Availability
MSD 7AL-3 ignition boxes have been a favorite of sportsmen and racers that want adjustments at their fingertips. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus there's an RPM Activated Switch for precise control over a circuit. These ignitions combine high-output spark energy for high-compression race engines, combined with the most popular drag racing accessories, including a 3-step rev limiter, 4-stage retards, a start retard, and an rpm-activated switch. MSD is re-launching the 7AL-3s with upgraded features, a new look, and updated internal components, including surface mount circuitry. The new 7AL-3s are easy to spot with a black anodized housing and a new adjustable start retard circuit. Racers will also be happy to learn that the ignition can now be used on 4, 6, or 8-cylinder engines! Additional features include: * Fits the same mounting footprint as the original 7AL-3 * Start retard is adjustable with plug-in retard modules * Retard stages require positive 12 V to activate * Surface mount assembly reduces internal components
( 30 )
$1,099.95
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
DIS-4 Plus HO digital ignitions are higher-output versions of the DIS ignition controls from MSD. They're designed for full race engines running high boost pressures from turbos, blowers, or nitrous. Their increased output will light up fuel mixtures even under these extreme cylinder pressures. Your late model distributorless ignition system will never be the same! The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They're managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals. Also, there is now a true step retard that can be activated through your nitrous solenoid wiring! The DIS-4 HO Plus digital ignitions are designed for 6 or 8-cylinder engines with three or four coil packs.
( 1 )
$1,199.95
MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$1,199.95
MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.
Not Yet Reviewed
$1,099.95
Vehicles today are built with an abundance of control modules (computers), all working to maintain the essential, as well as standard features you enjoy, need, and have become dependent upon. Mopar Replacement offers a huge selection of modules to keep you safe and happy. Their heat seat control modules will make sure you always have a warm comfy seat when the temperatures outside start dropping. Each one is designed and engineered to provide the correct fit and function, matching that of the original they are replacing. The smart option to restore the optimal performance of your Mopar is with Mopar Replacement modules.
Not Yet Reviewed
$1,154.99
—
$1,398.99
Mopar Replacement nitrogen oxide sensors detect the amount of NOx gas being emitted from diesel engines. Each sensors information is used by your vehicles engine control module (ECM) to adjust various parameters and reduce those harmful exhaust gas emissions. They are manufactured to OE specifications and designed to fit your specific Mopar application.
Not Yet Reviewed
$1,279.99
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$1,299.95
After installation, DiabloSport modified PCM and inTune i3 packages help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride without popping the hood! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, a DiabloSport inTune i3 tuning device is included to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport modified PCM and inTune i3 package best suited for your ride! More product and specifications include: * The pre-loaded i3 programmer includes dyno-tested performance programs designed specifically for your ride * Responsive high-definition touchscreen that allows you to navigate menus easily while retaining a small form factor * Easily updateable by wi-fi on both Windows and Mac-based operating systems * Multi-vehicle licensing * Scan and clear DTCs * Calibrate speedometer for different tire sizes and/or gear changes * Tune the transmission shift points and firmness * Adjust speed, rev limiters, and much more
( 1 )
$1,599.95
Vehicles today are built with an abundance of control modules (computers), all working to maintain the essential, as well as standard features you enjoy, need, and have become dependent upon. Mopar Replacement offers a huge selection of modules to keep you safe and happy. Their Totally Integrated Power Modules (TIPM) control the distribution of power throughout your entire vehicle via the fuses and a computer. Each one is designed and engineered to provide the correct fit and function, matching that of the original they are replacing. Choose the smart option to maintain the optimal performance of your Mopar's operations with Mopar Replacement modules.
( 1 )
$1,446.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
