from stock for increased airflow, Trick Flow PowerPort 290 cylinder heads are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$1,549.99
—
$1,599.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
