Availability
On Sale
FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.
( 3 )
$2,064.00
$1,857.60
On Sale
FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features
( 41 )
$1,997.99
—
$2,283.99
$1,598.39
—
$1,827.19
On Sale
FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket
( 1 )
$2,375.99
$1,900.79
On Sale
FiTech Go EFI 2x4 Power Adder 1200 hp fuel injection systems are for the guys who have 671 and 871 roots superchargers or make up to 1200 hp naturally aspirated on their dual-quad setup. These easy self-tuning systems work out of the box on your 2x4 blower plate as an inline setup or can be side mounted using custom linkages. Also, the kits are a bolt-on for the most popular normally aspirated dual-quad and tunnel ram manifolds, including the Edelbrock line of dual-quad manifolds, without any adapters! They fit and look like they belong there because they were designed to fit from the start. One throttle body handles all of the brains, while the second holds four additional injectors. These can also be used in cross ram and tunnel ram configurations. Application notes: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, etc. engines making 250 hp up to 1200 hp with a dual quad intake manifold. Replacement for any dual-quad carburetors for engines with 250 hp up to 1200 hp. Use the same size air cleaner you would normally use for your dual-quad carburetors. Product features: * 2.5 BAR internal MAP sensor * Suitable for up to 1200 hp * (8) Flow matched injectors * (2) Fan control * Blower and turbo ready * Support for nitrous * Boost and nitrous timing * Ignition timing control * Built-in pressure regulator * Air/fuel ratio tuning * Pro-tuning laptop software * Bright aluminum or matte black finish * NOTE: Some models include Go Spark CDI box Kit contents: (2) Diecast throttle body (1) Oxygen bung kit (1) Hand-held controller (1) CTS sensor (1) Hand-held controller cable (1) CTS adapter (1) Windshield mount (1) Mini USB cable (1) 4+2-Pin Connector (2) Return plug (1) Oxygen sensor (1) Gasket kit
( 11 )
$2,236.00
—
$2,347.99
$1,900.60
—
$1,995.79
On Sale
LS motors have a great base for power, but what they really need is something wicked to wake them up. FiTech LS EFI 750 HP fuel injection systems have alarming power, exciting style, and will take you and your vehicle to the edge. FiTech fabricated many aluminum parts for these systems, including the low-profile 102mm billet throttle body, high-volume billet fuel rails, and an intake manifold with a 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mate the 55 lbs./hr. injectors, plug-and-play wiring harness, and color touch screen self-learning ECU. This allows you to program two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on-the-fly. A suction cup mounting bracket puts the controller at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. Awaken the beast and feed its needs with an ultra-performing FiTech LS EFI 750 HP fuel injection system with transmission controller. Additional features: * Programmable touch screen hand-held controller with data log features * 3-bar MAP sensor automatically detects up to 30 psi boost * AN fittings and fuel crossover * 24X and 58X crank and cam-compatible and works with custom cams * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Dual Bosch wideband with dual trim controlled * Knock sensor control * Stainless oxygen sensor bung * Compatible with car and truck coils * Designed for applications making at least 6 inches of vacuum at idle
( 20 )
$2,410.00
$1,928.00
On Sale
FiTech Go EFI 2x4 625 hp fuel injection systems will let everyone know you mean business with a pair or 4-barrels crowned atop your engine. Each system is supplied with two throttle bodies, one with the brains and integral ECU and the other with the brawn. Both feature four injectors and will support up to 625 hp (naturally aspirated). Thanks to a multi-bolt pattern, the 2x4 system will bolt onto most intakes, including tunnel rams or cross rams. Through the advanced tuning capabilities of the efficient ECU, you'll have your engine revved up, idling smooth, and making big power in no time. FiTech Go EFI 2x4 625 hp fuel injection systems are available with a bright aluminum or matte black finish, with or without FiTech's Go-Spark CD ignition to deliver high powered sparks, improving combustion and power output of your engine. Each FiTech Go EFI 2x4 is supplied with two throttle bodies, handheld touch screen controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. Choose your preferred setup and finish.
( 10 )
$1,916.00
—
$2,030.99
$1,628.60
—
$1,726.34
On Sale
FiTech Go EFI 3x2 Tri Power 600 hp fuel injection systems with external ECU sticks to basic functions that deliver the best possible performance and economy for your street and mild performance engine. These FiTech ready-to-run throttle body systems allow you to remove your carburetor and advance into the EFI world at an affordable price. The Tri-Power 600 hp systems come complete with a classic gold diecast aluminum throttle body, hand-held controller, windshield mount, wideband oxygen sensor, coolant temperature sensor, and a compact external ECU. Systems are available with or without FiTech's Go-Spark CD ignition. Features: * Annular discharge * Supports up to 600 hp engines * Three high-flow throttle bodies, each with two 45mm throttle bores * Clearly marked OE-style harness * All sensors are integrated on the unit (except for wideband oxygen and coolant temperature sensors) * Fits intake manifolds with three 2-barrel flanges * Works with OE carb-type distributor and throttle linkage * Compatible with E-85 gasoline * Fuel pump voltage control * Wet Flow Technology with swirl spray annular discharge design * Optimize Air Fuel Ratios while driving
( 3 )
$2,410.00
$1,928.00
On Sale
FiTech Retro LS EFI 650 hp fuel injection systems offer a "golden" opportunity for impressive looks and performance. These classic gold engine-toppers with transmission control are complete throttle body kits, suitable for everything from your junkyard 5.3 to a Stroker 427—and they deliver old-school carburetor looks with EFI technology and reliability. Whether a do-it-yourself hot rodder or professional EFI tuner, the features of the FiTech Retro LS EFI 600 hp system are sure to inspire you. FitTech Retro LS complete self-tuning induction kits include: * Classic gold die-cast throttle body * Hand-held controller * Windshield mount * Wideband oxygen sensor * Coolant temperature sensor * Self-learning ECU Features and benefits: * Wet flow technology and swirl spray annular discharge for complete atomization * Windshield-mount for control * Flow-matched 80 lb. injectors * Self-learning ECU with touchscreen controller for easy setup and configuration * Semi-sequential fuel and full spark control * Bosch wideband controlled (self-learning) * 24X and 58X crank and cam compatible * 1 BAR MAP sensor—TPS-IAC sensor * Speedometer Output Driver for most speedometers * On-the-fly programmable target air/fuel ratios and timing * Custom camshaft-friendly * Knock sensor control * Available transmission control feature is suitable for 4L60, 4L65, or 4L80 GM transmissions * Compatible with E-85 and gasoline * All Go-EFI's feature voltage control fuel pump control. This feature reduces the voltage to the pump under low-load conditions such as idle and cruise, thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing.
( 1 )
$1,834.00
$1,650.60
On Sale
FiTech Ultimate Rebel LS 500 hp EFI fuel injection systems are available with or without a transmission control. These cutting-edge fuel injection solutions combine high performance with a sleek and refined design. Building upon the success of the renowned FiTech Ultimate LS EFI system, the Rebel LS takes innovation a step further with its distinctive cleaner profile and enhanced features, making it the ultimate choice for modern engine conversions. Designed for enthusiasts seeking both power and aesthetics, the Ultimate Rebel LS EFI system redefines the look and performance of your LS-powered vehicle. The standout feature of the Rebel LS system is its sleek and streamlined appearance, which seamlessly integrates with the engine bay, providing a cleaner and more polished aesthetic. The redesigned fuel rail bracket adds to the visual appeal, offering a fresh and modern touch that complements any engine setup. Beneath its striking exterior, the Ultimate Rebel LS EFI system boasts the same advanced technology that FiTech is known for. Experience exceptional fuel delivery and engine control, optimizing your vehicle's performance and efficiency. These systems are tailored to LS engine conversions, ensuring a hassle-free installation process while delivering consistent and reliable results. Key features include: * Cleaner profile: The Ultimate Rebel LS EFI system is engineered with a refined design that seamlessly integrates into your engine bay, elevating the visual appeal of your vehicle * Thicker gauge manifold provides quieter injection * Redesigned fuel rail bracket: The innovative fuel rail bracket design not only enhances the appearance but also adds a touch of sophistication to your engine compartment * Advanced fuel injection technology: Benefit from FiTech's cutting-edge fuel injection technology, ensuring precise fuel delivery and optimized engine performance * Effortless installation: Designed specifically for LS engine conversions, the Rebel LS system offers a user-friendly installation process that minimizes downtime * Optimized performance: Unlock the full potential of your LS-powered vehicle with improved throttle response, increased horsepower, and better fuel efficiency * The most complete kit on the market; includes manifold, ECU, sensors, throttle body, harness, fuel rails, fuel pressure regulator, throttle cable brackets, and more * Boost/Nitrous compatibility: Equipped with 3 Bar MAP sensor (27 psi) * E85 compatible Kit contents: (1) Rebel LS1, LS2, LS6 low-profile intake manifold with MAP and IAT port (1) Ultimate LS 92mm throttle body with sensors (8) 36 LB injectors (1) LS ECU (1) LS1 fuel rail kit (1) Primary LS harness (2) EV1 injector sub harness (1) Oxygen sensor extension sub harness (1) 3 Bar MAP sensor (1) IAT sensor (1) LS1/LS2 knock sensor harness (1) Go EFI clamp-on oxygen sensor bung kit (1) Handheld monitor for ultimate LS (1) FiTech hand-held cable (1) FiTech USB to USB C cable (2) FiTech oxygen sensors (1) Premium magnetic handheld mount (1) Rebel intake throttle cable bracket with round hole (1) Rebel intake throttle cable bracket with stock GM cable notch (1) Go Fuel tight fit regulator with pressure gauge
Not Yet Reviewed
$1,900.00
—
$2,390.00
$1,520.00
—
$1,912.00
On Sale
FiTech Go EFI 2x4 625 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are offered in two finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 hp (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. * Fuel cell pump modules are offered in two models—single or dual pump. Each style features a billet machined top assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 4 )
$2,042.99
—
$2,112.99
$1,736.54
—
$1,796.04
On Sale
FiTech Ultimate Rebel LS 1,000 hp EFI fuel injection systems are available with or without a transmission control. These cutting-edge fuel injection solutions combine high performance with a sleek and refined design. Building upon the success of the renowned FiTech Ultimate LS EFI system, the Rebel LS takes innovation a step further with its distinctive cleaner profile and enhanced features, making it the ultimate choice for modern engine conversions. Designed for enthusiasts seeking both power and aesthetics, the Ultimate Rebel LS EFI system redefines the look and performance of your LS-powered vehicle. The standout feature of the Rebel LS system is its sleek and streamlined appearance, which seamlessly integrates with the engine bay, providing a cleaner and more polished aesthetic. The redesigned fuel rail bracket adds to the visual appeal, offering a fresh and modern touch that complements any engine setup. Beneath its striking exterior, the Ultimate Rebel LS EFI system boasts the same advanced technology that FiTech is known for. Experience exceptional fuel delivery and engine control, optimizing your vehicle's performance and efficiency. These systems are tailored to LS engine conversions, ensuring a hassle-free installation process while delivering consistent and reliable results. Key features include: * Cleaner profile: The Ultimate Rebel LS EFI system is engineered with a refined design that seamlessly integrates into your engine bay, elevating the visual appeal of your vehicle * Thicker gauge manifold provides quieter injection * Redesigned fuel rail bracket: The innovative fuel rail bracket design not only enhances the appearance but also adds a touch of sophistication to your engine compartment * Advanced fuel injection technology: Benefit from FiTech's cutting-edge fuel injection technology, ensuring precise fuel delivery and optimized engine performance * Effortless installation: Designed specifically for LS engine conversions, the Rebel LS system offers a user-friendly installation process that minimizes downtime * Optimized performance: Unlock the full potential of your LS-powered vehicle with improved throttle response, increased horsepower, and better fuel efficiency * The most complete kit on the market; includes manifold, ECU, sensors, throttle body, harness, fuel rails, fuel pressure regulator, throttle cable brackets, and more * Boost/Nitrous compatibility: Equipped with 3 Bar MAP sensor (27 psi) * E85 compatible Kit contents: (1) Rebel LS1, LS2, LS6 low-profile intake manifold with MAP and IAT port (1) Ultimate LS 102mm throttle body with sensors (8) 36 LB injectors (1) LS ECU (1) LS1 fuel rail kit (1) Primary LS harness (2) EV1 injector sub harness (1) Oxygen sensor extension sub harness (1) 3 Bar MAP sensor (1) IAT sensor (1) LS1/LS2 knock sensor harness (1) Go EFI clamp-on oxygen sensor bung kit (1) Handheld monitor for ultimate LS (1) FiTech handheld cable (1) FiTech USB to USB C cable (2) FiTech oxygen sensors (1) Premium magnetic handheld mount (1) Rebel intake throttle cable bracket with round hole (1) Rebel intake throttle cable bracket with stock GM cable notch (1) Go Fuel tight fit regulator with pressure gauge
Not Yet Reviewed
$2,190.00
—
$2,490.00
$1,752.00
—
$1,992.00
On Sale
FiTech Ultra Ram EFI systems deliver outstanding port fuel injection performance with an aggressive looking sheet metal intake manifold. The design of the Ultra Ram intake performs as good as it looks and will support up to 800 hp (naturally aspirated). FiTech Ultra Ram EFI 800 hp self-tuning fuel injection systems come ready to go out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets with self-learning technology, so no laptop is required. In fact, you only need to input a few engine specs into the color touch screen monitor to get the engine to fire up. Ultra Ram systems are ideal for crate motors or your custom-built engine. Features: * Chevy Big Block rec port * Self-learning * Timing control ready * Matte black finish * Eight flow-matched injectors * Works with HEI large cap distributor Supplied with: * Sheet metal intake * Cast aluminum 102mm throttle body * Remote mount ECU * Main harness * Handheld controller * Cable and windshield mount * Wideband oxygen sensor * Bung kit * Coolant sensor * Gasket * Mini USB cable * Instructions and warranty information
( 2 )
$2,125.00
$1,806.25
On Sale
FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems with Hy-Fuel tight-fit modules are for enthusiasts that demand more from their system, or who are planning a future upgrade! This system is capable of 25 lbs. of boost right out of the box; it can be used in a blow-through turbo or blower application, or on a single roots-style supercharger. Also, you can run a single stage of wet nitrous and control air/fuel, as well as ignition timing. Each Hy-Fuel tight-fit in-tank retrofit kit is a sleek miniature assembly designed to allow you to fit a high-volume fuel system into almost any tank. This application is perfect for both original and aftermarket fuel tanks, as well as fuel cells with limited space. It can also be used with a Tanks, Inc. EFI tank. Additional features of the Go EFI 4 600 hp Power Adder system: * Boost-ready throttle body * Boost-ready ECU 2.5 Bar MAP sensor good for 21.7 psi * Nitrous control with safety features and accessories for tuning * Nitrous and Boost specific target air/fuel target options * Boost and Nitrous timing retard strategies * Two-fan control (can be set at separate temperatures) * Air-conditioning idle speed input kick up * Advanced hand-held tuning mode enabled * Pro Laptop software You also get standard features included in this Go EFI system: * Four Hi-Flow 600 hp injectors * Initial setup is quick and easy (simple touchscreen selections) * Self-tuning (after startup ECU immediately takes over and provides your vehicle with an optimum tune) * Basic install can be done with just four wires and two sensors * ECU is mounted on the throttle body (no external boxes or harnesses to clutter up engine compartment or under dash) * Uses a Bosch 4.2 wideband oxygen sensor * Throttle linkage suits most transmissions * Go EFI systems feature wet-flow technology and have a unique Swirl Spray Annular discharge design for complete atomization * Built-in pressure regulator * Can change air/fuel ratios and ignition timing on the fly * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Plus, many more features
Not Yet Reviewed
$1,956.99
$1,761.29
On Sale
FiTech Go EFI 2x4 625 hp system Force Fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their 2x4 TBIs with one of their Force Fuel kits that allows you to keep the stock pump to feed the Force Fuel reservoir, while its internal pump provides high pressure to the EFI system. The throttle bodies are offered in matte black or bright aluminum finishes. Choose the master kit with your preferred finish and Force fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 hp (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Fuel delivery options: * Go Fuel Force Fuel supports the fuel demands of an 800 hp engine on gas using an internal 340 lph pump. The reservoir holds a .5 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance. Force Fuel kit is supplied with 5 ft. of high-pressure fuel hose, 10-micron fuel filter, AN fittings, return line fitting bung, and a liquid filled gauge. * Go Fuel Mini Force Fuel supports fuel demands up to 600 hp. These smaller versions are ideal for cramped engine compartments, can be installed in four positions, and feature a reservoir with an efficient 255 lph pump with an internal regulator delivering a consistent 58 psi for your EFI system. The Mini is supplied with a high-pressure fuel hose, AN fittings, return line fitting bung, and a liquid filled gauge.
Not Yet Reviewed
$2,213.99
—
$2,275.99
$1,881.89
—
$1,934.59
On Sale
FiTech Retro LS TBI 650 hp system inline pump/regulator fuel injection master kits deliver old school looks and modern EFI performance for your hot rod. These kits feature a FiTech classic carburetor-gold throttle body with transmission control and a pre-terminated wiring harness with specific LS engine sensors, including the factory knock sensors to complement the built-in timing control. The remote ECU can control the transmission shift points and characteristics of the popular 4L60/65/80E transmissions. No laptop is required, and the system will work on 24x or 58x cam sensors. Also supplied with the Retro LS TBI is a handheld touch screen controller, cable and windshield mount, WBO2 sensor, bung kit, gaskets, mini USB cable, instructions, and warranty info. For fuel delivery, these FiTech Retro LS master kits pair the TBI an in-line pump kit and Tight Fit regulator with gauge. The inline kit is supplied with a heavy-duty 255 lph external pump suitable for engine producing up to 600 hp, 40 ft. of high-pressure fuel hose, two fuel filters, fittings, mounts, and clamps. The Go Fuel Tight Fit regulator allows you to set the fuel pressure precisely where your EFI system and engine require. It can be adjusted from 30 to 70 psi and will support up to 1,000 hp. It is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port.
Not Yet Reviewed
$2,166.99
$1,950.29
On Sale
FiTech Ultimate Rebel LS 750 hp EFI fuel injection systems are available with or without a transmission control. These cutting-edge fuel injection solutions combine high performance with a sleek and refined design. Building upon the success of the renowned FiTech Ultimate LS EFI system, the Rebel LS takes innovation a step further with its distinctive cleaner profile and enhanced features, making it the ultimate choice for modern engine conversions. Designed for enthusiasts seeking both power and aesthetics, the Ultimate Rebel LS EFI system redefines the look and performance of your LS-powered vehicle. The standout feature of the Rebel LS system is its sleek and streamlined appearance, which seamlessly integrates with the engine bay, providing a cleaner and more polished aesthetic. The redesigned fuel rail bracket adds to the visual appeal, offering a fresh and modern touch that complements any engine setup. Beneath its striking exterior, the Ultimate Rebel LS EFI system boasts the same advanced technology that FiTech is known for. Experience exceptional fuel delivery and engine control, optimizing your vehicle's performance and efficiency. These systems are tailored to LS engine conversions, ensuring a hassle-free installation process while delivering consistent and reliable results. Key features include: * Cleaner profile: The Ultimate Rebel LS EFI system is engineered with a refined design that seamlessly integrates into your engine bay, elevating the visual appeal of your vehicle * Thicker gauge manifold provides quieter injection * Redesigned fuel rail bracket: The innovative fuel rail bracket design not only enhances the appearance but also adds a touch of sophistication to your engine compartment * Advanced fuel injection technology: Benefit from FiTech's cutting-edge fuel injection technology, ensuring precise fuel delivery and optimized engine performance * Effortless installation: Designed specifically for LS engine conversions, the Rebel LS system offers a user-friendly installation process that minimizes downtime * Optimized performance: Unlock the full potential of your LS-powered vehicle with improved throttle response, increased horsepower, and better fuel efficiency * The most complete kit on the market; includes manifold, ECU, sensors, throttle body, harness, fuel rails, fuel pressure regulator, throttle cable brackets, and more * Boost/Nitrous compatibility: Equipped with 3 Bar MAP sensor (27 psi) * E85 compatible Kit contents: (1) Rebel LS1, LS2, LS6 low-profile intake manifold with MAP and IAT port (1) Ultimate LS 102mm throttle body with sensors (8) 36 LB injectors (1) LS ECU (1) LS1 fuel rail kit (1) Primary LS harness (2) EV1 injector sub harness (1) Oxygen sensor extension sub harness (1) 3 Bar MAP sensor (1) IAT sensor (1) LS1/LS2 knock sensor harness (1) Go EFI clamp-on oxygen sensor bung kit (1) Handheld monitor for ultimate LS (1) FiTech handheld cable (1) FiTech USB to USB C cable (2) FiTech oxygen sensors (1) Premium magnetic hand-held mount (1) Rebel intake throttle cable bracket with round hole (1) Rebel intake throttle cable bracket with stock GM cable notch (1) Go Fuel tight fit regulator with pressure gauge
Not Yet Reviewed
$2,190.00
—
$2,490.00
$1,752.00
—
$1,992.00
On Sale
FiTech offers Go EFI 8 1200 hp fuel injection systems with dual pump Force Fuel delivery master kit. Some models also include Go Spark CDI box. These units have a matte black finish. Go EFI systems are perfect for your everyday driver, right up to your weekend street machine or bracket racer. They feature the fastest, most accurate self-learning available, timing control, wet flow annular discharge, and tons of additional features. Go EFI systems fit any 4-bbl intake manifold (including 4500 flange) and are the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine! They are also the only computer-mounted throttle bodies that offer spark control without the need for an external spark box or special distributor. Other features include a built-in fuel pressure regulator and hand-held controller with touch screen for quick and easy initial set-up.
( 1 )
$2,036.99
—
$2,247.99
$1,731.44
—
$1,910.79
On Sale
FiTech MeanStreet EFI 800 hp fuel injection systems with Force Fuel systems deliver a whole lot of horsepower in small packages. MeanStreet offers an onboard ECU and fuel pressure regulator to bring you simple, clean wiring with an easy install for up to 800 hp. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. FiTech Meanstreet 800 hp and Force Fuel system combos provide your performance engine with a self-tuning setup and the power to dominate! Includes: * FiTech Meanstreet EFI 800 hp self-tuning fuel injection systems * FiTech Force Fuel systems
( 2 )
$1,778.99
—
$1,842.99
$1,512.14
—
$1,566.54
On Sale
FiTech Go EFI 2x4 625 hp system/Go-Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. And going a step further, the Go-Spark CDI ignition will elevate the spark for even more improved performance. Choose the master kit with your preferred fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 horsepower (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. The throttle bodies are available in two finishes. Go-Spark produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel universal in-tank pump modules—255 or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (non-aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$2,252.99
—
$2,424.99
$1,915.04
—
$2,061.24
On Sale
FiTech Go Port EFI standalone system Force Fuel/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier and an upgrade to high-powered sparks for improved combustion and power output. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. FiTech Go Fuel Force Fuel system supports the demands of an 800 hp engine on gas. It is easy to mount, and a serviceable 10-micron fuel filter is supplied to ensure clean fuel reaches the injectors. The reservoir holds a 1/2 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance, and the Force Fuel system also includes 5 ft. of high-pressure fuel hose, fittings, return line fitting bung, and a liquid-filled gauge. Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire nonmagnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$1,981.99
$1,783.79
On Sale
When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Force/Go-Spark fuel injection master kits pair two powerful components designed to support serious horsepower, plus an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel Dual Force fuel system supports up to 1,600 hp. The dual-pump system works in concert with a mechanical or electric fuel pump to supply the Force Fuel reservoir with fuel where it is then fed through two internal 340 lph pumps to feed the EFI system. Dual internal regulators keep the pressure at 58 psi which is ideal for reliable EFI performance. The assembly holds a 1/2 gallon of fuel to submerge the efficient pumps with no chance of fuel starvation. A strong, versatile mounting bracket is included for easy mounting under the hood. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.
Not Yet Reviewed
$2,247.99
$1,910.79
On Sale
FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems with Force Fuel systems are a unique combination of a boost-ready throttle body and fuel injection upgrade convenience. The Power Adder systems allow you to ditch that old carburetor and keep your supercharger, blower, or nitrous setup. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. Blow away all the competition when you order the FiTech Easy Street 600 hp and Force Fuel systems combo designed to fit your boosted performance engine application. Includes: * FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems * FiTech Force Fuel systems
Not Yet Reviewed
$1,817.99
—
$1,879.99
$1,545.29
—
$1,597.99
On Sale
When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Pump/HP regulator/Go-Spark fuel injection master kits pair powerful components designed to support serious horsepower, plus precise fuel pressure and an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel dual fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go Fuel High Horsepower regulator will support 2,000 hp. Adjustable from 30 to 70 psi, this larger, dual output model is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port. It will accept a gauge. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.
Not Yet Reviewed
$2,395.99
$2,036.59
On Sale
FiTech Go EFI 4 600 hp self-tuning fuel injection systems with Hy-Fuel in-tank retrofit modules are perfect for your everyday driver, weekend street machine, or bracket racer. They feature the fastest, most accurate self-learning available, timing control, wet flow annular discharge, and tons of additional features. These systems mount the self-adjusting ECU on the throttle body, will fit any 4-barrel manifold, and are designed to support 250 to 600 hp engines. Go EFI 4 kits include a hand-held controller with touchscreen for initial setup; throttle linkage that suits most transmissions; and parts are manufactured with OE engineering. FiTech Hy-Fuel tight-fit in-tank retrofit kits are sleek miniature assemblies that allow you to fit a high-volume fuel system into almost any tank, making them ideal for both original and aftermarket fuel tank applications. Additional features include: * Four Hi-Flow 600 hp injectors * Self-tuning ECU immediately takes over after startup * Basic install can be done with just four wires and two sensors * Ignition timing can be controlled and adjusted (via touchscreen) * Uses a Bosch 4.2 wideband oxygen sensor * Systems with mounted ECUs offer spark control without the need of an external spark box or special distributor * Air/fuel ratios can be optimized on-the-fly as you drive * Includes adjustable fan switch * Single 255 lph fuel pump for engines up to 600 hp * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Will work with CDI box, but not required to control timing * And many more features
( 1 )
$1,986.99
$1,788.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
