Availability
Showing In Stock Items. Show All 26 Items.
Aeromotive A3000 drag race fuel pump assemblies will feed your craving for extreme horsepower. Available with or without the 100-micron fuel filter, your assembly will include the efficient, high-flowing A3000 carbureted fuel pump and integrated true diaphragm-controlled bypass regulator. All the components offer the ability to be independently indexed for a custom installation and maximum performance gains. With features like less weight, more flow at pressure, modular design and options for mounting, these great-looking Aeromotive A3000 drag race fuel pump assemblies fully satisfy.
( 4 )
$1,018.00
Holley ARCA Racing Series HydraMat fuel reservoir systems have fitting locations designed for Road Course or Circle Track use, and they are spec parts for the ARCA Racing Series. During hard cornering, acceleration, stopping, inclines, and low fuel conditions, fuel runs away from the fuel pick-up, introducing air into the system, resulting in poor engine performance, and even stalling. Holley's amazing HydraMat fuel systems are the solution! The mats have surface tension and fluid wicking capabilities, giving them the amazing ability to draw from nearly any area that has contact with fuel and then store it in their internal reservoirs. The sheer size and coverage area of these HydraMats allow them to pull fuel from virtually any area in the tank or cell, eliminating the need for specialty reservoirs and pick-up pumps, saving cost, and greatly reducing complexity. Features and benefits: * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * Works with Alcohol, Ethanol, Methanol, and E-85 fuels * Works with 2-cycle oil blends as high as 20:1 Please note: Not for use with diesel fuels and most oils
Not Yet Reviewed
$1,149.95
Weldon D2345-A electric fuel pumps offer flow rates to support 1,400 hp and higher. These high performance pumps provide precise and consistent fuel delivery. D2345-A pumps feature: * Self-priming * Pump elements are 100 percent tool steel * Bodies are machined from billet aluminum * All billet body pumps are 100 percent serviceable * Breakaway couplings prevent pump/motor damage in the event of contamination * -12 inlet and -10 outlet O-ring ports * Weighs 7 lbs. * Fuel injected engines: 2,800 hp at 50 psi at 16 V (naturally aspirated) 2,400 hp at 80 psi at 16 V (boosted) * Compatible with gasoline, methanol, diesel, ethanol, and all racing fuels
Not Yet Reviewed
$1,236.70
Today's aftermarket world makes it easy to pick up the phone and order 1000 HP for your street car. This has created several challenges for fuel delivery, ranging from hot fuel handling to pump noise. Aeromotive Dual Phantom Fuel Systems have been designed to solve this problem. They come loaded with two Aeromotive Stealth 340 lph fuel pumps, an additional set of electrical bulkheads, and a larger capacity foam and bladder. The pumps provide opportunity for supporting big power (see power ratings below) while remaining OEM quiet. Separate electrical bulkheads allow for an "on demand" fuel system, which reduces the amount of returned fuel and reduces the tank temperature, making vapor lock and cavitation a thing of the past. Also, this feature is a must when a redundant (back up) pump is needed in extreme conditions, such as off-road, desert, and endurance racing. The larger capacity foam and bladder combat fuel slosh while retaining enough fuel to feed the dual pumps. And the best feature is all of this done from your stock tank with no welding or fabrication! Features: * Two 340 lph Stealth fuel pumps * Supports up to 1400 HP EFI with forced induction, 1700 HP EFI naturally aspirated, 1700 HP Carbureted with forced Induction and 2000 HP carbureted naturally aspirated * Black anodized top hat * Four ORB-06 Ports – two supply, one return, one vent * Larger capacity fuel resistant baffle/basket (includes foam and bladder) * Two universal high flow pre-pump filters * Modular design can be cut to height to fit almost any fuel tank * EFI or Carbureted * Turbine pump mechanisms increase durability
( 7 )
$1,026.50
It's hard to find inline fuel pumps that are more powerful and higher flowing than the Aeromotive Pro Series. Engineered for high-horsepower racing engines, these awesome pumps feature the Aeromotive dual-chamber pump design. Additional features include: * Beautifully plated with Aeromotive electroless nickel process * -12 AN O-ring boss inlet port and -12 AN O-ring boss outlet port; adapter fittings included * Fully submersible for custom in-tank pump placement * Supports naturally aspirated EFI engines up to 2,200 hp * Supports forced air induction EFI engines up to 1,700 hp * Supports naturally aspirated carbureted engines up to 2,600 hp * Supports forced air induction carbureted engines up to 2,000 hp
Not Yet Reviewed
$1,093.85
Are you tired of multi-pump fuel upgrades that require a bunch of T-fittings, unreliable hoses and hose clamps? Snow Performance offers you a solution with their multi-pump fuel hats that feature a billet aluminum manifold with CNC-machined passages, making them the nicest high-output fuel pump upgrade on the market! This design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. No detail has been overlooked with these assemblies. The CNC-machined bodies hold the fuel pumps securely and feature Viton® chemical-resistant O-rings to ensure a perfect leak-free fit. The billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels. Snow Performance fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory. To meet your specific vehicle's fuel demands, these assemblies are configurable with a combination of two or three fuel pumps. Select the universal multi-pump fuel hats designed for your application needs. Key features: * Fuel hats are engineered, CNC-machined and built from 6061 billet aluminum * CNC-machined body holds the fuel pump(s) securely and feature Viton chemical-resistant O-rings to ensure a perfect leak-free fit * Billet hats receive a black anodized finish for the ultimate durability and corrosion resistance, making them compatible with E85 and other harsh fuels * Fuel hats completely replace your factory fuel hat/bucket for an easy installation, retaining your factory * Design eliminates the need for hose clamps and rubber or plastic lines that can deteriorate and cause problems. * No detail has been overlooked with these assemblies * Fuel hats feature female AN ORB feed and AN ORB return ports * Fittings are sold separately to adapt to your desired combination of 10AN, 8AN, or 6AN lines Pump configurations are shown below to help assist with your selection: -- 2 Pump Streetable configuration (one 450lph pump and one 470lph pump)—this configuration is capable of supporting 1000+ rwhp on e85 and 1300+ on gasoline -- 3 Pump Streetable configuration (one 450lph pump and Two 470lph pumps)—this configuration is capable of supporting 1500+ rwhp on e85 and up to 2000 rwhp on gasoline and draws 10-12 percent less current than the "Race" 3 pump version -- 3 Pump Race configuration (three 470lph pumps—this configuration is capable of supporting 1600+ rwhp on e85 and up to 2100 rwhp on gasoline and is designed for max/effort/flow
Not Yet Reviewed
$1,195.43
On Sale
Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$1,599.95
$1,438.95
Aeromotive Eliminator marine fuel pumps are "water warriors"! With 25 percent more flow than the A1000 model, they rid your race craft of poor performance by feeding your engine with enough fuel to maintain its winning ways. Eliminators are certified to ISO 8846, SAE J1171, and United States Coast Guard requirements for ignition protection and fire resistance. Plus, these marine pumps are built to survive over 2,000 hours of continuous run time. Battle the waters successfully with Aeromotive Eliminator marine fuel pumps on board. Other Eliminator marine features: * Compatible with all pump and racing gasoline * Up to 2300 hp--carbureted engine naturally aspirated * Up to 1700 hp--carbureted engine forced air induction * Up to 1900 hp--fuel injected engine naturally aspirated * Up to 1400 hp--fuel injected engine forced air induction
Not Yet Reviewed
$1,082.70
DeatschWerks have taken their DW400 electric fuel pump and turned it into an in-tank drop-in module. These modules feature a fuel pump that flows 415 lph and uses an impeller made of a lightweight composite that's impervious to fuels like E85 and race fuel. DeatschWerks DW400 in-tank electric fuel pump modules are available for a variety of applications.
( 9 )
$1,049.00
—
$1,179.00
On Sale
Holley VR1 Series fuel pumps allow you to build your own fuel system tailored to your combination. Featuring brushless pump technology and a twin-screw rotor design, the VR1 fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. The pumps include a 2-step controller for pump speed control and can be ran in one of two different speeds: low speed control for low fuel consumption or full speed for high fuel consumption requirements. Order the Holley VR1 Series brushless fuel pump with controller best suited for your application and build your own winning setup! Product features: * Designed to work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only—must drain and flush after each race event) * Can maintain up to 335 gph flow at 13.8 V * Capable of 130 psi while providing significant flow for forced induction applications where belt driven pumps are normally used * Unlike other pumps, the VR Series are built for continuous duty if needed * Quality construction for durability and good looks * Can be fully submerged in fuel cell or chassis mounted * Maximum amp draw of the VR1 is 19 amps
Not Yet Reviewed
$1,249.95
$1,123.95
Aeromotive universal fuel system kits provide everything you need to completely install a fuel system on your street rod, muscle car, or Pro Street vehicle. Universal kits are ideal if a system for your specific application does not yet exist, or you already have a sumped tank or fuel cell. Kit components include the appropriate EFI or carbureted fuel pump, a billet fuel pressure regulator, two billet fuel filters, braided lines, hose ends, fittings, wiring, a relay, and all additional hardware to install the systems on virtually any car. These systems support a wide range of performance, from 250 to over 2,000 hp, for both fuel injected and carbureted applications. Whether you have a street car, race car, or hot boat, Aeromotive's universal fuel systems are an excellent choice.
( 1 )
$1,394.65
Don't trust fuel injection pump repairs or modifications to an ordinary diesel parts purveyor. BD Diesel Performance has been in the diesel fuel system business for more than 31 years and is a factory-certified Bosch, Stanadyne, Delphi, and Zexel calibration/repair lab. BD builds all diesel fuel injection pumps for stock applications, high performance street applications, race sled pullers, drag racers, and land speed racers.
Not Yet Reviewed
$1,599.00
DeatschWerks DW400 in-tank electric fuel pumps are designed to handle the ever-increasing power outputs of today's aftermarket engines. The DW400 model surpasses the standard benchmark by delivering an industry-leading in-tank flow of 415 lph at 40 psi. These fuel pumps have a 46mm diameter and are suitable for use with pump gas, E85, and race fuels. They're also compatible with pulse width modulated pump drivers. DeatschWerks DW400s ship with a universal fitment kit, which includes fuel hose, clamps, electrical harness, and filter.
( 8 )
$1,049.00
—
$1,149.00
Two is better than one. The single stock CP3 pump runs out of fuel well before peak power is produced. The solution is to install one of these Pacific Performance Engineering dual fueler CP3 injection pump kits. The dual fueler pump and factory pump work in conjunction, each delivering half of the total fuel volume requested by the engine computer. In the event of one pump failing, the electronic controller will automatically switch all fuel delivery responsibilities to the remaining operational pump. The kits will not produce more fuel pressure than the engine ECU requests; they will only increase fuel volume as needed to maintain ECU-requested fuel pressure. For racing applications, the Pacific Performance Engineering dual fueler CP3 injection pump kits can provide fuel flow to maintain fuel pressure to 26,000+ psi. They are essential for highly modified race engines that are seeking to produce up to 2,000+ hp.
( 1 )
$1,259.99
FAST has taken the next step in making EFI easier with these fuel system kits. They cover all street performance applications and most bracket and super class drag racing categories. FAST fuel system kits are perfect for those switching from carburetor to EFI, building new EFI engines, or simply upgrading their current fuel system. In one part number, they include everything you need to supply your state-of-the-art high performance fuel system. Best of all, the components used to create the FAST fuel system kits are made of aluminum and stainless steel to ensure years of long, trouble-free service. Kits include: * Fuel pump * Filter * Y-block(Depending on kit) * Fuel regulator * System fittings * Wiring harness
( 3 )
$1,123.95
—
$1,760.95
On Sale
Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator
Not Yet Reviewed
$1,549.95
$1,393.95
Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 1 )
$1,417.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
