Availability
When you're serious about power for your LS or new LT1 engine, call in the AirForce! MSD Atomic AirForce intake manifolds have been designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient paths for improved airflow and distribution to stock and modified engines. Their unique bell-mouthed runner entrances maximize airflow and minimize shrouding--efficiently using the available plenum volume for an unobstructed flow path over opposing runners. The 2-piece molded polymer design resists heat soak, minimizes weight, and allows easy access to the runners for porting. MSD Atomic AirForce intake manifolds accept an OEM or 103mm throttle body, as well as stock, aftermarket, or Atomic LS EFI fuel rails. They are supplied with new gaskets and hardware for a direct bolt-on package. The 103mm throttle bore allows the use of large throttle bodies for greater airflow, and a direct-flow path runner design promotes maximum airflow.
( 19 )
$1,649.95
Chevrolet Performance EFI intake manifolds are ideal stock replacements for your worn or faulty original. These multi-port injection models are made from factory-style materials to OE specifications—for a proper fit and flawless performance. Order the manifold recommended for your vehicle application.
Not Yet Reviewed
$1,717.22
LS Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.
( 1 )
$1,521.95
—
$2,114.95
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,865.95
—
$2,126.95
Our Summit Racing™ LS CNC billet intake manifolds look great and are made to take whatever you can throw at them. They are capable of handling 2,000 horsepower and over 300 psi of boost! Their plenums and bolt-on runners are CNC machined billet aluminum and will not distort or warp under boost. These intakes can accept up to 102mm throttle bodies and include hardware, gaskets, and an -8 AN fuel rail kit.
Not Yet Reviewed
$2,399.99
Summit Racing™ tunnel ram and carburetor Pro Packs are made for horsepower, pure and simple. For folks with smaller cubic inch engines, we offer Weiand tunnel ram intakes with 450 cfm Holleys that'll deliver the horsepower you crave without saddling your rig with too much carb. For big-motor fans, we have the combo with 600 cfm Holleys. We include the linkage, too! Choose the cylinder head style application needed for your specific vehicle, and enjoy the enhanced performance of a Summit™ Pro Pack!
( 6 )
$1,636.84
—
$1,924.84
Summit Racing™ Turbocharger Hot Side combo kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. Each of our combos contain BTR multi-layer header gaskets, an ARP chromoly head bolt kit, and Precision Turbo and Engine turbocharger gaskets, along with a Summit Racing™ Pro LS turbo manifold and wastegate. Completing each combo will be one of our 2700 Series performance turbochargers or a VS Racing turbocharger. Choose the combo best suited to your power needs. Contents and features: * BTR LS multi-layer steel gasket * ARP chromoly head bolts--12-point, rated at 170,000 psi to handle severe conditions * Precision Turbo and Engine turbocharger gaskets—stainless steel, provides a positive leak-free seal in high-temperature situations * Summit Pro LS turbo manifold—universal, 304 cast stainless steel, T4 flange, designed to handle the heat and horsepower * Summit wastegate--stainless steel base and 6061 aluminum cap with black anodized finish * VS Racing turbochargers with T4 housing * Summit 2700 Series performance turbochargers--T4 turbine housings--true race turbos offering the latest in compressor aero technology with quick-spooling and free-flowing turbines specially designed, balanced, and precision assembled with 2618 billet forged compressor wheels for class leading racers.
( 2 )
$1,537.32
—
$2,133.31
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$1,890.62
Edelbrock Cross-Ram LS3 intake manifolds are ideal for anyone looking to combine great looks and outstanding performance between 1,500 - 7,000 rpm. The unique dual-plenum design features 13" long runners with flanges that will accept two, 90mm GM LS3 throttle bodies. The unique cross-ram dual-plenum design is ideal for twin turbo applications. When matched with high flowing air filters and inlet tubes, the dual-plenum system gives neck-snapping performance with plenty of options for engine builders and tuners. The manifolds are available in multiple finishes for that custom look.
( 2 )
$1,795.95
—
$1,995.95
Bolt a Corvette LT4 supercharger to LS3 or LSA square port heads with ICT Billet adapter kits. Allowing the use of standard LS port injection, these LT4 supercharger adapters bolt directly on to any LS rectangle port head (LS3, L99, LSA, L94, L76, L77, and many others) and include bracketry and fuel rails to utilize LS3 length injectors and an LS 4-bolt throttle body adapter. These LS3-style injection systems mount in the valley under the supercharger for a clean, sleek look and all aluminum parts are made from aerospace grade, USA produced, billet aluminum (except for the Holley fuel rails). Kit contents: * Two intake adapters * Fuel rail mounting bracket * -8 orb fuel rails * LS throttle body rotation adapter * LT4 2.5 in. supercharger pulley and hub * Billet Gen 4 LS valley pan with oil pressure sensor adapter * Seals and mounting hardware Notes: * When installing, the supercharger hub will press on until it sits in the inner race of the snout bearing * Compatible with ICT's LSA balancer and designed for dual belt setup: -- 8-rib supercharger belt plus separate 6-rib accessory belt in Corvette (-1) spacing
Not Yet Reviewed
$1,699.99
Pro-Filer Performance Products Hitman big block Chevy tunnel ram intake manifolds supply race winning performance out of the box. Available for 9.8 in. or 10.2 in. deck heights, each Hitman tunnel ram base is designed to take your power curve to higher levels without costly hand-porting. They are manufactured from aerospace-spec aluminum alloy (primary virgin ingot), and are truly revolutionary in that they are lighter in weight than most fabricated units, plus their solid cast design helps to reduce resonance, which affects high-rpm horsepower. The cast, pre-ported runners have been designed to eliminate airflow restriction and produce more power. Pro-Filer Hitman BBC tunnel ram intake bases also feature: * Accepts your choice of dual or single-carb top plates * Dimensional consistency far better than fabricated manifolds * Fits the majority of BBC spread port heads with 18, 14, and 12 degree valve angles * Cast bosses for injectors * Recommended for 565+ c.i.d. engines
Not Yet Reviewed
$1,618.45
LS Classic Series LT4 supercharger lids provide a slick vintage look for your modern supercharged LT4 engine. Featuring finned aluminum construction and machined highlights, they are offered in two finishes with or without the Corvette flag emblem. These GM LT-4 lids are direct replacements for factory lids, and can be installed in as little as 15 minutes. Enhance the look of your supercharger with an LS Classic Series LT4 supercharger lid. Select the finish you prefer.
Not Yet Reviewed
$1,999.95
—
$2,099.95
Our Summit Racing™ tunnel ram kits are made for horsepower, pure and simple. For you guys with smaller cubic inch engines, we have tunnel ram kits with 450 cfm carburetors; they'll give you the horsepower you crave, without saddling you with too much carb. For big motor fans, we have the kits with 600 cfm carburetors.
Not Yet Reviewed
$1,874.84
Performance Design's Carbon HR/pTR Hybrid intake manifolds use their Carbon HR upper combined with the nylon lower from the pTR for reduced height in constrained applications. Short velocity stacks are provided to clear the plenum which results in a total runner length of 6.5 in. These unassembled kits are offered in several cylinder head port configurations and available with a black or red flange. Select the color in the model designed for your engine. You will receive: * Carbon HR with black anodized billet aluminum sealing plate * pTR lower assembly to suit your application * Short velocity stack kit * Stainless steel hardware * Gaskets and seals Note: Long and medium velocity stacks will not fit in this application.
Not Yet Reviewed
$1,599.99
Standard Motor EGR coolers are designed to meet or exceed OE specifications, contributing to proper operation of the vehicle's emission system. The coolers are constructed with high-grade steel that's resistant to premature rust, ensuring product longevity during extreme vehicle operation. These OE replacements are available for a variety of applications—for correct fit and easy installation.
( 1 )
$1,686.99
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,549.95
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$1,622.95
—
$1,687.95
For the best fit and function, choose Mopar Replacement intake manifolds to replace old, cracked, and worn originals in your Chrysler, Dodge, or Jeep. Manufactured from quality materials, these Mopar parts offer an OE fit for an easier installation—and provide the right look, along with great performance, too! Select the Mopar part application designed for fitment on your vehicle.
( 17 )
$1,906.99
—
$2,202.99
An engine's cylinder heads and intake manifold must work together as an integrated system to produce maximum performance. The intake charge should make a seamless transition from the manifold runners to the cylinder head ports. Dart has optimized the port shape, the plenum volumes, and the runner angle for each application. These aluminum LS intake manifolds are offered in a variety of configurations, with raw, CNC, or injection ports. The single-plane units are designed for 4-barrel square bore carburetor mounting. Order the style preferred for your LS application.
Not Yet Reviewed
$1,541.68
—
$1,637.55
Standard Motor Products replacement exhaust gas recirculation valves help you get maximum fuel efficiency and power from your engine. Properly operating EGR valves are essential to helping your vehicle run flawlessly—the main emissions control components in the exhaust gas recirculation system. Reduce or eliminate the amount of smog-creating pollutants emitted during the combustion process with these reliable replacements from Standard Motor Products.
( 37 )
$1,959.99
Dorman EGR coolers are designed to prevent coolant leaks into your exhaust manifold and help protect your engine from extensive damage. They are manufactured from stainless steel specifically your diesel vehicle and quality-engineered to cool exhaust gas and recirculate it back to your engine. The tube design increases part longevity, helps to reduce soot collection and clogging, and prevents issues with radiator-style EGR coolers. All necessary O-rings, gaskets, and hardware are also included to help facilitate a complete repair job. Keep your big rig legal and performing its best with one of these EGR coolers by Dorman.
( 3 )
$1,952.99
—
$1,989.99
Wagner Tuning intake manifolds deliver greater flow and volume capacity to move your race vehicle past the competition. These intakes are CAD-designed and flow optimized from high-grade AlSi10Mg cast aluminum and then CNC-machined to Wagner's exacting specifications to create performance works of art. They are engineered for your vehicle to produce the ultimate in horsepower and torque--the perfect addition to your performance-enhanced car. Wagner Tuning intake manifolds also feature: * OEM fit and finish for ease of installation * Special surface treatment equal to the new TTRS intake * Some custom provisions may be needed (depending on the application) * Lower air temperature increased throttle response * Smaller size when installed allows for larger intercooler * Tuned intake pulse reduces throttle body valve flutter * Optimized airflow allowing for increased cylinder fill during intake cycle
Not Yet Reviewed
$1,790.00
Cummins by Mopar replacement EGR valves will restore proper control of the flow and recirculation of exhaust gasses. They are quality components providing OE fit and performance, as well as reliability and durability you expect and need. These valves are available for more than a hundred Dodge and Ram diesel applications from 2007 and up. Order the model recommended for your vehicle.
Not Yet Reviewed
$1,537.99
Performance Design Carbon pTR intake manifolds combine high-quality materials into a flexible and powerful tunnel ram architecture. PA6GF30 glass-reinforced nylon (lower) and 5-layer carbon fiber (upper) shells combine for lightweight, strong, and heat-resistant performance. Offering unique modular velocity stacks enabling 6 1/2 in. to 9 in. runners, multiple accessory port and sensor options along with other custom features, these high-performance manifolds offer easy configuring for a variety of hot rod builds, and can even be reversed on the engine. The plenums feature high-strength carbon fiber with high-temperature epoxy for improved strength-to-weight ratio and reduced heat soak to the fresh air charge. The polymer lower runner pack resists heat soak from the cylinder heads and hides all the ports/sensors in the valley. This combination of materials offers a 10 lbs. weight savings over competitive aluminum tunnel ram manifolds. These custom assemblies are designed for resto-mod, off-road race trucks, race boats, and hot rods where hood clearance is not an issue (they will not fit under late model vehicle hoods). Other product features and specifications include: * Modular velocity stacks for 6.5 in., 8.0 in., and 9.0 in. runner lengths * Raised velocity stack runner entries * Foam-core flange * Anodized billet 105mm forward-facing throttle body flange accepts 90-105mm throttle body * Two MAP sensor locations (front and back) * Two 1/4 in.-NPT ports for PCV, purge solenoid, etc. * One 1/2 in.-NPT port for brake booster or IAT * Tested to over 50 psi of boost * Nitrous nozzle bosses on outboard and valley side of each runner (16 total) * Includes stainless steel hardware for installation * Provisions to run 3 different injector body lengths * Includes molded port, plenum and throttle seals * Optional Carbon pTR ultralight billet -8 AN fuel rails (sold separately) * Optional medium or short velocity stacks (sold separately)
Not Yet Reviewed
$1,799.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
