Availability
FTI Performance SRL-3 Series billet triple clutch torque converters are designed for engines with some serious power! They're engineered to be locked up under full throttle and can withstand some abuse. The billet lockup piston, triple bearings, and anti-ballooning impeller hub are designed to get the job done. These converters are available in different stall torque ratios and stall ratings to match your engine and transmission combination.
( 6 )
$1,429.00
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$1,274.98
Summit Bucks
The ideal upgrade for performance vehicles with the GM 6L80 or 6L90 transmission, Sonnax extreme-duty 4-5-6 clutch hub and intermediate shaft guarantees maximum protection against shaft breakage. The unique hub design improves oil flow and accepts Powerglide-style frictions to optimize clutch durability. In place of the 2-piece shaft/hub, Sonnax uses a much stronger, one-piece design that eliminates the OE assembly's weak, welded connection. It is custom forged from ultra-high-strength 300M billet steel, and then heat-treated and shot-peened for added durability. This combination of features guards against broken 4-5-6 hubs and the risk of rear splines shearing off.
Not Yet Reviewed
$1,015.08
—
$1,113.02
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$1,049.95
—
$1,299.95
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$1,399.95
ACC Performance LS Wild Boar Outlaw converters are built with the same quality parts as the Boss Hogs, but have the added features of welded fins (or furnace-brazed upon request) and anti-ballooning plates. These converters were designed for applications with added horsepower, such as nitrous and trans-brake. The Outlaw converters are 9.60 in. in diameter and have stall speeds ranging from 2,800 to 4,2000 rpm.
( 1 )
$1,030.71
—
$1,212.59
Yank Performance offers Pro Truck Series torque converters for a variety of transmission applications. These top-of-the-line 10.5 in. street/strip billet converters feature solid billet lock-up clutch and can handle up to 1,200 rear-wheel horsepower. Additional details: * One-piece roller burnished hub * New Torrington bearings * Fully furnace brazed pump and impeller * Hardened splines * Different stall speed options
Not Yet Reviewed
$1,098.99
—
$1,419.99
Not all converters are what they promise or claim to be. Superior performance costs money--always has and always will. With Yank, you get what you pay for. Yank Performance Pro Yank Series torque converters are top-of-the-line 10.5 in. billet units with a solid billet lock-up clutch. They are designed for large shots of NOS and boosted applications. Select from stall speed and single or 3-disc options to purchase the ideal Pro Yank converter for your vehicle. Features: * Rated to 1,200 RWHP * One-piece roller burnished hub for long seal and bushing life * New Torrington bearings * Fully furnace brazed pump and impeller * Hardened input and turbine splines * One free re-stall in first year * 3 yr. warranty
Not Yet Reviewed
$1,098.99
—
$1,206.99
Yank Performance introduces its new line of Power Adder Series (PAS) converters. These are 9.5 in. billet converters based around the successful SS Series product line. This new line of converters is specifically designed for power adder cars with NOS, small turbo, or superchargers. These models will couple up quicker and multiply torque harder. They're rated to 650 RWHP. Order the model with bolt circle designed to fit your application. Additional details: * One-piece roller burnished flanged impeller hub * New Torrington bearings * Fully furnace brazed pump and impeller * Hardened input and turbine splines * Extra-wide oversized lockup clutch material to handle added abuse put down by more horsepower and torque
Not Yet Reviewed
$1,098.99
—
$1,543.99
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,360.99
Eaton NoSPIN differentials maximize traction by delivering 100 percent of the torque and power to both drive wheels. They're engineered to keep both wheels in a constant drive mode, yet have the ability to automatically "unlock" during vehicle turning to permit necessary wheel speed differentiation. NoSPIN models are trouble-free and do not require special lubricants or service adjustments. These differential carriers are available for a wide range of differential case design types and axle manufacturers. Core features: * Works in forward and reverse * 100 percent automatic locking action - even with one wheel off the ground * Provides a fully locked rear axle that automatically unlocks with wheel speeds are different. * Legendary durability and proven performance in a wide variety of applications. * Applies all available torque to wheel with most traction to overcome most any terrain challenge.
Not Yet Reviewed
$1,085.99
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$1,538.99
Not all converters are what they promise or claim to be. Superior performance costs money--always has and always will. With Yank, you get what you pay for. Yank Performance SS Series torque converters are the ultimate street/strip units, working great on NOS or N/A. All SS Series models are highlighted by a 9.5 in. billet steel construction and a solid billet lock-up clutch. Select from stall speed, transmission type, and single or 3-disc options to purchase your ideal Yank SS converter for your vehicle. Features: * Rated to 650 RWHP * One-piece roller burnished hub for long seal and bushing life * New Torrington bearings * Fully furnace brazed pump and impeller * Hardened input and turbine splines * One free re-stall in first year * 3 yr. warranty
Not Yet Reviewed
$1,098.99
—
$1,543.99
Transmission Specialties lock-up Street/Strip torque converters offer exceptional durability in all applications. Many feature a billet front cover, as well as furnaced- and Heli-brazed fins for added strength. No other lock-up converter offers this strength and durability at a similar price point. Select the Transmission Specialties lock-up Street/Strip torque converter best suited for your application. More product features, items, and specifications may include (model dependent): * New billet turbine splines * Computer balanced * Pressure leak tested * Three new Torrington bearings * XHD billet oversized lockup * XHD billet front cover
( 1 )
$1,004.94
"ProTorque is focused on quality … working hard to have something for all levels of performance and to ensure every customer has a product suited to their individual needs and overall vehicle combination." Protorque Pro Drive torque converters are designed for the muscle car and street rod crowd with enough stall to launch the car and efficient enough to drive every day. Each one is built to withstand up to 500 to 850 hp on muscle. They offer many of the same design features as ProTorque's Bullet Race Series torque converters with the ability to drive them on the street. When you want to burn your tires and blow your competition away Pro Drive is the converter to have in your car. Select the Pro Drive torque converter designed for your transmission that meets your needs. Key features: * Unique CNC-machined front cover * Hardened billet splines * Anti-ballooning plates * Furnace-brazed fins * Torrington bearings * Computer balanced * Pressure tested
Not Yet Reviewed
$1,022.00
Transmission Specialties offers Lock-Up Street/Strip multi-plate torque converters for a variety of transmission and engine models. The heavy-duty converters have an oversized billet lock-up piston for exceptional durability in all applications. А billet front cover is standard, and all fins are furnace brazed and heli brazed for added strength. Stall speed can Ье set from 2800-4500 rpms. Order the replacement or upgrade model recommended for your vehicle. Additional notes: * Three new Torrington bearings * New flanged impeller hub * New billet turblne splines * Furnace brazed and heli brazed * XHD billet oversized lock up CI * XHD billet front cover * Computer balanced * Pressure leak test * Best price in the industry
Not Yet Reviewed
$1,529.81
Yank Performance offers Pro Thruster Series torque converters for a variety of transmission applications, including 4L80-E, 4L85-E, 8L90E, THM200-4R, 4L65-E, 6L80-E, 6L90-E, 4L60-E, 4L70-E, THM700-R4/4L60/MD8, and 8L80E models. The ultimate converter for your car, this series loves big camshafts and RPM. These replacement fluid couplings allow the engine to spin independently of the transmission in automatic vehicles, enabling the engine to keep running when the car is stopped, and facilitating smooth power transfer. The street-strip torque converters are available in a variety of stall speed ratings, bolt circles, input spline quantities, and other options. (Yank does not recommend the use of NOS on this series of converters. The reason for this is the shift extension will get too high. All Pro Thruster Series converters are 9.5 in. billet cover with billet lock up clutch. Rated at 650 RWHP.) * One piece roller burnished hub * New Torrington bearings * Fully furnace-brazed pump and impeller * Hardened splines
Not Yet Reviewed
$1,098.99
—
$1,543.99
Yank Performance offers SC Series torque converters for a variety of Chevy transmission applications. They're built on a 10.5 in billet platform with a solid billet lock-up clutch. These converters are designed to work well with positive displacement superchargers and are rated to 1,200 rear-wheel horsepower. Additional details: * One piece roller burnished hub * New Torrington bearings * Fully furnace brazed pump and impeller * Hardened splines * Stall speed options
Not Yet Reviewed
$1,098.99
—
$1,543.99
Yank Performance offers Super Yank Series torque converters for a variety of GM transmission applications, including 4L80-E, 6L80-E, 8L80E, 8L90E, 4L65-E, 6L90-E, 4L85-E, THM200-4R, 4L70-E, 4L60-E, and THM700-R4/4L60/MD8 models. These replacement fluid couplings allow the engine to spin independently of the transmission in automatic vehicles, enabling the engine to keep running when the car is stopped, and facilitating smooth power transfer. The street-strip torque converters are available in a variety of stall speed ratings, bolt circles, input spline quantities, and other options.
Not Yet Reviewed
$1,419.99
Moser Engineering US Gear Pro Series ring and pinion gear sets are CAD-designed, CNC-machined, and computer control heat-treated to ensure you receive the highest quality and best performing components on the market. These Pro Series street/strip gears by Moser are capable of handling most applications. Racing professionals and performance enthusiasts trust Moser US Gear products. They set the standard for high-quality gear sets that are manufactured to the highest material and process standards. Select the size, ratio, and other gear options recommended for your axle application.
Not Yet Reviewed
$1,615.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
