Availability
Showing In Stock Items. Show All 17 Items.
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$1,299.95
—
$1,499.95
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$1,040.51
—
$1,046.51
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$1,015.50
—
$1,080.50
Go retro with Edelbrock Performer RPM LS1 intake manifold kits. These kits give you the opportunity to use a carburetor on your originally computer-controlled engines. Performer RPM LS1 kits include a wiring harness and an MSD ignition controller (compatible with 24x and 58x) which works with OE sensors to fire the coil-on-plug ignition system and offers a choice of six timing curves. A special throttle and transmission bracket that works with 700R-4, 200R-4 and Turbo 350 transmissions is included. Make your LS1 engine an easy retro-fit into any muscle car, street rod or marine application with American-made Edelbrock Performer RPM LS1 intake manifold kits.
( 10 )
$1,027.95
Pack some more power into your Coyote-powered Mustang with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. These manifolds were original equipment on 2013 Mustang Cobra Jet factory race cars and are proven to give you power increases without sacrificing torque. They are constructed from lightweight composite material that is extremely durable, even under racing conditions, but is still compatible with production fuel rails. To beef up the power band, the engineers at Ford Performance Parts utilized the larger GT500/Cobra Jet throttle body and optimized the runners to make peak power at 7,750 rpm, making your car a beast at the track. Don't mess around with unproven parts when you can get track-proven results with Ford Performance Parts 5.0L 4V Cobra Jet intake manifolds. Additional features include: * Significant power increase above the M-9424-M50BR Ford Performance Parts Boss 302 intake manifold with no loss of torque * Total intake volume 635 cubic inches * Designed and tested to 20+ psi * O-ring intake gaskets included * Requires throttle body M-9926-MSVT, M-9926-CJ65, or M-9926-SCJ * Requires Cobra Jet 5.0L Cold Air Kit M-9603-M50CJ to mate to oval throttle body * Mustang GT requires installation kit M-9444-M50B or equivalent (inlet hose in kit not used) * Not compatible with strut tower brace * CJ inlet tube does not have provisions for aspirator tube hook up common to automatic-equipped 2011-14 Mustang GT * Calibration is necessary to prevent engine damage! * Calibration not included!
Not Yet Reviewed
$1,381.99
These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.
( 10 )
$1,214.50
Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads are bolt-on performance upgrades for Gen III HEMI engines. They are designed to fit with the stock intake manifold, exhaust manifold, valve cover, rockers, spark plugs, and accessories, as well as Hellcat components. The cylinder heads have been machined to be used on either the driver or passenger side of the block. They are cast from A356 aluminum and are heat-treated to T6 specifications. Edelbrock Performer RPM Chrysler Gen III HEMI cylinder heads feature fully CNC-machined combustion chambers, along with CNC-profiled bowls and port entries/exits for improved airflow. They also feature more material in the deck and reinforced combustion chambers for increased cylinder pressures. The rocker bosses have been reinforced for improved stability and strength, and extra material has been added around the intake and exhaust ports to allow for porting in racing applications. Both the intake and exhaust port flanges have remained in the factory location for use with OEM components. The intake and exhaust valves have been tipped away from the bore wall to unshroud the larger valves, while maintaining factory geometry. The seat diameters have also been increased for improved heat transfer and durability over stock.
( 3 )
$1,611.50
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,459.50
Compact, vehicle-mounted ARB on-board high performance twin air compressors are designed to do everything! Activate your ARB Air Locker differentials, air up a 35 in. tire in less than a minute. and run air tools. These 100 percent duty cycle (under room temperature conditions) compressors are built to support all of your compressed air needs including the high-volume airflow needs of most air-powered tools. Features of ARB on-board high performance twin air compressors include: * Constructed primarily of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components * Pressure switch-controlled air manifold system regulates pressure * Highest air flow rate and high-efficiency design minimizes power consumption * Sealed components for moisture and dust resistance * Hard-anodized cylinder bores and PTFE-impregnated carbon fiber piston seals for reduced friction and maximum life * Ducted, sealed, brushless DC cooling fan and anodized motor mount brackets effectively dissipate heat from the motors, heads, and electronics * Anti-vibration, sound-deadening mount * Relocatable, splash-resistant air filter assemblies for cleaner, cooler air supply and versatile water-resistant air intake positioning * High-density and high-flow washable sintered bronze air filter elements * Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids (requires Air Locker manifold kit ARB-171503, sold separately, to mount solenoids) * Dual, heavy-duty Maxi-Fuses for in-line circuit protection and true circuit redundancy in case of a fault * Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation * Motors are internally thermal-protected against extreme temperature damage * Compressor pistons equipped with a heavy-duty, European-made cylindrical roller bearing * Over-pressure safety valve-equipped * Sealed, illuminated, automotive-grade dash switch included * Fully serviceable, replacement parts available * EMF-suppressed for use in proximity to sensitive electronic equipment * CE and C-Tick compliant * Engineered, built, and individually dyno-tested in Australia
( 4 )
$1,066.60
Trick Flow® PowerPort® 270 Max Wedge-style cylinder heads will significantly improve the power of your big block Mopar right out of the box. How? Well for starters, PowerPort® 270 heads are made from premium grade A356-T61 aluminum. That's important because it weighs a lot less than cast iron and is very strong. Trick Flow® engineers fixed the shortcomings of the factory head design by relocating the oil holes for the rocker shafts and optimizing the shape of the runners to increase flow velocity and add much needed strength to the shaft bosses. PowerPort® 270 heads also feature larger, raised Max Wedge-style intake runners that provide a straighter path to the valve for improved airflow. The runners are treated to Trick Flow's® signature high resolution CNC Competition Ported surface finish that guarantees proper dimensional accuracy with balanced flow from runner-to-runner for maximum power potential. Additional advantages of PowerPort® 270 heads include clearance for 3/8 in. pushrods, ductile iron valve seats, bronze alloy valve guides, and multi-angle valve seat machining on precision Serdi® equipment. Assembled cylinder heads come with premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, chromoly and titanium retainer options, and 7 or 10-degree steel valve stem locks. They are available fully assembled or as bare castings. Sold individually. Since swapping cylinder heads can be a costly and time-consuming process, Trick Flow® designed the PowerPort® 270 heads to use all factory-style big block Mopar pistons. They also are manufactured to accept aftermarket roller rocker arms, and headers. A Max Wedge-style intake manifold is recommended for best performance.
( 12 )
$1,249.99
—
$1,649.99
P-Ayr replica short blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting.
( 9 )
$1,299.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
