Availability
Air Lift offers replacement hardware kits for all of their systems. This assures you that, should the need arise to disassemble or reassemble your system, the correct service parts are available!
Not Yet Reviewed
$129.99
Hinson Racing has been creating race-proven and champion-selected clutch components for over two decades. Hinson Racing FSC clutch plate and spring kits are manufactured to their strict standards, to enhance the performance of Hinson clutch baskets. While they are race-engineered components, they are also able to be used with OE baskets, inner hubs, and pressure plates. Designed for exceptional performance under extreme conditions, Hinson components have exceptional production tolerances and flatness. High performance with minimal heat buildup, they are made to last.
( 2 )
$199.99
Auburn Gear differential spring retainer service kits provide you with springs, retainers, and pinion pin bolt to rebuild and repair your differential. They offer several different kits to fit a range of applications. Service your limited-slip differential with Auburn Gear spring retainer kits, and know they will fit and function as they should.
Not Yet Reviewed
$102.99
—
$118.99
B&M governor recalibration kits will allow you to adjust the shift points of your transmission after it is installed in your vehicle. These kits are very useful for transmission swaps, or if you have a car that is very light or has a low rear gear ratio. They also work great for bracket cars retaining an automatic 1-2 shift.
( 34 )
$125.95
Sonnax Zip kits are engineered to cure common problems associated with today's automatic transmissions. Sonnax Zip kits eliminate: * Burnt clutches * Line pressure instability * Loss of fuel economy * No line rise * Pressure loss * Shift concerns * TCC apply and release concerns * TCC codes * Pressure switch codes
( 9 )
$125.14
—
$139.21
Auto Metal Direct clutch linkage sets are complete with all AMD individually-available, technically-correct components required—from pedal to clutch fork. The components are heat-treated with the correct protective finishes as the originals. Auto Metal Direct clutch linkage kits include: * Upper push rod, rod boot, and clips * Frame side bracket * Block side stud with seal * Frame side ball stud with nut and washer * Bellcrank felts * Lower adjustable rod * Return spring * Spring extension plate * Clutch fork to bellhousing rubber boot * Bellcrank assembly with installed pivot kit and zerk fitting * Assembly diagram
( 11 )
$124.99
—
$139.99
Sonnax Sure Cure automatic transmission rebuild kits are a comprehensive reconditioning package—featuring the best Sonnax products developed to help mechanics restore and enhance transmission performance. Sure Cure components are the same Sonnax parts sold individually to resolve common valve body complaints, as well as other transmission problems. The high-quality components in each Sure Cure kit will repair worn areas and protect the transmission against future damage. Plus, each kit comes with an easy-to-read, step-by-step installation guide that covers inspection and repair of the most critical areas of the valve body. Additional features and benefits: * Restore shift quality and reduce comebacks * Repairs biggest trouble areas to reduce comebacks * Includes step-by-step instructions for comprehensive valve/pump body restoration Kits Include: * Shims (2) endplay * Pump slide pivot pin * Throttle valve plunger valve kit * Shortened TV link * TV cable corrector kit * Seals D-ring servo * 1-2 or 3-4 accumulator spring * Servo release check valve kit * Reverse boost valve kit * Oversized pressure regulator valve * Pinless 1-2 or 3-4 accumulator piston kit * TV boost valve kit * Bushing pump * Bushing rear stator support * Checkballs
( 6 )
$100.75
—
$176.90
EBC is known for its manufacturing expertise and top-notch products. EBC SRK sport racer clutch kits are no exception. These kits include Aramid fiber-lined friction plates and steel separator plates and springs to provide street-going kits for high performance street and road racing. Some EBC sport racer clutch kits will feature new diaphragm springs, like the ones used in many larger bikes, to provide a complete clutch rebuild kit for every sport bike possible. If you ride hard and need the best, get yourself EBC SRK sport racer clutch kits.
( 4 )
$159.91
—
$276.77
EBC SRC Street Racer clutch kits are the latest KEVLAR® fibre-lined clutches for sport bikes and racers. These replacement clutch kits are complete engine sets, matched and measured and stack height controlled to provide the perfect clutch rebuild. The kits come complete with 15 percent up-rated heavy-duty clutch springs and a KEVLAR® disc with impregnated lining. They're available for a wide range of motorcycles, from the 1970s and up. Order the kit recommended for your application.
Not Yet Reviewed
$101.14
—
$258.35
By far the best way to go, EBC DRC Dirt Racer clutch kits are total rebuild options, including all-driven lined plates and new springs to completely reset your clutch to the all-important original stack height from when the bike was new. DRC Dirt Racer clutch kits give smooth clutch take-up, using anti-swelling, alloy-impregnated, heavy-duty, cork-based facing for long-lasting and reliable clutch kits.
( 1 )
$101.14
—
$261.08
Pro-X Racing complete clutch plate sets offer the best performance in powersports. Their sets contain complete packs of matched friction and steel plates, along with a set of clutch springs. Pro-X clutch plate sets deliver friction plates and steel plates manufactured to exact OEM specifications, mated with heavy-duty clutch springs that are approximately 10 percent stiffer, to provide you with the ultimate clutch performance. Get the most out of your powersports ride for your MX or ATV, install Pro-X Racing complete clutch plate sets.
Not Yet Reviewed
$109.99
—
$224.99
Having trouble getting into gear? Your synchronizer could be worn. Crown Automotive offers manual transmission synchros to restore smooth, accurate shifts. They will prevent gears from grinding during engagement and facilitate optimum performance. You can choose from the wide selection of applications available. Renew your shifting performance—get your collar and gears in sync with Crown Automotive manual transmission synchros.
( 2 )
$103.99
—
$151.99
Twin Power extra plate clutch kits are the perfect solution for your high-performance and stroker engine needs. These kits feature race proven material friction plates on tempered steel cores, and a starburst groove pattern for maximum heat dissipation and oil circulation. All of the clutch plates are manufactured from high tempered steel and each kit comes complete with a pre-set clutch pack height (stock spec) for easy installation. A result of years of development and testing, these Twin Power extra plate clutch kits offer you superior performance to get the power to the ground!
Not Yet Reviewed
$180.37
—
$256.03
Yukon Gear & Axle offers all of the small differential carrier replacement parts that you need to reassemble your carrier. Oil slingers, thrust washers, shims, baffles, guides, spacers, pins, bearing screw adjusters, and more are available to complete your differential carrier project. These components are available for numerous axle models, such as various GM, Ford, AMC, Dana, and Chrysler applications.
( 27 )
$189.99
Noram 1600 Series clutches are designed for more horesepower engines—and eliminate the need for oversizing electric motors to reach starting torque requirements. Designed for 3-15 hp engines, the clutches are available in different tooth counts, for different chains, and for inboard or outboard. Order the model best suited for your application.
Not Yet Reviewed
$228.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 378 )
$100.99
—
$217.99
Half Scale Dragsters carry the Polar clutch replacement components you need for optimum shifting performance. From sheaves, sleeves, springs, and spacers, to bushings, buttons, and posts, Half Scale Dragsters deliver the parts to keep your Polar clutch consistent, smooth, and on track for the win!
Not Yet Reviewed
$106.99
—
$208.99
Motive Gear offers a full line of manual transmission replacement components. From hubs to shafts, and gaskets to bearings, Motive Gear has what you need for your manual transmission repair or rebuild!
( 25 )
$208.99
ACDelco GM Genuine Parts manual transmission components are GM-recommended parts to service your GM vehicle. Manufactured for many makes and models of GM cars, light-duty trucks, and SUVS, these high-quality parts deliver the proper fit, form, and function, along with the reliability and durability of GM OE. Stay with the parts brand your vehicle came with and get the quality you know and trust with ACDelco GM Genuine Parts.
( 2 )
$166.99
Upgrade your classic's performance by utilizing Artec Industries Wagoneer 44 rear axle trusses. These heavy-duty truss systems fortify your axle to survive serious abuse, while providing a flat surface to mount your upper links. Artec Wagoneer reinforcements are manufactured from mild steel, with 1/4 in. thick truss tops and gussets for maximum strength. Your Wagoneer's 44 rear axle will be stronger and sleeker with the addition of one of Artec Industries trusses.
Not Yet Reviewed
$254.99
Warn's premium manual hubs feature a no-compromise design for the hardcore off-roader or truck owner who will accept nothing less than the industry standard in performance. Their all-metal construction and ZA alloy dial ensure years of reliable functioning. The dial requires a full 9/10 of a turn to ensure positive engagement of the inner drive gear to the clutch ring. To make sure that they stay engaged, Warn premium hubs use a thick internal wave spring and heavy dial detents.
( 194 )
$155.99
For fast, precise, and comfortable shifts, grab an American-made Summit billet aluminum short-throw shifter! The heavy-duty body is completely CNC machined—no welds, stampings, or castings—for durability and a precise fit. Inside, the nickel plated steel pivot shaft has been machined to exacting tolerances for smooth operation, and offset pre-load springs help you snag third even when shifting hard. Your shifts are 30 percent shorter, the lightweight forged aluminum stick places the knob closer to the driver, and you can re-use your factory boot and knob for a clean look.
( 130 )
$140.99
—
$144.99
Sonnax shift improver performance packs combine innovative heavy-duty performance calibration for firmer shifts under load without sacrificing low-speed drivability. The precision components in these kits upgrade your transmission for maximum achievement and durability by recalibrating pressures, recalibrating shift accumulation, and including improved parts for areas that commonly wear. They are suitable for any heavy-duty application and are a critical foundation for other upgrades when modifying the transmission for high performance use. Sonnax shift improver performance packs additional facts and features: * Shorter shifts, which get progressively firmer with load * Faster pressure increase and higher overall pressure for greater clutch/band holding power * Three ultra-reliable, patented, billet pinless accumulator pistons * Unique 1-2 accumulator spring combination for shifts with character * Improved high rpm pressure * Third accumulator valve gets the 2-3 right the first time, every time * Consistent results, no guessing on calibration * Prevents worn accumulators and separator plate * Optional TCC on-off conversion prevents excess TCC pressure
( 6 )
$166.99
—
$205.10
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 51 )
$108.99
—
$258.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
