Availability
Showing In Stock Items. Show All 21 Items.
Aeromotive Eliminator brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these True Variable Speed (TVS) units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The Eliminator in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,690.15
On Sale
FUELAB Titanium fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank * 1/4 in.-28 hardware to mount to most fuel cell nut rings (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,925.00
$1,732.50
On Sale
Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit
Not Yet Reviewed
$1,999.00
$1,699.15
Aeromotive 7.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum fwhp by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 4,800 fwhp on gas--naturally aspirated -- Up to 3,400 fwhp on gas--forced air induction -- Up to 3,360 fwhp on E85--naturally aspirated -- Up to 2,380 fwhp on E85--forced air induction -- Up to 1,680 fwhp on methanol--naturally aspirated -- Up to 1,190 fwhp on methanol--forced air induction * Carbureted -- Up to 5,400 fwhp on gas--naturally aspirated -- Up to 3,800 fwhp on gas--forced air induction -- Up to 3,780 fwhp on E85--naturally aspirated -- Up to 2,400 fwhp on E85--forced air induction -- Up to 1,890 fwhp on methanol--naturally aspirated -- Up to 1,200 fwhp on methanol--forced air induction
( 1 )
$2,152.75
Designed to feed serious EFI and carbureted engines gasoline (ethanol or methanol), Aeromotive 12 Series hex drive pumps allow you to run them on your camshaft or off the back of a properly prepared dry-sump oil pump. You could also mount the pumps off the engine or in the back of the vehicle, driven by a heavy-duty cable drive. Aeromotive Atomic hex drive fuel pumps can work in high or low-pressure applications. More product features include: * Flows up to 12 gpm * 5,000-plus hp on gas, up to 2,500 hp with methanol * High-efficiency, gerotor pumping mechanism * Tough Type III hard coat anodized body * CNC-machined from 6061 T6 aircraft aluminum * Hex drive collar with 3-bolt Enderle bolt pattern * Standard male 3/8 in. hex driveshaft * 1.25 in. barb and AN-16 male inlet * ORB-12 female outlet port
Not Yet Reviewed
$1,640.30
Aeromotive 5.0 GPM brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 5.0 GPM in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$2,086.45
—
$2,186.15
Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,863.60
—
$2,058.30
Aeromotive offers various brushless 3.5 gpm gear pump fuel cells, featuring the pump and a 100-micron stainless steel prefilter which can be mounted anywhere in any vehicle. Simply strap the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
Not Yet Reviewed
$1,929.40
Aeromotive Pro-Series 3.5 gpm brushless gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 3.5 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals—while offering low-amp draw, excellent heat dissipation, and high-pressure capabilities. Lots of power needs lots of fuel; Aeromotive 3.5 gpm brushless gear pumps will feed your hungry high performance machine. Choose the body style you prefer.
Not Yet Reviewed
$1,573.45
Capable of supporting 350 to 2,500 hp, Aeromotive fuel pumps are made just for serious racers. They flow 2,700 lbs./hr. of fuel, deliver 2 to 200 psi worth of fuel pressure, and work with any type of fuel. That's enough fuel flow and pressure to support a 6-second drag car—fuel injected, blown, turbocharged, or otherwise! Their belt-driven design means there's no current draw, and the pumps require no priming. They have a billet aluminum housing and bracket, a -10 AN O-ring port, and an anodized finish. The pumps are available in universal and application-specific models.
( 2 )
$1,640.30
Delphi fuel injection pumps feed your gas or diesel engine. Precisely delivered fuel keeps your engine running smoothly and provides the right amount of fuel to gain power. These Delphi pumps are built from quality materials and are validated by Delphi to ensure the best performance in your rig. Give your cylinders equal shots of fuel for better performance with Delphi fuel injection pumps.
Not Yet Reviewed
$1,669.99
—
$2,011.99
Specializing in high performance EFI fuel system solutions, DeatschWerks X3 Series fuel pump modules for the Ford F-150 are built and packaged with components that work together to deliver the flow you need and the OE functionality you want. Each module includes accommodation for three pumps, integration of a return fuel line, and retention of all functionalities of an OE module. The DW X3 modules consist of a top-hat, center section, installation kit, and bucket. DeatschWerks X3 Series fuel pump modules are available with no pumps, triple DW400 pumps, or as a complete package with module, pumps, and PTFE plumbing kit. Choose the DW X3 desired for your F-150. X3 module features: * OEM tank fitment * Anodized aluminum construction * Retains all OEM sensor, capacity, and surge features * 310 percent increase over OEM F-150 pump module * Supports over 1,900 whp on pump gas forced induction * Fits up to three DW100, 200, 300, 400 or 420 fuel pumps
Not Yet Reviewed
$2,199.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
