Availability
Showing In Stock Items. Show All 79 Items.
On Sale
Add safety your brake system with LEED brake proportioning valves! These brass prop valves are equipped with a safety switch that's designed to sense when your brake system is producing unequal or lower pressure to one or more of the wheels—usually caused by a component failure. Without this valve installed, if a component fails on your vehicle, the brake pedal will drop to the floor as you pump the pedal, with little to no braking. Don't take chances! Order the LEED Brakes brake proportioning valves recommended for fitment on your application.
( 5 )
$139.99
$125.99
On Sale
BMR lowering springs are designed to improve handling performance by lowering your ride's center of gravity for tighter suspension and reduced body roll and wheel well gap. Cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss, these suspension components are designed for additional spring rate in the stiffer portion of the coil for perfect handling during aggressive cornering. Dozens of lowering spring models are available with various front and rear drop measurements. Select the springs tailored for fitment on your vehicle.
( 490 )
$119.95
—
$289.95
$107.96
—
$260.96
On Sale
Lower your car properly with UMI Performance lowering springs. The front springs are wound from 5160 chrome silicon wire, while the rear springs are made from 9254 chrome silicon. The linear spring rates of each provide a firm but comfortable ride with exceptional handling. Suitable for Pro-Tour, Autocross, and general cruising, these lowering springs are finished with a tough black powdercoat and are available for the front, rear, or in kits with both. Order the parts designed for fitment with your vehicle's suspension. Not all springs are alike—the proof is UMI Performance lowering springs.
( 138 )
$149.99
—
$189.99
$134.99
—
$170.99
On Sale
Belltech Street Performance lowering struts not only provide the performance and safety that you can only get from Belltech, but also allow you to lower the ride height of your vehicle's front-end in 1/2 in. increments. Engineered to provide a premium ride quality for today's trucks and SUVs, their low-speed compression and rebound characteristics provide a great balance between daily driver comfort and overall performance for those spirited drives. Order the Belltech Street Performance lowering struts best suited for your application. Other features include: * Reduced body roll * Enhanced drive-quality * Perfected preset damping forces * Progressive-rate polymer, open-cell, bump stop * Packers to provide perfect bump stop engagement * Made to work with OE springs * Easy installation
( 26 )
$142.00
$127.80
On Sale
Scott Drake lowering leaf springs improve your ride, helping to prevent wheel hop and axle wrap during hard acceleration. By lowering the rear of the car, you lower the center of gravity--enhancing ride performance and handling characteristics. Scott Drake lowering leaf springs are manufactured from quality materials and are painted to closely resemble the OEM appearance. Order the model with lowering/height options you prefer.
( 34 )
$157.95
—
$174.95
$142.15
—
$157.45
On Sale
UMI Performance single adjustable lower control arms are direct bolt-on replacements designed to minimize wheel hop and improve cornering, while lowering ETs. UMI Performance single adjustable lower control arms are constructed from a DOM mild steel tubing 1.500 in. o.d. x 0.120 in. wall and a 4130 chromoly threaded tube adapter. They are completely CNC-machined and fully TIG-welded for outstanding strength. UMI Performance single adjustable lower control arms feature reinforced spring perches and heavy-duty sway bar mounting points. Their high-quality, PTFE-lined spherical rod end allows for quiet, "bind-free" performance, making them great upgrades for both your track and autocross driven cars. The polyurethane bushings are designed to be bolted to the car chassis for quiet, comfortable operation. The control arms feature polyurethane bushings, zinc plated steel sleeves, and "on-car" greasable Zerk fittings. Additional features include: * QA1 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves * Powdercoated finish * Use OEM hardware
( 27 )
$219.99
—
$279.99
$197.99
—
$251.99
On Sale
UMI Performance panhard bar lowering brackets are designed for use with factory axles (may fit Strange rear-ends without modifications). They are designed to lower the driver side mounting point and will work in conjunction with UMI, as well as some other brands of panhard bar relocation kits. In those applications, they prevent panhard bar interference on lowered vehicles. UMI Performance lowering brackets are laser-cut and jig-built for accuracy, and then powdercoated for added durability. The kits include high-grade hardware.
( 2 )
$119.99
$107.99
On Sale
Add an aggressive stance and appearance to your ride with REKUDO performance lowering spring sets. Their progressive spring design will drop the vehicle approximately one inch on both the front and rear for a lower center of gravity and improved handling. The REKUDO lowering springs designed for your application also save you money by working with the factory struts! More product features include: * Reduces/closes unsightly wheel opening gaps * Progressive spring design offers a slightly firmer ride vs. the originals for a sporty feel * Complete set of four coil springs for front and rear of the vehicle * Durable finish
( 2 )
$299.95
$164.95
On Sale
BMR lowering spring kits will improve your ride's handling performance by lowering its center of gravity for tighter suspension and reduced body roll and wheelwell gap. BMR lowering springs are cold-wound from high-tensile strength chrome silicon for a long-lasting, consistent rate without long-term "memory" loss. They're designed for additional spring rate in the stiffer portion of the springs, perfecting the above during aggressive cornering. BMR lower spring kits include front and rear springs to optimize the balance between performance and comfort and give you that precision sports car look and feel.
( 33 )
$279.95
$251.96
On Sale
Stifflers Suspension lower chassis braces dramatically increase the strength and stiffness of the front chassis area. Available for both factory and aftermarket K-members, this additional stiffness minimizes flexing to help maintain correct front suspension geometry while under load. The result is tighter steering response and more predictable handling under cornering and braking. Where applicable, Stifflers' lower chassis braces can be combined with their Spider braces (sold separately) to completely integrate the front and rear chassis sections for unprecedented car control. Features include: * Manufactured from high-strength tubing to maximize stiffness and strength while reducing weight * Design optimized using CAD/CAE software combined with real-world test data * Industrial-grade powdercoated for long life * Select models available that will work with aftermarket long tube headers * Includes hardware and rod ends (where applicable) * Depending on application, welding and drilling may be required
( 2 )
$119.95
—
$189.95
$107.96
—
$170.96
On Sale
Flowmaster 50 series Big Block mufflers have proven to not only significantly improve acceleration and towing power, but to simultaneously increase fuel economy as well. Because of their efficiency, underhood temperatures on trucks and motor homes can be reduced as much as 200 degrees F--helping to lengthen the service life of other engine components. These mufflers are designed and sized for larger gas and diesel engines typically used in towing vehicles and RVs. So, for more comfortable cruising, Flowmaster tuned them for reduced exterior exhaust sound and lower levels of interior resonance.
( 34 )
$283.95
—
$299.95
$255.55
—
$269.95
On Sale
Holley LS engine air conditioner brackets are designed to help you mount your A/C compressor and tensioner in the correct position. They include the necessary hardware to mount the assembly in place—and require an application-specific installation kit, sold separately. Holley cast aluminum brackets are available for a variety of compressor styles. Choose the model needed for your application.
( 29 )
$236.95
$213.25
On Sale
RideTech StreetGrip coil springs deliver ride quality and crisp handling. These dual-rate springs will allow your vehicle to move smoothly and effectively over small road irregularities via compliant spring rates. When your vehicle compresses the springs far enough, through large bumps or cornering, the transition to the firmer spring rates will control the bump or body roll. Even though RideTech StreetGrip springs work best as a complete system, the coil springs are compatible with other OEM components and will offer incremental performance improvements. Order the pair designed for your application.
( 19 )
$245.00
—
$285.00
$220.50
—
$256.50
On Sale
BMR drag race alternator mounting kits are designed to eliminate excess belt length and tensioners. They leave the alternator in the OE location with a manually adjusted shorter belt. BMR drag race alternator mounting kits work with standard diameter or smaller pulleys by simply changing belts.
( 1 )
$199.95
$179.96
On Sale
Sometimes you just want steel! Lightweight alloy flywheels can offer substantial benefits for certain situations, but sometimes they're just not your cup of tea. Maybe you're on a budget, maybe you're running a heavy drag car, or maybe you just don't need those benefits. If that's the case, McLeod has the answer. Their steel flywheels deliver all of the strength and reliability that you need, at a substantially lower price. They're neutrally balanced, but are drilled to accept balance weights for use on externally balanced engines. McLeod steel flywheels available for a wide variety of large and small engines.
( 103 )
$299.00
$269.10
On Sale
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 322 )
$288.05
$259.24
On Sale
Mr. Gasket mechanical fuel pumps are rated from 80 to 110 gph in a variety of applications for many Chevrolet, Ford, Chrysler, and Pontiac V8 engines. Mr. Gasket fuel pumps are suitable for use with street performance and high-output racing applications when a mechanical pump is desired or required. Features include: * Shutoff pressure pre-set from 6.5 to 8 psi depending on application * Fuel pressure regulator is not required due to built-in shutoff * Heavy-duty aluminum construction for continuous high-rpm operation * Lower pump body can be clocked in different positions to adapt to orientation requirements * Inlets and outlets tapped for 1/4 in. or 3/8 in. NPT to match specific applications
( 32 )
$138.95
—
$177.95
$125.05
—
$160.15
On Sale
Patriot Tight Tuck headers provide the solution to many problems associated with engine swaps in modern street rods. They fit in the tightest of engine compartments, and they clear most stock motor mounts. Many Tight Tucks are manufactured from durable 16-gauge tubing and come complete with gaskets, header bolts, and collector reducers. Besides their popular finishes, Patriot also offers a chrome option that is polished before and after assembly for show-quality appearance, as well as a stainless steel option. Order the model designed for your vehicle and engine application. Patriot Tight Tuck finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 65 )
$299.95
$269.96
On Sale
FiTech Go-Spark HEI distributors are very popular choices for street cars, hot rods, trucks, circle track racers, as well as industrial and stationary engines. The coil in-cap design offers a simple, clean installation and reliable operation. Plus, FiTech has addressed all the shortcomings typically found in economy replacement units. FiTech HEI distributors feature: * High performance 5.8 amp dwell limit module--standard GM 4-pin configuration * High-output, performance wound (130:1 high-turns ratio) coil ensures maximum spark energy at all rpm levels * Cap and rotor are molded in high-quality 20 percent glass filled polyester (PBT) that offers high-impact and dielectric strength while resisting carbon tracking * Cap contacts are brass and the rotor spring is stainless steel for long term maximum conductivity * CNC-machined aluminum housing * Centerless ground shaft rides * Extra-long lower bronze Oil-Lite bushings for smooth operation at high rpms * Mechanical advance is welded to the top of the shaft and is plated to reduce friction and prevent corrosion * Melonized iron drive gear ensures long service life * Adjustable vacuum advance allows increased economy while under light load
Not Yet Reviewed
$209.00
$177.65
On Sale
Patriot offers affordable racing headers for many applications in the popular IMCA Modified, Sprint Car, Late Model Sportsman, Street Stock, Mini-Stock, and Pony Car classes. These headers use precision-machined flanges and lightweight, but strong, 18-gauge tubing. Mandrel-bent primaries and long transition collectors reduce backpressure for increased exhaust velocity. Some applications are available with Patriot's stepped pipe design to help broaden the torque curve for better corner acceleration. Patriot race headers are offered in a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
Not Yet Reviewed
$299.45
$269.50
On Sale
What a difference a few minutes can make! RideTech control arm bushing kits deliver a direct-fit Delrin system that's easy to install and offers lasting performance. Within minutes, you can swap out all of your control arm bushings for upgrades with the right stiffness, lower friction, and excellent stability—enabling you to take corners with confidence. It's a simple modification with big rewards; replace your old loose, spongy factory rubber bushings with a set of Delrin control arm bushings from RideTech for unrivaled control. Order the kit tailored for your specific vehicle application. RideTech control arm bushing kits feature points: * Bushing design eliminates control arm shift * Reduction in deflection creates more consistent and predictable handling * Trunnion design captures bushings from both sides, increasing strength and rigidity * Designed to resist binding at extreme alignment settings * CNC-machined 4130 chromoly trunnions
( 5 )
$185.00
—
$285.00
$166.50
—
$256.50
On Sale
The more power your ride makes, the better the chance of bending or breaking your rear control arm mounts. Beef up the upper and lower front control arm mounts on your classic with UMI Performance control arm reinforcement brace kits. These tubular reinforcements tie the upper and lower control arm mounts together for added strength and driving performance. Manufactured from DOM steel and TIG-welded, these trailing arm mount braces are adjustable for a perfect fit. Grade 8 hardware, nuts, and washers are included for a hassle-free install. Buy quality for your American-made muscle--UMI Performance control arm reinforcement brace kits.
( 27 )
$159.99
$132.06
—
$143.99
On Sale
Stabilize your ride with BMR control arms. They are CNC-machined and made, depending on the application, from heavy-duty DOM steel tubing, chromoly steel, or 6061-T6 aluminum. BMR polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. Their greasable bushings are internally fluted to allow grease to coat the inner sleeve, while keeping the thrust surface lubricated—ensuring quiet, reliable operation over the life of the bushings. BMR's heavy-duty spherical bearings are designed to eliminate deflection and wheel alignment changes. Their spherical bearings can withstand the extreme stresses of the performance environment, offering all of the bind-free suspension articulation needed for great handling. These design features result in incredibly strong control arms that greatly improve performance and work well in street performance, drag race, and handling applications. Many are adjustable, allowing you to dial-in pinion angles for correct driveline geometry, or correct, add, or reduce negative camber and other alignment settings. BMR control arms are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!
( 203 )
$159.95
—
$289.95
$143.96
—
$260.96
On Sale
Yukon Gear & Axle ball joints are top-quality, reliable small parts to complete your suspension job. They offer individual lower and upper ball joints, as well as kits with upper and lower to service one side of your vehicle.
( 4 )
$131.99
—
$226.99
$115.59
—
$192.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
