Availability
Showing In Stock Items. Show All 12 Items.
"The cooling is in the copper." Johnson's Radiator Works engine swap radiators feature a 4-row, 2 3/4 in. thick, high-flow copper core, ideal for the best cooling efficiency possible. They are made with heavy-gauge steel side brackets and mounting holes pre-stamped where needed. Antique, vintage, or classic, Johnson's has a radiator guaranteed to cool your vehicle and engine setup. Additional features: * Copper core with one-piece brass tanks * Brass tubes made in-house--125 in. x 0.5 in. * Top tanks stamped from .040 deep draw brass * Quality control start to finish from raw material to finished product * Made with original tooling, equipment, and techniques from Walker * Designed to operate with a 15 to 18 lb. radiator cap (except Flathead application 7 lb. cap recommended) * Brass drain cock
( 2 )
$1,260.00
—
$1,390.00
DeWitts exclusive Corvette restoration radiators are 100 percent exact reproductions for all 1960-72 Corvettes. This "stacked plate" type radiator delivers the ultimate in performance and is brazed with today's state-of-the-art techniques. Each radiator is uniquely date-coded to match your Corvette build date.
( 3 )
$1,589.99
Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.
( 88 )
$1,199.99
—
$1,599.99
AFCO Racing offers a comprehensive line of bolt-in direct fit aluminum radiators in crossflow and downflow styles. All AFCO radiators offer a furnace brazed sealed core without the use of epoxy and are all tested before shipping. Order the fitment specific to your vehicle application. Bolt-in direct-fit radiator features include: * Aluminum construction * 100 percent TIG-welded * Pressure-tested * Pre-drilled mounting holes * Filler neck and drain petcock * Two rows of 1 in. tubes for the maximum cooling available for your vehicle
( 13 )
$1,141.99
—
$1,305.99
AFCO Racing S-10 small block V8 engine swap radiators feature two rows of 1 in. tubes to keep your V8 running cool. Don't risk your engine overheating by using other S-10 radiators that use only a single-row core, instead, for more reliable performance use one of these S-10 small block V8 engine swap radiators by AFCO Racing. Installation is easy and uses rubber isolated pins for mounting the radiator in the stock core support. AFCO Racing S-10 small block V8 engine swap radiators feature: * Built-in mounting brackets * Inlets and outlets are in the correct locations * Billet filler neck offers strength and higher quality appearance over stamped * 100 percent aluminum construction (no epoxy) * Furnace-brazed core—two rows of 1 in. diameter tubes
Not Yet Reviewed
$1,505.99
AFCO Racing LS swap direct-fit radiators are built with the correct inlet and outlet required for the engine swap. They are 100 percent TIG-welded, 100 percent pressure tested and use no epoxy or sealers. These double pass radiators were designed for the rigors of racing, but AFCO added the mounts to allow their superior design on the street. After all, there are more important things to be doing than installing your radiator—like enjoying your truck the way it was intentionally built for—to be driven! AFCO Racing LS swap direct-fit radiators feature: * All aluminum construction * Billet filler neck offers strength and higher quality appearance over stamped * Uses the same tools to install your new radiator as you did to remove the old one * Factory fan shroud provisions on many models * Available with optional fan and shroud assemblies * TIG-welded by skilled craftsmen * Properly positioned inlets and outlets for ease of flow * Drain plugs included
( 3 )
$1,256.99
—
$1,368.99
Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.
( 177 )
$1,080.00
—
$1,319.00
Fluidyne high performance radiators feature aluminum end tanks and 100 percent NOCOLOK brazed aluminum cores, rather than the epoxy-bonded types used by others. These cores are built using high-efficiency cooling fins that deliver maximum performance and durability. The radiators are offered in universal sizes, as well as exact fit, with all brackets, fittings, and hoses set up to match the original equipment layout for easy installation—and they meet ISO 9001 standards for quality. Fluidyne radiators are available in crossflow and downflow styles, and a range of sizes for vehicle-specific applications; some models also include a transmission cooler. Keep your ride cool on the hottest days or at the track with a Fluidyne radiator.
( 31 )
$1,028.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
