Availability
On Sale
Born May 18th, 1926 in East Los Angeles, John Mazmanian got his start in hot rodding at the ripe old age of 14, building a 1930 Model A coupe he'd procured for $25 in his junior high school auto shop class. "Big John" later purchased a brand-new 1961 model Chevy Corvette and immediately turned it into one of the hottest Vettes in history. He won his class at the first Winternationals in 1961, setting an AA/SP class speed record of 109.96 mph in the process. After some modifications, John returned to the 1962 Winternationals. With a different block mounted with a Hilborn injector, a GMC 4-71 blower and lots of Isky innards, his team came back to break 129 mph and 11 seconds ET in the Modified Sports class. Now, you can own a 1:18 scale replica of the 1961 #36 Original Mazmanian Chevrolet Corvette Gasser! This stunning diecast model is a limited edition, with only 500 collectibles produced. Here are some of the sports car features: * Opening doors and trunk * Removable hood * Blown 238 Fuelie engine * Custom headers * 5-spoke drag wheels and tires * Parachute pack * Poseable steering * Cloth seat belts * Detailed chassis
Not Yet Reviewed
$159.95
$109.50
On Sale
Shiftworks automatic transmission shifter cables are the next best thing after the originals. They are flexible, adjustable, and feature stainless with a non-booted modern dry sweep design. They also offer well over 2 in. of travel for proper shifting into all gears and are available in a choice of lengths. Costing less than the originals, but just as good, Shiftworks automatic transmission shifter cables get you in gear for performance at the right price.
( 54 )
$111.99
$100.79
On Sale
Reach the roof with Go Rhino Dominator D360 hitch steps! Featuring Go Rhino Dual-Step design, they offer two steps--a 3 ft. top step with high-grip rubber pad and a lower hoop step fitted with a perforated pad. The construction is heavy-duty steel and the strength, as well as durability is unmatched. You have a choice of black powdercoat or polished stainless steel to complement and/or match your existing side steps and bed rails. Installation is easy--without tools--into standard hitch receivers. Step up for easier, safer access to your truck bed or roof with Dominator D360 hitch steps from Go Rhino!
( 16 )
$169.99
$144.49
On Sale
Shiftworks shifter conversion kits offer shifter solutions for a variety of make/model vehicles. If you've tried to use your factory-installed console or automatic floor shifter when swapping out your old transmission, you soon realize that it doesn't fit. But, with Shiftworks kits, they will. These assemblies have what you need to keep your classic ride looking original and shifting with modern performance. Whether you're replacing your Powerglide or upgrading to an overdrive transmission, your favorite factory shifter will still be there—and working great—thanks to Shiftworks shifter conversion kits.
( 72 )
$237.99
$214.19
On Sale
The top of your Homak RS Pro cabinet can become your new shop workbench. Heavy-duty MDF board is wrapped with great-looking and easy-to-clean stainless steel to convert the top of your cabinet into added workspace. The MDF board underneath will take the punishment.
Not Yet Reviewed
$199.99
$179.99
On Sale
Engineered with precision and quality materials these MOMO Racing Retro Series steering wheels are the perfect replacement and upgrade for any classic European, domestic or tuner car. They feature a 3-spoke design, with black leather with white stitching around the grip that provides a high-end period-correct appearance and feel. The Retro's hidden hardware achieves a streamlined look that draws attention to its black and chrome horn button. Set your interior off from the rest with a MOMO Retro Series steering wheel.
( 10 )
$288.99
$231.20
On Sale
By far the best way to go, EBC DRC Dirt Racer clutch kits are total rebuild options, including all-driven lined plates and new springs to completely reset your clutch to the all-important original stack height from when the bike was new. DRC Dirt Racer clutch kits give smooth clutch take-up, using anti-swelling, alloy-impregnated, heavy-duty, cork-based facing for long-lasting and reliable clutch kits.
( 1 )
$168.17
$151.35
On Sale
Racing Automotive Group steering quickeners are the lightest and most compact units available. Their compact design offers more room in the driver's compartment which makes it easier to mount in confined spaces. These parts are used to modify the steering ratio of a factory-installed steering system, which in turn modifies the response time and overall handling of your vehicle. The steering quickeners are available in various lengths, with or without spline.
Not Yet Reviewed
$149.99
$134.99
On Sale
Service your Auburn limited-slip differential with their spider gear kits. These pinion gear kits offer the convenience of receiving everything you need to restore optimal rear wheel performance to your vehicle.
( 1 )
$172.99
$155.69
On Sale
Go Rhino 360 Series hitch steps feature extra-thick tubes that attach to your hitch receiver and provide easy access to the roof rack or truck bed. They also offer extra protection to vulnerable bumpers. Go Rhino 360 Series hitch steps are available in various materials, finishes, and sizes; they install in seconds and come with a convenient storage bag.
( 6 )
$139.99
—
$224.99
$118.99
—
$191.24
On Sale
Get organized with our Summit Racing™ shelves, racks, and mounts. They'll give you a place to put everything--things like oils, fluids, ratchet straps, and other tools--right where you can find it. That means you can spend more time concentrating on your next round and less time searching for your stuff. They're ideal for garages and shops, too!
( 35 )
$276.99
$249.99
On Sale
Engineered to survive the jobsite and outlast the elements, Milwaukee GRIDIRON Zip-to-Thigh Bib Overalls are built for tradesmen who can't let cold slow them down. Focused on providing reinforcement in areas where traditional workwear fails, GRIDIRON ripstop polyester outlasts 12 oz. cotton duck by 3x against abrasion and tearing. FREEFLEX stretch panels across the inner legs— combined with lighter, more durable materials—maximize mobility by reducing bulk and eliminating break-in time. NO DAYS OFF Weather Protection provides wind and water resistance and combines with high loft insulation to combat the most extreme weather conditions. Order your inseam and waist size. Additional details: * GRIDIRON ripstop polyester is 3x more durable and 25 percent lighter than 12 oz. cotton duck to survive the jobsite without the bulk of traditional work wear * GRIDIRON reinforced high-wear areas * Tarnish-resistant all-metal zippers * Durable metal buckles won't bend or break * 100g high-loft insulation * Adjustable waist provides 2 in. of flexibility for more comfortable layering * Utility chest pocket provides quick access to commonly used items—and secure zipper storage for electronic devices and valuables * (2) front hand pockets, (2) large back pockets, (3) side leg pockets * Tape measure and hammer loops
Not Yet Reviewed
$169.99
$129.00
On Sale
Transform your roof rack into a kayak carrier with a Thule DockGlide watercraft rack. This 4-piece, flexible rack features two independent pivoting saddles with angle adjusting levers to conform to the shape of your kayak's hull, plus two felt-lined rear saddles to help guide and center the kayak on your vehicle. Each DockGlide includes center load straps with buckle bumpers and QuickDraw tie-downs, accommodates kayaks up to 36 in. wide, and has a load capacity of 75 lbs. They fit a variety of Thule, OE, and aftermarket roof rack crossbars, and are backed by Thule's limited lifetime warranty.
Not Yet Reviewed
$299.95
$238.95
On Sale
Safely transport your kayak or stand up paddleboard with DockGrip watercraft racks from Thule. These 4-piece rack systems feature four independent pivoting saddles, each lined with felt to prevent damage to your watercraft and equipped with angle adjusting levers to conform to the shape of your kayak or paddleboard. DockGrips include center load straps with buckle bumpers and QuickDraw tie-downs, accommodate kayak or paddle boards up to 36 in. wide, and have a load capacity of 75 lbs. They fit a variety of Thule, OE, and aftermarket roof rack crossbars, and are backed by Thule's limited lifetime warranty.
Not Yet Reviewed
$299.95
$238.95
On Sale
Thule offers space-saving watercraft racks that hold up to four kayaks stacked on their side. They feature a fold-down steel design with non-scratch outer coating—and provide fast installation and removal, thanks to quick on/off hardware. The optimally sized carriers leave roof space for other Thule accessories, as well. Additional details: * Carries up to 4 kayaks and requires 1 to 2 people to load and unload them * Includes straps to transport one kayak * Accommodates kayaks up to 36 in. wide and weighing 75 lbs. * Fits Thule racks * Requires Thule rack systems crossbars, round bars, or factory racks
Not Yet Reviewed
$219.95
$174.95
On Sale
Engineered for use with the PerTronix Ignitor III ignition modules, these PerTronix Flame-Thrower HC E-core coils are also compatible with most capacitive discharge boxes. So, you have options here! These coils charge to peak current typically 36-60 percent faster than other coils and yield an incredible 60,000 V. Supported in a special heat sink made from 6063 T5 aluminum that efficiently transfers heat away from the windings, these E-core design coils are what high efficiency and performance are all about. Get more bang for your buck when you combine PerTronix Flame-Thrower HC ignition coils with PerTronix Ignitor III ignition modules!
( 18 )
$112.45
$101.20
On Sale
Aeromotive VaporWorx Intelligent Power Centers provide modern safety for your classic vehicle. Not available with traditional relay on/off controls, VaporWorx Intelligent Controllers deliver up to 25 amps per channel of 12 DC negative ground power. They can be used in new installations or to replace an installed traditional relay, and they are ideal for carburetor-equipped vehicles with electric fuel pumps and intercooler pumps. VaporWorx IPCs are offered with single channel, dual channel, or dual channel with map sensor. Select the one needed for your vehicle. Features and benefits: * XLPE wire and sealed connector -- 15 in. of wire for each signal circuit -- Pre-wired into a genuine Delphi sealed GT280 connector -- Wire braid is also included -- 6 ft. of white 12-gauge wire included for the pump--circuit * Assembled with UL94 rated components * Pre-terminated heavy-gauge ground input wiring -- Controller switches the ground input to the pump * Very conservative power rating -- Power rating limited by the GT280 plug assembly, not the electronics -- The electronics can support 36 amps with an option for higher power, if needed * Output short circuit protection -- If pump or wiring downstream of the controller shorts, the IPC will shut down the output power * A 3-second prime cycle at initial key-on -- No longer will the pump continue to run when the engine is not running * Accident safety: Output power de-energizing when the engine tachometer signal goes to zero (engine not running). In case of an accident and the engine shuts off, the controller will shut down the pump, keeping fuel from pumping uncontrolled in case of a pressure line breakage * Manual override to allow tuning (adjust float bowl level, etc.) with ignition on/engine off * Manual override for intercooler pumps with the key-off/engine off (modified wiring connections)--great feature to cool down air-to-water intercooler systems between mile runs * Dual channel IPCs: -- Connecting to the supplied 3bar MAP sensor will turn the second output/pump on at approximately 4 psi ATM boost * Dual channel IPC with MAP sensor: -- Supplied with a 3bar MAP sensor and MAP sensor mounting bracket
Not Yet Reviewed
$172.90
—
$238.70
$155.61
—
$214.83
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$192.55
$173.30
On Sale
Get better traction and improved performance with ITP Mud Lite XTR tires. ITP incorporated high performance radial construction into these tires to provide a smoother ride and offer more traction than bias-ply tires. Feel the rush as you push the limits of your ATVs with these super-aggressive treads. They feature 1 1/8 in. deep lugs that are angled for superior bite!
( 10 )
$176.99
—
$251.99
$159.29
—
$226.79
On Sale
Gone are the days of having to guess which beam pattern will be best for you. Versatility meets performance with the KC HiLiTES Flex ERA 1 Light Master kits. With 2430 lumens of power in the high power mode in a compact package, the FE1 lights are perfect for all short-range lighting applications from bumper and ditch lights to dust lights and reverse lights. Combine this with Amber LED backlight for style, and you've got the best of all worlds! The FE1 mounting brackets are designed asymmetrically to make sure you can mount the lights practically everywhere, and the brackets feature adjustable mounting depth, width, height, and orientation. These Master kits bundle two lights, plus all three beam pattern lenses, along with spare O-rings, black and yellow KC logo covers, and a complete wiring kit—everything needed for the install, so you can spend less time in the garage and more time out on the trails! Product features and details: * Pre-assembled lenses in Spread Beam * Flood beam lenses * Spot beam lenses * Two power modes for style and performance * Amber LED backlight * Full power (off-road use only) * Lights can be mounted right side up, upside-down, or sideways via the included brackets with asymmetrical design * Customizable machined bezel colors (sold separately) * Thermal LED protection * IP68-rated Flex ERA 1-2-Light Master kits include: * (1) Flex ERA 1 light with right-hand bracket * (1) Flex ERA 1 light with left-hand bracket * (2) Pre-installed Spread Beam lenses * (2) Flood Beam lenses * (2) Spot Beam lenses * (2) Lens replacement O-rings * Complete plug-and-play wiring harness with LED switch
( 1 )
$179.99
$161.99
On Sale
Flexibility radiates with the FLEX ERA 3 Dual Mode SAE fog lights by KC HiLiTES that clock in for multiple jobs at once. These vehicle-specific fog light kits come with everything you'd want out of a street-legal fog light. You can choose the pre-installed clear lenses for pure performance on foggy mornings before the caffeine hits—or use the included selective yellow lenses for greater visibility in heavy rain, fog, snow, and dust. Light up the roadways with the fog beam as your "low beam", then flip the switch for an off-road, high output "high beam" when you cross into the dirt. FLEX ERA 3 Dual Mode SAE fog lights are built to be everything you need, all-in-one. Kit contents vary, depending on your application needs. Blurring the lines of what a fog light is and isn't, the KC HiLiTES FLEX ERA 3 Dual Mode SAE Fog Lights will defy everything you know a fog light to be. You no longer have to pick between Team Clear (white output) and Team Yellow when it comes to the color options. The master kits include both sets of lenses (clear and yellow) to allow you to try out both options in all kinds of scenarios to pick which one is best for your needs. Note: These kits are designed to be plug-n-play installation with vehicles that were factory equipped with fog lights.
Not Yet Reviewed
$274.99
$247.49
On Sale
Holley spark plug wires will energize your project! They offer a variety of styles and configurations for countless vehicles from the 1990s and up. The wires are available assembled or cut-to-fit. Whether you're looking for high-temperature protection, race, street, motorcycle, or stock replacement, Holley has the right spark plug wires to match your needs—and supply the juice you desire. Order the set recommended for your application.
( 14 )
$187.95
$103.95
On Sale
Today there are so many ways that true "old car" aficionados can complement their pride and joy. Thanks to Redline LumTronix, now you can spice up your treasure with the Elite Diamond conversion headlights! These are direct bolt-on headlights that replace the stock originals—and feature a Euro-style reflective base and diamond crystal glass that produces a brighter light with additional side light and contrast. With these extra bright Redline headlamps, you'll increase your visibility and get more side light than any other headlights can generate. Redline lights and accessories will make your classic stand out, while providing many years of reliable service. Select the Redline LumTronix Elite Diamond conversion headlights in the size and shape preferred for your vehicle. Elite Diamond conversion headlight enclosure features: * Steel housings * Crystal clear glass lens * No prisms in the lens to block the light—an absolute clear lens * Plugs directly into stock harness * Blue halogen H4 bulb—blue in color when off and bright white when illuminated (no blue tint) * Replaceable bulb assembly * Fluted parabolic pattern on the reflector * Housing fits both High and Low beam bucket socket—may require minor modifications to headlight bucket on older models * Available with or without integrated LED turn signals and Halos Blue Halogen H4 bulb features: * 55/60 Watt 12 volt H4 Halogen low/high beam bulb * Blue in color when off and bright white when illuminated (no blue tint) * Lumens: 1200 lm (per bulb) * Rated for 560 hours of use Kit includes: * Elite Diamond headlight(s) * H4 Halogen bulb(s) * Ceramic tip pigtail H4 harness to protect OEM headlight harness * Foam rubber pads included to place in retainer ring for glass lens crack prevention
( 2 )
$171.95
—
$279.95
$103.17
—
$167.97
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$255.65
$230.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
