Availability
Our Summit Racing™ 3 ton steel low profile floor jacks can fit under vehicles that other jacks cannot. Their low profile construction can go as low as 3.3" and are built to withstand the demands of professional shop use. They feature a dual piston design with quick lift pump action, and are constructed from high-grade steel with a powder coated finish and ball bearing rear casters for superior mobility across your workshop or garage floor. Buy with confidence knowing that these jacks have been tested to meet ASME PASE-2019 US safety standards.
( 5 )
$179.99
Quik-Latch Products low-profile hood pin systems come equipped with latch mechanisms, retaining rings, stainless steel nuts and washers, set screws, and hood pins. Are you tired of the traditional-style hood pins that rust and scratch your paint? Go with a new generation of hood fastening technology that far surpasses traditional hood pins with Quik-Latch Products low-profile hood pin systems.
( 61 )
$124.54
—
$299.99
Moroso's unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow. Whether in triple chrome, anodized or powdercoated colors, these low profile racing air cleaners will provide more air flow and improve horsepower.
( 33 )
$121.99
—
$210.99
Whether it's an old lever or the last trick that may have modified the curve of your brake lever, ProTaper Profile Pro XPS brake levers get your ride back to race condition. Keeping your brake system in top condition is a huge safety goal for every race team, and it is vital to have a safe grip to have your braking power at the ready during any race. These levers are available for various models, so find the best fit for your application today.
Not Yet Reviewed
$109.99
—
$139.99
The low profile sump design of these Mr. Gasket oil pans allows increased oil capacity without restricting ground clearance. Specially designed internal trap door baffling, combined with custom oil pump pick-ups, keep oil pressure fluctuation to a minimum. These oil pans feature beautiful chrome plating or a bright orange paint finish. They're ideal for both street and racing applications.
( 6 )
$226.95
SRP big block Chevy small dome profile pistons are designed to fit Edelbrock 110cc and GM Signature series heads. They're 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. CNC-machined domes with radiused valve reliefs provide optimum flame travel. They include a pin fitting, double Spiro locks, and a wall wrist pin. Their CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings and their closed chamber accepts 5/64, 5/64, 3/16 rings. Pin upgrades are available.
Not Yet Reviewed
$149.99
Total Seal AP Advanced Profiling top piston rings are the flattest, tightest tolerance piston rings available anywhere. Intended for hard core racing, they are currently in use at the highest levels of stock car, drag, and open wheel competition. Get the same horsepower producing piston ring technology that Total Seal delivers to the top engine builders in NASCAR Cup, IndyCar, NHRA, IHRA, and Formula 1. AP Advanced Profiling top rings are produced to extremely close axial and radial tolerances with minimal surface roughness. Face coatings include plasma-moly or state-of-the-art proprietary PVD coatings. Total Seal Diamond Finish second rings are produced to the same tight tolerances and are available with a standard taper face or a sharp edge technology Napier design. Combine the two with Total Seal special application oil rings, they are the ultimate ring sets. Additional features and benefits of Total Seal AP Advanced Profiling top piston rings: * Manufactured from 440B stainless steel * Stronger, longer life, and the most precise tolerances * Saves money (fewer teardowns) * Thinner, flatter, and lighter * Conforms better to the cylinder wall * 1.0mm and larger available in any bore size from 2.992 in. to 5.125 in. * Special axial-sizing available * Works well in all applications, notably dirt environments * Easier on cylinders, reducing bore wear * Uses C33 face coating; doesn't allow dirt to penetrate coating * Available in gapless or conventional styles
Not Yet Reviewed
$119.15
ProTaper Profile clutch perch and levers integrate a low-profile design and a factory race team inspired quick-adjust star. These high-tech universal assemblies are precision-forged from 6061 anodized aluminum, and they feature sealed bearings at the lever pivot to virtually eliminate friction and provide a smooth, consistent lever feel. Profile clutch perches are lightweight, and their unique "full-coverage" pivot mount rubber boot keeps the assemblies debris-free. Shift to a winning profile with ProTaper Profile clutch perch and levers. They are available with or without 4-stroke hot start assembly.
Not Yet Reviewed
$104.99
ProTaper Profile Pro clutch perch and levers feature the XPS lever. The Cross Pivot System levers rotate in multiple directions, yet maintain a slim, low-profile blade that you won't find with other folding levers. They're made from 6061 T6 precision-forged aluminum. These extremely successful Profile perches, with the addition of XPS levers, offer you two lever reach adjustment points for 50mm of tunability that will accommodate a wide range of bikes—and just as many riders. ProTaper Profile Pro clutch perch and levers are available with or without 4-stroke hot start assemblies.
Not Yet Reviewed
$176.99
—
$179.99
Maximize cooling and minimize the dollars leaving your wallet with Summit Racing™ low-profile high cfm electric fans. The fans low-profile pusher or puller design make them an easy fit when clearance is an issue, and they'll move a lot of air to cool your setup efficiently. Fan motors are EMC Compliant, sealed and tested in accordance with DIN EN 60529, dust and water proof to IP68. Motors also have built in EMI protection with a resistor/capacitor to eliminate Electro-Magnetic Interference. Order the model for your application needs.
( 2 )
$120.99
—
$170.99
Quik-Latch lockable hood pin kits deliver the same push-button function that you've come to expect from Quik-Latch Products, while retaining the serious holding ability that's required of hood pins. Their reduced physical presence ensures a clean and unassuming look that will blend in with your overall build. The bodies are 6061 T-6 aluminum construction with 303 stainless steel used for the hood pin material, and a choice of three finishes is available. The perfect final touch to your project's hood would be the Quik-Latch low-profile lockable hood pin system.
( 12 )
$227.28
—
$247.74
Wilwood forged Dynapro low-profile lug mount calipers combine pure race technology with performance enhancements. A new generation of calipers, they are specially designed for limited outboard rotor hat clearance and narrow swept area rotors. Dynapro calipers are stress-flow forged from premium-grade billet aluminum, fitted with stainless steel pistons, and incorporated with a highly fortified radial transition that eliminates steps and shoulders between the piston housings and the bridges. These calipers offer a sleek profile with superior strength, a firm responsive pedal with outstanding stopping power, and a forged machined finish that provides the performance and looks you want for competition or show. Upgrade your vehicle with Wilwood forged Dynapro low-profile lug mount calipers.
( 3 )
$194.72
—
$272.71
For lots of cooling power in a little bit of space, install Flex-A-Lite low-profile S-Blade universal electric fans. They're only 2 5/8 in. deep, but the 15 in. wide x 13 1/2 in. high single fans move 1,250 cfm at 11 amps, while the 26 1/4 in. wide x 15 1/2 in. high dual fans move 2,500 cfm. The glass-reinforced nylon S-blades make all of that air move quietly and efficiently, and most fans include rigid brackets and through-core installation kits.
( 19 )
$187.99
—
$209.99
Sikky Manufacturing low-profile steering shaft assemblies include two joints, a shaft, and hardware to help provide you with a high-quality, direct replacement steering shaft that will increase precision and provide sharper steering response. The rag joints typically used in the OEM shaft have been removed, which eliminates the sloppy and less-responsive feel that is common with those models. Using precision CNC components allows for an extremely rigid and responsive feel, making for a nice upgrade to your factory setup. They are also ideal for LS swapped builds that require extra clearance. Order the Sikky Manufacturing low-profile steering shaft assembly best suited for your application.
( 1 )
$265.99
Astro Pneumatic 20-ton low-profile bottle jacks are designed for operating either manually or pneumatically. Speedy and versatile, air/hydraulic bottle jacks are far quicker than using conventional hand-operated hydraulic equipment—and they are much safer since air power permits one-handed operation and enables user to watch load more closely. Heavy-duty design makes them ideal for a wide variety of automotive, truck, industrial and construction work. These low-profile bottle jacks are fitted with a safety valve against overloading. The air hose can swivel in any direction of connection from air source and extension screw offers added height when necessary.
Not Yet Reviewed
$154.99
Ultimate Headers extreme low-profile clamps offer an innovative solution for connecting exhaust system tubing where ground or body clearance is a problem. Cast from the same corrosion-resistant 316L alloy stainless steel as Ultimate's header and collector flanges, these connector flanges are engineered to stand up to the heat, stress, and vibration of high-performance engines. In addition, these low-profile clamps add a special level of elegance to any header/exhaust system installation. When clearance is an issue and strength is very important, Ultimate Headers extreme low-profile connector clamps deliver outstanding performance. Features include: * Allows up to a 13-degree offset for quick, easy installation * Uses a rugged, detachable, claw-style hinge * Increased ground clearance * Available for 2.5 or 3 in. tubing * Includes slip-in back-up mandrel to assure a leak-free, air-tight junction * Uses ARP hex head, 5/16 in. stainless steel bolt, washers, and nut to secure the joint * Available in two finishes: as-cast and mirror finish * Includes radiused flair tubing stubs
( 1 )
$229.00
—
$259.00
Performance Tool low-profile service jacks are designed for cars and light-duty trucks. They feature a low-profile design that allows them to get under lowered cars and they have a lift range of 2 3/4 to 20 1/2 in. They also have an extended side flange for strength and durability, as well as a dual-position rubber saddle pad for faster lifts. If you're looking for a high-quality jack for your dropped ride, Performance Tool low-profile service jacks are the perfect jacks for you.
( 61 )
$224.99
Low Range Off-Road low-profile front Toyota leaf spring hangers can be used as part of a solid axle swap for IFS trucks (serving as a front rail crossmember) or to provide greater strength and new configuration possibilities (i.e., the "rears-up-front" swap) in older trucks with a solid front axle. Additionally, they can be positioned to correct caster issues resulting from the use of longer springs. Order the model recommended for your application.
Not Yet Reviewed
$157.94
These OTC low-profile fluid receiver drain pans are perfect for those hard-to-reach areas. OTC designed these low-profile drain pans with a splash screen to prevent spillage and splashing and four casters to provide easy maneuverability.
Not Yet Reviewed
$116.99
HardDrive low-profile LED taillights add style and increased visibility to your bike. They are available with the tag light facing up or down, will fit OEM and most aftermarket square back taillight bases, and include plugs for '98-down and '99-up fitments. Select either a red or smoked HardDrive low-profile LED taillight for your motorcycle.
Not Yet Reviewed
$152.06
Wilton Low-Profile drill press vises are for smaller quill travel applications, and they're backed by Wilton's lifetime warranty. Product features: * Base has four 1/2 in. shoulder slots for quick, easy positioning on the machine table * Black oxide coated ACME threaded screw provides consistent clamping force * Designed for many applications, including drilling, tapping, and reaming * Durable construction with fine grain cast iron castings and hardened steel vise jaws * Hardened V-grooved jaws hold round shaped objects both vertically and horizontally
Not Yet Reviewed
$187.99
K Tool low-profile service jacks are designed for cars and light-duty trucks. Their design allows them to get under lowered cars. If you're looking for a high-quality jack for your dropped ride, K Tool low-profile service jacks are the perfect jacks for you.
Not Yet Reviewed
$121.99
Gain more clearance at the front of your 4Runner with All-Pro Off-Road's low-profile front bumper side supports. These side supports provide more room for larger tires and create a better approach angle to larger obstacles. These high clearance front bumper side supports are a direct bolt-on addition to the All-Pro Off-Road 2014+ 4Runner low-profile front bumper and are available in a choice of bare and powder-coated options. Additional features and benefits: * 3/16 in. steel construction * Available in bare and black powdercoat option * These side supports are only compatible with 2014+ 4Runner Low Profile Front Bumper * Zinc plated hardware * No drilling or welding required, however, cutting the plastic bumper is required to install side supports Note: Not compatible with Limited Edition 4Runners.
Not Yet Reviewed
$199.99
Wilwood forged DynaPro low-profile DS lug mount calipers combine pure race technology with exclusive Wilwood performance enhancements to deliver a firm, responsive pedal with outstanding stopping power. Especially designed for limited outboard rotor hat clearance and narrow swept area rotors, these FDPLP-DS forged billet aluminum calipers include Wilwood's proprietary dust seal technology that protects the piston bore from dust and corrosion and Quick-E-Clip pad retainers for fast pad service without caliper removal. Wilwood forged DynaPro low-profile DS lug mount calipers provide a sleek profile with superior strength and performance available in hard anodized, powdercoated, and polished finishes.
Not Yet Reviewed
$284.71
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
