Availability
On Sale
FiTech Go Street EFI 400 hp self-tuning fuel injection systems with Force Fuel systems make the switch from carburetor to EFI about as easy as it gets. Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance. You don't have to mess with the ignition at all. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. FiTech Go Street EFI 400 hp and Force Fuel system combos are too easy not to go for! Order the model with options best suited to your application. Includes: * FiTech Go Street EFI 400 hp self-tuning fuel injection system * FiTech Force Fuel system
( 18 )
$1,235.99
—
$1,491.99
$1,112.39
—
$1,342.79
On Sale
When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup. These trick systems fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it—and the ability to change air/fuel ratios and ignition timing on the fly. Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind. Order the model with options best-suited for your application. Additional features: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Adjustable fan control switch * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet Flow swirl spray annual discharge obtains complete atomization * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 257 )
$1,195.99
—
$1,587.99
$1,016.59
—
$1,429.19
On Sale
EFI conversions made easy--FiTech Go Street EFI 400 hp systems are true carburetor replacements. And the price is a "Go" as well! Good for up to 400 hp, these 4-injector throttle bodies simply swap out your current 4-barrel carburetor for EFI performance. You don't have to mess with the ignition at all. It's too easy not to go for it--FiTech Go Street EFI 400 hp systems. Features include: * Self-tuning fuel injection * Latest Bosch 4.2 wideband oxygen sensor * ECU is mounted on throttle body * Universal base fits any 4-barrel manifold * Throttle linkage suits most transmissions * Three fuel inlet connections * Voltage control fuel pump control * Wet flow technology * Swirl spray annular discharge design * Built-in fuel pressure regulator * Designed for applications making at least 6 in. of vacuum at idle
( 219 )
$1,125.99
—
$1,319.99
$1,013.39
—
$1,187.99
On Sale
FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features
( 41 )
$1,806.00
$1,444.80
On Sale
If you're running a supercharger, blower, or nitrous, and want to ditch the carburetor, you'll need a FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection system. These units mount the self-adjusting ECU on the throttle body, fit any 4-barrel intake manifold, and are designed to support 250 to 600 hp engines. Each system has a hand-held controller with a touch screen for initial setup, a throttle linkage that suits most transmissions, and is manufactured with OE engineering. Models are available with or without a fuel pump. Increased performance is at hand with FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems. Additional Go EFI 4 Power Adder features: * Throttle body is boost-ready * Can change air/fuel ratios and ignition timing on-the-fly * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors * Wet flow swirl spray annual discharge obtains complete atomization * Built-in pressure regulator * Voltage-controlling fuel pump control reduces power under low loads to lower temperatures * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Complete tuning from Pro Laptop software * Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor * Designed for applications making at least 6 in. of vacuum at idle
( 56 )
$1,277.00
—
$1,494.99
$1,085.45
—
$1,270.74
On Sale
More power! FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems are for gearheads interested in major power for road courses or the racetrack, while maintaining overall drivability. These systems combine eight high-flow injectors with an annular discharge increased to 20 streams to handle the massive flow. They fit any 4-barrel intake manifold, and are designed for use on engines from 250 to 1200 hp. The Power Adder Plus features a built-in fuel pressure regulator, an ECU that finds the best tune and self-adjusts to it, and the ability to change air/fuel ratios and ignition timing on the fly. To obtain complete atomization, FiTech uses a swirl spray annular discharge called Wet Flow technology, spraying the fuel in from multiple directions. Go EFI 8 systems with mounted ECUs offer spark control without the need for an external spark box or special distributor. To lower temperatures and extend the unit's life, FiTech uses a voltage-controlling fuel pump control, reducing the juice under low loads. Each system has a hand-held controller with touch-screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. Take on the day, no matter what it brings—with FiTech Go EFI 8 Power Adder Plus 1200 hp fuel injection systems. Additional features include: * Choice of three fuel inlet connections * Will work with CDI box, but not required to control timing * Two adjustable fan control switches * Can be used with an engine-mounted returnless fuel command center * Uses easy-to-replace GM-type sensors and Bosch 4.2 wideband oxygen sensors * Nitrous and boost timing retard strategies and target A/F options * Air conditioning idle speed input kick-up * Many safety features and accessories for nitrous tuning control * Can handle 25 lbs. of boost from a blow-through turbo, blower, or single roots supercharger—and can also take a single stage of wet nitrous * Designed for applications making at least 6 inches of vacuum at idle. * Complete tuning from Pro Laptop software, with 8GB of data-logging
( 37 )
$1,597.00
—
$1,727.99
$1,357.45
—
$1,468.79
On Sale
FiTech Go EFI 2-Barrel 400 hp Force Fuel injection master kits deliver electronic fuel injection with a fuel delivery solution. Each master kit pairs the 400 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. The Go EFI 400 hp throttle body is perfect to update your 2-barrel fed cruiser with the drivability benefits of electronic fuel injection. It has an incorporated ECU producing a simple installation with only a few wires to connect (fuel pump, ignition, power, and tach). FiTech Go EFI 2-barrel is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.
Not Yet Reviewed
$1,324.99
$1,126.24
On Sale
FiTech Easy Street 600 hp EFI system fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel universal in-tank pump modules—255 lph or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 7 )
$1,111.99
—
$1,171.99
$1,000.79
—
$1,054.79
On Sale
FiTech MeanStreet EFI 800 hp fuel injection systems with Force Fuel systems deliver a whole lot of horsepower in small packages. MeanStreet offers an onboard ECU and fuel pressure regulator to bring you simple, clean wiring with an easy install for up to 800 hp. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. FiTech Meanstreet 800 hp and Force Fuel system combos provide your performance engine with a self-tuning setup and the power to dominate! Includes: * FiTech Meanstreet EFI 800 hp self-tuning fuel injection systems * FiTech Force Fuel systems
( 2 )
$1,567.99
—
$1,778.99
$1,332.79
—
$1,512.14
On Sale
FiTech Easy Street 600 hp EFI Force Fuel injection master kits are a combination of the "Midas Touch" and fuel injection upgrade convenience. The Easy Street system's gold finish will spice up your monster motor without losing the old-school style, and the Force Fuel system helps quench its thirst with easy hookup and versatile mounting. Become a dual threat at both car shows and race tracks; order the kit best suited for your non-boosted, naturally-aspirated crate/performance engine application. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.
( 1 )
$1,273.99
—
$1,335.99
$1,146.59
—
$1,202.39
On Sale
FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems with Force Fuel systems are a unique combination of a boost-ready throttle body and fuel injection upgrade convenience. The Power Adder systems allow you to ditch that old carburetor and keep your supercharger, blower, or nitrous setup. The Force Fuel system helps quench its thirst with easy hookup and versatile mounting. Blow away all the competition when you order the FiTech Easy Street 600 hp and Force Fuel systems combo designed to fit your boosted performance engine application. Includes: * FiTech Go EFI 4 Power Adder 600 hp self-tuning fuel injection systems * FiTech Force Fuel systems
Not Yet Reviewed
$1,606.99
—
$1,668.99
$1,365.94
—
$1,418.64
On Sale
FiTech Easy Street 600 hp EFI system Force Fuel/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with a Force Fuel system, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel Force Fuel system--mounts under the hood and is fed with the original mechanical or electric fuel pump, and then supplies the EFI system with the required high-pressure with the internal 340 lph pump. A 1/2 gallon reservoir prevents fuel starvation, while an internal regulator keeps the pressure at a consistent 58 psi. To ensure clean fuel to the injectors, a serviceable 10-micron fuel filter is supplied along with 5 ft. of hose, AN fittings, return line fitting bung, and liquid-filled gauge. * Go Fuel Mini Force Fuel system is ideal for cramped engine compartments and is s fed through a low-pressure mechanical (or electric) pump saving the need to modify the entire fuel system. Equipped with an efficient 255 lph pump and internal regulator to deliver a consistent 58 psi. Can be installed in four positions and is supplied with hose, AN fittings, return line fitting bung, and liquid-filled gauge.
Not Yet Reviewed
$1,484.99
—
$1,546.99
$1,336.49
—
$1,392.29
On Sale
FiTech Go EFI 4 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 TBIs with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The Go EFI 4 system is ideal for everyday drivers to weekend cruisers or even bracket cars making up to 600 hp, and easily fits any 4-barrel intake manifold. Thanks to the built-in ECU, MAP sensor, and fuel pressure regulator, wiring is kept to just a few connections for an easy install. The quick self-learning technology that FiTech is known for, combined with their wet annular discharge design, will have your engine fired up and idling smoothly in minutes. A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info is supplied. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,442.99
—
$1,452.99
$1,226.54
—
$1,307.69
On Sale
You don't need a carburetor—you need a FiTech MeanStreet EFI 800 hp system! These full-featured, self-tuning fuel injection setups deliver a whole lot in a small package. MeanStreet offers an onboard ECU and fuel pressure regulator to bring you simple, clean wiring and an easy install. FiTech's wideband oxygen and annular swirl wet-flow technology, proprietary self-tuning technology, and hand-held controller with touch screen gets your car on the road or track faster and with more power than ever. Would you rather have a perfectly tuned carburetor or an EFI system that tunes itself perfectly? The choice is easy--FiTech MeanStreet EFI 800 hp systems. FiTech MeanStreet features include: * Blacked out diecast throttle body * Hand-held controller with 8GB data log capabilities * Annular discharge * Windshield mount for control * 8 high-flow 800 hp injectors * Built-in fuel pressure regulator * Internal MAP sensor * Throttle position sensor * Idle air control sensor * Coolant temp sensor * Wideband oxygen sensor * Oxygen bung kit * -06 AN fuel inlet fittings * One fan control adjustable from controller * AC kick-up control kit * Designed for applications making at least 6 in. of vacuum at idle
( 46 )
$1,322.99
$1,124.54
On Sale
FiTech Go EFI 4 PA 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with their Go-Spark CDI ignition and either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info is included. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,706.99
—
$1,716.99
$1,450.94
—
$1,459.44
On Sale
FiTech Easy Street 600 hp EFI system/Go-Spark fuel injection master kits deliver an electronic fuel injection kit with a fuel delivery solution. Each master kit pairs the classic gold appeal and modern performance of FiTech's Easy Street 600 hp throttle body with one of several inline or in-tank fuel delivery solutions, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Plus, these kits also provide upgraded spark performance for improved combustion and power output. Choose the FiTech Easy Street master kit with your preferred fuel delivery system. Easy Street TBIs look like factory carburetors, but that's where the similarities end. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to ¬rev up. It accepts the tachometer signal from the coil negative, an HEI distributor, or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture, resulting in smooth performance from idle to high rpm. FiTech Easy Street is supplied with: * Handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. Designed for engines equipped with a distributor, it accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer. Fuel delivery options: * Go Fuel universal in-tank pump modules—340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (naturally aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,321.99
—
$1,382.99
$1,189.79
—
$1,244.69
On Sale
FiTech MeanStreet 800 HP EFI system regulated in-tank pump/Go-Spark fuel injection master kits include fuel delivery solutions to make converting your carbureted vehicle to EFI easier, plus a CDI that delivers high-powered sparks to improve combustion and power output. These systems feature FiTech's power packed MeanStreet EFI throttle body. It is nitrous compatible with eight injectors, an onboard ECU, MAP sensor, and internal fuel pressure regulator to deliver a simple, clean installation. MeanStreet's annular swirl, wet flow technology provides the most complete fuel atomization available, and using FiTech's proprietary self-tuning technology, combined with easy tuning with the supplied handheld touch screen monitor, you'll have your high-powered engine tuned and ready for the street or track. Each matte black MeanStreet EFI throttle body includes cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For your fuel delivery, a Go Fuel 340 lph in-tank regulated pump offers a simplified approach to fuel delivery for fuel injected engines with its single line system. It has a low-profile design, is suitable for most EFI-ready tanks with a depth of 6 1/2 in. to 15 in., and features an -6 AN pressure port and a 4 Bar (58 psi) regulator. The Go-Spark CD ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$1,615.99
$1,373.59
On Sale
FiTech Go Street 400 HP EFI system regulated in-tank pump/Go-Spark fuel injection master kits include fuel delivery solutions to make converting your carbureted vehicle to EFI easier, plus a CDI that delivers high-powered sparks to improve combustion and power output. These systems feature the Go Street EFI ready-to-run throttle body that sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. It delivers the benefits of quick starts, smooth idle, and self-learning technology. It works with most ignition systems and fits most intake patterns to replace your old carburetor. Each Go Street EFI throttle body is supplied with a handheld touch screen controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For your fuel delivery, choose either a 255 lph or 340 lph Go Fuel in-tank regulated pump. Both offer a simplified approach to fuel delivery for fuel injected engines with their single line systems. They have a low-profile design, are suitable for most EFI-ready tanks with a depth of 6 1/2 in. to 15 in. and feature an -6 AN pressure port and a 4 Bar (58 psi) regulator. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tachometer.
Not Yet Reviewed
$1,319.99
—
$1,328.99
$1,187.99
—
$1,196.09
On Sale
FiTech offers Go EFI 4 600 hp fuel injection systems for your performance vehicle. The bright aluminum power adders include Go Spark CDI box; some models come with inline fuel delivery master kit, as well. Go EFI systems are perfect for your everyday driver, right up to your weekend street machine or bracket racer. They feature the fastest, most accurate self-learning available, timing control, wet flow annular discharge, and tons of additional features. Go EFI systems fit any 4-bbl intake manifold (including 4500 flange) and are the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine! They are also the only computer-mounted throttle bodies that offer spark control without the need for an external spark box or special distributor. Other features include a built-in fuel pressure regulator and hand-held controller with touch screen for quick and easy initial set-up.
Not Yet Reviewed
$1,423.99
—
$1,705.99
$1,210.39
—
$1,450.09
On Sale
When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. FiTech Go EFI 8 PA 1,200 hp systems with Go Spark CDI ignition also provides an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body is available in two finishes and includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.
Not Yet Reviewed
$1,727.99
$1,468.79
On Sale
FiTech Go EFI 4 600 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their Go EFI 4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The Go EFI 4 system is ideal for everyday drivers to weekend cruisers or even bracket cars making up to 600 hp, and easily fits any 4-barrel intake manifold. Thanks to the built-in ECU, MAP sensor, and fuel pressure regulator, wiring is kept to just a few connections for an easy install. The quick self-learning technology that FiTech is known for, combined with their wet annular discharge design, will have your engine fired up and idling smoothly in minutes. A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info is supplied. The throttle bodies are available in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,170.99
—
$1,241.99
$1,053.89
—
$1,117.79
On Sale
FiTech Go EFI 4 PA 600 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their Go EFI 4 Power Adder TBI with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. Go EFI 4 Power Adder system can support up 21.7lbs of boost right out of the box, as well as a single stage of wet nitrous. The air/fuel ratio is monitored and adjusted with FiTech's fast reacting self-learning technology, plus the ignition timing can be controlled based on boost or nitrous (including a retard feature). A touch screen handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info are included. The throttle bodies are offered in different finishes. Choose the master kit with your preferred finish and fuel delivery solution. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. *Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$1,434.99
—
$1,505.99
$1,219.74
—
$1,280.09
On Sale
FiTech MeanStreet 800 HP EFI system regulated in-tank pump fuel injection master kits include fuel delivery solutions to make converting your carbureted vehicle to EFI easier. These systems feature FiTech's power packed MeanStreet EFI throttle body. It is nitrous compatible with eight injectors, an onboard ECU, MAP sensor, and internal fuel pressure regulator to deliver a simple, clean installation. MeanStreet's annular swirl, wet flow technology provides the most complete fuel atomization available, and using FiTech's proprietary self-tuning technology, combined with easy tuning with the supplied handheld touch screen monitor, you'll have your high-powered engine tuned and ready for the street or track. Each matte black MeanStreet EFI throttle body includes cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. For your fuel delivery, a Go Fuel 340 lph in-tank regulated pump offers a simplified approach to fuel delivery for fuel injected engines with its single line system. It has a low-profile design, is suitable for most EFI-ready tanks with a depth of 6 1/2 in. to 15 in., and features an -6 AN pressure port and a 4 Bar (58 psi) regulator.
Not Yet Reviewed
$1,404.99
$1,194.24
On Sale
FiTech Go Port EFI standalone system Force Fuel/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. Along with that will be FiTech's Go Fuel Force Fuel system. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind. FiTech Go Fuel Force Fuel system supports the demands of an 800 hp engine on gas. It is easy to mount, and a serviceable 10-micron fuel filter is supplied to ensure clean fuel reaches the injectors. The reservoir holds a 1/2 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance, and the Force Fuel system also includes 5 ft. of high-pressure fuel hose, fittings, return line fitting bung, and a liquid-filled gauge.
Not Yet Reviewed
$1,770.99
$1,593.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
