Availability
ICON Premium Forged custom order pistons allow you to specify the exact piston you need in order to match the pistons you already have. These single replacement piston options have many of the same features, just like the original pistons in their ICON Premium Forged full piston sets. Specification information is required to place an order. Please call 1-800-230-3030 to order.
Not Yet Reviewed
$164.99
These U.S. Wheel custom order dropship only wheels offer you the option of special backspacing for your application. They require a specification sheet to be filled out when ordering. Please call sales at 1-800-230-3030 to order.
( 13 )
$105.99
—
$269.99
These NHRA and IHRA-accepted premium alloy axles from Moser Engineering are custom-built specifically for your vehicle. They are induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier, so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. They come available with a press-fit or screw-in stud axle flange and a choice of stud diameters. Studs are not included. All Moser axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously, each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing ®. All custom-order axles are Special Order and Non-Returnable.
( 15 )
$243.00
—
$255.00
These NHRA and IHRA-accepted premium alloy C-clip axles from Moser Engineering are custom built specifically for your vehicle. Induction heat-treated to optimize torsional strength, and then 100 percent magnafluxed. That gives the axles the strength of a race-only application at a high performance, street axle price. Complete the above Instructions to collect the specs needed or call us for expert assistance. They are shipped directly from the supplier so shipping times may vary. Moser can make any axle for your needs, whether you have a difficult-to-fit rear-end setup or you need your axle shortened and re-splined. Available with a press fit or screw in stud axle flange and choice of stud diameters. Studs not included. All Moser C-clip axles are custom-made. Call 1-800-230-3030 for more information. Non-Returnable; obviously each axle is custom and built to order. Prices may vary depending on chosen options. Get the axles you need from Moser and Summit Racing. All custom order axles are Special Order and Non-Returnable.
( 6 )
$200.00
—
$255.00
Howards Cams will design and grind a custom cam just for you. They will consider all of the variables with information that you provide to develop a cam with peak power within the rpm range that your engine needs. Crafted from the finest grade race-quality billets, your Howards Cams special grind camshaft will be manufactured on high-precision cam grinding machines. All hydraulic and mechanical flat tappet camshafts will be 100 percent Rockwell checked and parkerized, ensuring a hard, wear-resistant quality. To protect all of this excellence and be certain that your special cam reaches you in nothing less than perfect shape, your cam will be packed and shipped in one of Howards Cams' unique, high-impact plastic reusable cases. You can expect the best from Howards Cams.
Not Yet Reviewed
$250.99
—
$264.99
U.S. Wheel's 97 series wheels are steel wheels based on the modular design. These wheels feature 10 round holes with a simulated bolt-in center for a 2-piece look. A high-luster chrome finish gives them that show-quality look. They're available in both standard and reverse offset models to fit nearly any combination. Reverse offset wheels have less backspacing and more dish, which may interfere with some brake and wheel opening configurations. Center caps are sold separately.
( 62 )
$116.50
—
$216.99
The Undercover II gives you a little more from your hidden speaker system. Custom Autosound has developed the Undercover II with an 8 in. woofer and two Piezo tweeters in each unit. Undercover II speakers can be mounted anywhere they will fit, on walls or under seats. These units are a great addition to your Custom Autosound radio, adding 200 watts of sound each. Each unit measures 3 in. H x 11 in. W x 12 1/2 in. D. They are sold in pairs.
( 5 )
$191.00
Custom Autosound developed kick panel speaker pods in the 1980s to enhance the sound quality of classic vehicle radios. These components enhance the interior appearance of your ride, provide great sound, and install with no modifications to your ride. Their custom application-specific design will fit perfectly with your classic door panels, and you can paint their quality material to match the interior of your vehicle. Choose from the line of Custom Autosound kick panel speaker pods best suited for your application.
( 9 )
$110.00
—
$163.00
Custom Autosound USA-230 radios are an excellent choice for classic car or truck enthusiasts looking for a more affordable radio without sacrificing quality electronics and a classic stereo look. These radios are designed to fit in the stock dash without any modifications required. The USA-230 has the same appearance and all of the features offered in the USA-630 model—simply without USB port, iPod dock, and CD changer control. The USA-230 does provide an auxiliary input which can connect to iPods, iPhones, satellite radio tuners, or any other device with a headphone jack. It also boasts 4 Channel RCA pre-outs and a digital display with electronic tuner, 16 station pre-sets, and a 4-way fader. Order the model recommended for fitment in your vehicle.
( 10 )
$239.00
Custom Autosound Bluetooth adapters offer a hands-free solution while cruisin' in your classic car—as many states have passed laws to prevent you from talking on your cell phone while driving. These adapter modules are designed to connect to your Custom Autosound USA-630, USA-66, Slidebar radio, Secretaudio SST or Secretaudio SRMS radio. They are the next generation of what was the iCAMKIT for Custom Autosound. The adapter kit connects to the CD changer connector on the back of radio and allows you to stream your favorite music and phone calls directly from your iPhone, iPod, Android, or your other Bluetooth enabled device. BluKit Bluetooth adapter features: * Plugs into CD changer port * 6.5 ft. cord to Bluetooth button * 3.5 f.t cord from button to microphone * Plays A2DP enabled Bluetooth devices * CD changer port on control box allows connection of 6-disc changer of CD-1
( 4 )
$129.00
The Custom Autosound Corvette soundbars are a great speaker solution for your 1963-82 Corvette. The sound bar features two 4 in. speakers, along with two mid-range drivers and two tweeters. Everything comes prewired to allow you to simply wire it as though it is two speakers for an easy install, high-quality speaker solution in your classic Corvette. With 200-watt peak power handling, these soundbars are perfect for running off the radio or you can use an amp to get the most out of your speakers. Key features: * Fits 1963-82 Chevrolet Corvette Coupe * Includes six speakers * 200-watt power handling * Adjustable * Speaker panel measures 18 in. L x 7 in. H x in. D * Center panel measures 24 in. L x 6 in. H x 2 in. D
( 6 )
$174.00
Turn your plain old fenders into show-stoppers with these stainless steel fender trim kits from QMI. They're constructed from pure-grade stainless steel and are polished to a mirror finish. Additional features include: * End-to-end rubber seal guard * Custom-made for your application--no trimming or bending * Predrilled holes for easy installation * 5-year warranty against rust, corrosion, and defects
( 58 )
$111.99
—
$193.99
Summit Racing™ 5-layer custom car covers are available to shelter a range of vehicles from classic and modern muscle cars to Jr. Dragsters and Teslas. Featuring all-weather fabric for indoor and outdoor use, our covers have a multi-layer, non-woven construction with a polypropylene outer, an inner moisture barrier, and a soft Spunlace inside lining to protect fine paint finishes. Choose the proper fit for your vehicle from the Summit Racing™ 5-layer custom car cover selection available. Additional features: * Excellent protection in all climate conditions * Sewn in the USA with the highest quality standards * Increased strength and dust protection * Ding protection, high UV protection, and excellent moisture resistance
( 23 )
$183.99
—
$241.99
Rhodes Race Cars custom fuel cells are small and ideal for Circle Track, off-road truck, and road and drag race applications. These cells are built from .100 in. thick 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship. They feature an aircraft-style flush-mount cap, plus AN fittings for the pick-up, vent, and return fittings.
( 8 )
$129.95
—
$234.95
Stewart Warner Custom Deluxe Green Line gauges feature original 1960s artwork and style. They have polished stainless steel bezels, brushed silver centers, and black faces with the famous green line. The Stewart Warner Performance Custom Deluxe Green Line gauges are available in either 2 1/16 in. or 2 5/8 in. diameters, in your choice of electrical or mechanical, depending on the gauge style. Whether you are building a custom dash panel or mounting gauges in a pre-fab panel, these Stewart Warner Performance Custom Deluxe Green Line gauges bring back the look of old.
( 50 )
$113.99
—
$159.99
RESTOPARTS® Manufactured offers custom molded bucket seat foam for a wide range of vehicles from the 1960s, '70s, and '80s. This precise reproduction seat foam will restore the factory-fresh look and comfort. If your existing seats have lost some or all of their original shape, simply order the replacement foam designed to fit your application.
( 11 )
$112.99
—
$259.99
Cal Custom™ stainless steel dually wheel simulators are a great looking, less expensive alternative to replacing your wheels. They're available for a variety of applications and do not require re-balancing.
( 44 )
$118.99
—
$241.99
FFP Customs Smart Coil mounts are designed for a small block Ford with the stock-style valve cover bolt pattern. No welding or drilling is required; FFP has designed this as a quick and easy bolt-on and go. The mounts utilize the top two valve cover mounting holes to fasten in place. All necessary hardware is included for mounts and coils. Mounts are available for a wide range of Ford applications from the 1960s and up.
( 1 )
$184.99
—
$185.00
Custom Autosound offers universal speakers in a variety of sizes, shapes, and placements within your vehicle. Select the style, wattage, and sound quality features preferred for your application. New speakers can enhance both the audio experience and visual appearance within your interior.
( 1 )
$114.00
Custom Autosound Undercover I speaker systems provide solid sound where space is an issue or where altering the integrity of your classic vehicle is not an option. Undercover I speaker systems are designed for underseat or horizontal wall installations. These compact units have one 5 1/2 in. 120-watt woofer and a piezo tweeter in each enclosure, and they will fit under the seat of most pre-1978 cars and trucks. Fill your vehicle with the sounds you love using Custom Autosound Undercover I speaker systems.
( 1 )
$149.00
On Sale
Create a solid, luxury car feel and take the guesswork out of sound deadening with Dynamat Xtreme Custom Cut kits! They isolate vibrations, reduce heat, and stop noise for a cool, quiet, and comfortable ride. Custom Cut kits are made specifically for your application, precut to the exact sizes that you'll need for your vehicle's interior sheet metal or fiberglass. Dynamat Xtreme with Vector Chemistry is a patented sound deadener with a .060 in. layer of butyl and a .004 in. aluminum face. They provide the highest efficiency of sound deadening properties available. You'll experience better sound and bass from your music and eliminate annoying road noises. Simply peel and stick these self-adhesive Dynamat Xtreme kits to your interior surfaces for amazing results. Use them on doors, floors, hoods, trunks, and roofs for the ultimate in driving comfort! Dynamat Xtreme Custom Cut kits are offered for a variety of applications in a choice of coverage areas.
( 72 )
$133.95
—
$292.95
$120.56
—
$263.66
Have you attended to every detail of upgrading your vehicle? How about upgrading that old factory stock grille for a really noticeable transformation? IPCW offers a wide range of custom all-chrome conversion grilles to replace your original grille. These affordable replacements are made from durable ABS plastic with a rich chrome finish. Order the model designed for your specific make/model application. IPCW custom grilles offer an immediate facelift for the front-end of your vehicle.
( 1 )
$109.99
—
$140.99
Ford Performance Parts custom billet wire looms not only look good, but will protect your wires, too. They keep all of the wires neat and away from the headers, and are adjustable to fit most Ford V8 engines. The looms feature a billet aluminum construction with a number of available ball milled logos. Features include: * Fit 8mm and 9mm wires * Keep all wires neat and away from headers * Adjustable brackets fit all big and small block engines except FE series * Use with universal spark plug wires
( 8 )
$132.99
Make your point! Cal Custom™ spiked lug nuts will furnish your rig with a tough, aggressive look that's sure to appeal to the masses. They're available in cool chrome or deep dark black to match or accent your wheels. Okay, these wheel accessories are quite popular and they do look great—but even better, when you order the steel spiked lug nuts from Cal Custom™, you'll find the price to be well within your budget. Point made!
( 3 )
$119.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
