Availability
Trans-Dapt Performance Swap-In-A-Box complete engine swap kits feature everything you need to transplant that new engine into your ride. They include a set of application-specific headers (painted or ceramic coated), motor and transmission mounts, and some kits contain oil filtration components. By matching up these parts by vehicle, Trans-Dapt ensures a swap with minimal modifications needed for installation. Give your ride a heart transplant using one of these turnkey Swap-In-A-Box complete engine swap kits!
( 55 )
$1,131.99
—
$1,692.99
So you're ready to swap in a super lightweight engine that will require no maintenance, yet cranks out unbelievable horsepower and torque—giving you a truck you can hop in, turn the key, and go! Now, Classic Performance offers engine install kits to upgrade and finish off your conversion with ease. These CPP kits will work on most all LS engines. Order the model recommended for your vehicle and engine application. Classic Performance engine install kits include: * Engine mount perches * Engine mount adapters * Engine pads * Full-length ceramic coated headers * Transmission crossmember * Mounting hardware
Not Yet Reviewed
$1,344.99
—
$1,413.99
On Sale
Doug's Headers offers LS Swap exhaust systems for a wide range of vehicles, including many Chevy, Buick, Oldsmobile, Pontiac, and GMC models from the 1960s and '70s. They feature mandrel-bent 304 stainless steel for maximum flow and long-lasting durability. Each system contains a stainless muffler and H-pipe or X-pipe design for a true muscle car sound. These exhausts tuck up tight with the Doug's transmission crossmember for maximum ground clearance. All brackets and hardware are included for a true bolt-on installation; and the exhausts are compatible with Doug's LS Swap headers. Order the system recommended for fitment on your vehicle.
( 1 )
$1,195.20
—
$1,209.00
$1,075.68
—
$1,088.10
AFCO Racing LS swap direct-fit radiators are built with the correct inlet and outlet required for the engine swap. They are 100 percent TIG-welded, 100 percent pressure tested and use no epoxy or sealers. These double pass radiators were designed for the rigors of racing, but AFCO added the mounts to allow their superior design on the street. After all, there are more important things to be doing than installing your radiator—like enjoying your truck the way it was intentionally built for—to be driven! AFCO Racing LS swap direct-fit radiators feature: * All aluminum construction * Billet filler neck offers strength and higher quality appearance over stamped * Uses the same tools to install your new radiator as you did to remove the old one * Factory fan shroud provisions on many models * Available with optional fan and shroud assemblies * TIG-welded by skilled craftsmen * Properly positioned inlets and outlets for ease of flow * Drain plugs included
( 3 )
$1,044.99
—
$1,494.99
On Sale
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$1,299.95
$1,025.95
—
$1,349.95
Whether you are completing a restoration or want a new look, Classic Instruments 1962-72 Chevy truck package gauge sets are designed to fit your vintage rig. Go with a modern look or stay with a retro theme--whatever you want your dash to look like. These direct-fit dials come with the wiring harnesses and hardware to get everything working. Available in various colors and styles, select the gauge set for your project truck. Features: * Electronic quartz clock * Fuel gauge * Water temperature gauge * Oil gauge * Volts gauge
( 9 )
$1,199.95
—
$1,449.95
Classic Instruments BelEra Package gauge sets deliver 21st century accuracy for your 20th century American classic! BelEra Packages complement the classic lines of your 1955 or 1956 Chevrolet. Available in black, gray, tan, and white, these gauge clusters have a textured-face finish with a smooth gauge sweep area and fit into your stock or aftermarket bezel perfectly. Gauges featured include an electronic 140 mph speedometer, 8,000 rpm tach, oil, volt, temperature, and fuel gauges, plus high-beam and turn signal lights. Fit your Chevy with modern accuracy and precision, along with an elegant design, when you install BelEra Package gauge sets from Classic Instruments.
( 1 )
$1,099.95
Classic Instruments 1963-67 Corvette package gauge sets will give your vintage interior that special "wow." Handcrafted in America, these packaged clusters include a speedometer, tachometer, and four individual gauges. So, whether you prefer the nostalgic appeal of their All American Series, the hot look of their Classic White, or the standout racy look of their Red Steelie gauges, Classic Instruments will dress your Corvette beautifully with a precision 1963-67 package gauge set.
( 1 )
$1,499.95
—
$1,599.95
Sikky Manufacturing LS swap radiators are the end-all solutions for your cooling system with an LS swap. These bolt-in units simplify the chore of getting a properly sized radiator into a tight engine compartment. Sikky starts with a custom core and designs end tanks and mounting points to fit like stock. The 2.25 in. dual pass radiators are sure to keep up with the cooling demands of your engine for both street and track use. Sikky positioned the inlet and outlet of each radiator in a way to work seamlessly with any LS-based engine water pump inlet and outlet. They also incorporated a fan shroud that allowed the mounting of high flowing SPAL fans while keeping a very low profile for maximum clearance with the engine pulleys. Sikky Manufacturing LS swap radiators deliver maximum cooling capacity and perfect fitment to make your life easy, keeping your LS-powered vehicle cool. Choose the one designed for your vehicle. Additional features: * 6061 billet aluminum mounting points * Utilizes factory mounting locations * No fabrication required
Not Yet Reviewed
$1,329.99
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,210.95
—
$1,222.95
Be Cool dual electric fan wiring kits are designed to wire a dual fan to your vehicle. They include a 50 amp waterproof-style relay, a fusible link, a wiring harness, wire connectors, and a detailed instruction sheet. If you need to control the fan manually, the required switch is sold separately.
( 9 )
$1,399.99
On Sale
Clearance
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,700.00
$1,035.00
—
$1,530.00
Sikky Manufacturing LSX swap headers allow perfect drop-in fitment. Designed around using the Sikky mount kits and components, these headers are available for several applications in mild steel, ceramic coated mild steel, or with stainless steel primaries and collectors. (See product Notes and Applications for specific model fitment details.) Features include: * V-band flange pre-installed—clamp and other half included—(not all models) * Includes new gaskets and bolts * May have one oxygen sensor bung installed per header (not all models) Ceramic coating process includes: * Parts are thermal degreased at 750 degrees for 3 hours to remove any impurities and contaminates—the most effective way to clean parts * After thermal, they go through a series of blasting on all surfaces * Once a surface profile is created, they are hand-sprayed with aluminum ceramic coating * After parts are covered, they're put in the oven and cured at 750 degrees for 2 1/2 hours * When curing is complete, they are polished to a high luster in a vibratory polisher using special ceramic beads, along with special soap and water * After polishing, they receive a wipe down and inspection before going to shipping * 3-year warranty on coatings for corrosion
Not Yet Reviewed
$1,170.39
—
$1,383.19
Summit Racing's Pro LS transmission adapters enable you to swap to more common and inexpensive manual transmissions from other vehicles. In addition to the bellhousing adapter, they often include handy items like the billet steel flywheel, fasteners, pilot adapter, and starter mounts. These adapters allow the use of the high performance clutches commonly used with the transmission. The kits are available for 5-speed or 6-speed applications.
( 1 )
$1,227.99
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,299.99
—
$1,499.99
Helix's coilover conversion kits are a precision balance of ride comfort and maximum road adhesion. You will immediately feel the difference with Helix coilovers with reduced body roll in corners, nose drive and squat when accelerating. The Helix springs are manufactured from the highest quality spring steel available. Helix uses state-of-the-art equipment using the latest technology producing what they call the best spring available anywhere. So if you're ready to improve the performance and ride comfort of your vehicle, you can do it with Helix's entire coilover spring setups without compromising consistency and durability. Order the coilover kit for your application needs.
Not Yet Reviewed
$1,374.50
Be Cool polished radiator modules offer impressive looks and cooling performance. They're offered in a variety of sizes and styles—including crossflow and downflow—for fitment on countless vehicle applications. Perhaps you're working with an LS swap and want an exact fit radiator and single or dual fan combination. You'll find these options and more available from Be Cool.
Not Yet Reviewed
$1,499.99
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$1,399.95
$1,033.95
—
$1,258.95
Be Cool aluminum radiator power cooling modules are designed to properly cool your vehicle. Kits include: * Aluminum dual 1 in. core performance radiator with oval fluted tubes * Aluminum fan mounting brackets or straps with hardware (where applicable) * Diamond-cut, vented coolant recovery tank (where applicable) * Fan wiring harness(es) with 40 amp relay(s) * Be Cool billet radiator cap (when noted) * One 16 in., dual 11 in., or two 13 in. high-torque Euro black electric puller fan(s) (in selected kits) * Natural or polished aluminum finish * Bolt-in installation * Fan upgrades sold separately
Not Yet Reviewed
$1,299.99
It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays
( 8 )
$1,499.99
Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek GM LS Vortec EFI wiring harnesses give you full control over your wiring job. Designed for coil-on-plug based LS-1 iron block engines found in most Chevy and GM trucks and SUVs, the kits include the correct, new GM connectors as required, along with crosslink, fire-resistant wire. Each kit has 20 ft. of wire for each sensor allowing you to cut to the proper length, and the wires are color-coded and printed with the sensor and terminal they connect to. Telorvek systems are fully functional, closed loop system, which allows the engine to run like factory. Due to the complex anti-theft found in these computers, your ECM will need reprogrammed. The Detail Zone can provide a host of other services on the ECM, including removing all the emissions. Key features: * Telorvek panel is stainless steel construction * High-quality SAE relays and connectors * Color-coded and labeled wires * Simple, straightforward instructions * Sensor connections pre-installed * ECU reprogramming available (sold separately) * Perfect for engine swaps, hot rod, GM vehicles, and track cars
Not Yet Reviewed
$1,131.85
Sikky Manufacturing LSX swap driveshafts are strong one-piece units available in steel or aluminum. They are fitted with high-strength U-joints and are suitable for LS T56 transmissions. Your Sikky driveshafts will come with their Limited Lifetime Warranty and peace of mind.
Not Yet Reviewed
$1,039.99
—
$1,499.99
On Sale
What a difference a few minutes can make! RideTech control arm bushing kits deliver a direct-fit Delrin system that's easy to install and offers lasting performance. Within minutes, you can swap out all of your control arm bushings for upgrades with the right stiffness, lower friction, and excellent stability—enabling you to take corners with confidence. It's a simple modification with big rewards; replace your old loose, spongy factory rubber bushings with a set of Delrin control arm bushings from RideTech for unrivaled control. Order the kit tailored for your specific vehicle application. RideTech control arm bushing kits feature points: * Bushing design eliminates control arm shift * Reduction in deflection creates more consistent and predictable handling * Trunnion design captures bushings from both sides, increasing strength and rigidity * Designed to resist binding at extreme alignment settings * CNC-machined 4130 chromoly trunnions
( 5 )
$1,400.00
$1,260.00
On Sale
DeWitts LSX modified radiator modules are designed to fit into the stock mounting and use the factory connections when installing an LS engine. They're manufactured and furnace-brazed in DeWitts' own furnace. The cores feature two rows of cooling tubes, a serpentine fin, and are epoxy-free. The radiators' press-formed end tanks are manually TIG-welded by expert craftsmen, providing the ultimate in strength and appearance. Included is an aluminum shroud with a Spal electric fan mounting in position, one wire harness, and a temperature switch. DeWitts LSX modified radiator modules are available with a standard finish, an exclusive black ice epoxy coat for a great OEM look, or polished. Over a hundred models are available (crossflow or downflow) for vehicles from the 1960s and '70s. They can also be ordered with a built-in transmission cooler for your automatic equipped vehicle.
( 17 )
$1,468.99
—
$1,711.99
$1,322.09
—
$1,540.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
