Availability
Showing In Stock Items. Show All 55 Items.
Altronic's hand-held Quick Tree practice trees are just the right size to take everywhere--home, work, or on the road. They can be set for 0.500 second or 0.400 second lights, for a Full or Pro tree. Do you want a true challenge? The opponent side is operational, so you can hone your skills against your friends, or it can be disabled for single-side operation.
( 16 )
$124.99
Powerbuilt All-In-One jack stand bottle jacks are the world's first and only portable jack designed to safely lift and hold both regular and unibody cars and trucks. All unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it's challenging to properly lift and hold a unibody vehicle—because once the vehicle is raised with a jack, there's no space left to add a jack stand. The Powerbuilt All-In-One solves this problem with an ingenious design that safely lifts and securely holds a unibody vehicle using a single lift point. The unijack offers both concave and flat lifting surfaces, accommodating a wide variety of lift points no matter what type you need.
( 7 )
$123.99
Slowly put down the rubber mallet and do the job the right way with Proform main cap removal tools. LS main caps have very tight tolerances, and cannot be removed by simply grabbing and pulling on them--uniform pressure from both sides is the only way to do this correctly. Each of these handy tools will seat itself on the engine block, and by using a mechanical advantage easily pulls the main caps upward, evenly ... making a challenging job easy. Proform tools feature heavy-duty anodized billet aluminum construction and are beautifully engineered for years of use.
( 2 )
$236.99
Hi-Lift Jack UTV jacks should be on your list of must-haves when going 4-wheeling. They have been a main staple of off-roaders for many years and have an incredible reputation. These UTV jacks are shortened versions of Hi-Lift's cast/steel jacks and feature a multipurpose tool on the top end, which can be attached anywhere on the jacks and used for winching, clamping, and as a spreader tool. Where they really shine is in their intended use. Tires normally don't blow a bead on easy sections of trails, which is why these jacks have a wide base, a great securing mechanism, and a long arm for tackling the issues. Off-roading is challenging, fun, and always an adventure. Remember to take Hi-Lift Jack Company UTV jacks along with your other essentials.
( 4 )
$128.99
Milwaukee M18 compact hammer drill drivers are more powerful than the competition. Built with a Milwaukee 4-pole frameless motor, the drill drivers deliver 500 in.-lbs. of torque and up to 1,800 rpm. At only 7 3/4 in. length, they allow you access to the tightest work spaces. An all-metal gear case and 1/2 in. metal chuck provide maximum durability, even on the most challenging jobsites. REDLINK intelligence provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life. Models are available with the tool only—or in kits with various accessories, like battery, charger, and storage case.
Not Yet Reviewed
$269.99
Milwaukee M18 compact 1/2 in. drill drivers are built with a 4-pole frameless motor, which delivers 500 lbs./in. of torque and up to 1,800 rpm. At only 7 1/4 in. length, these tools allow you access to the tightest workspaces. These Milwaukee M18 drill drivers feature an all-metal gear case and 1/2 in. metal chuck for maximum durability, even on the most challenging worksites, and REDLINK Intelligence that provides advanced protection in abusive situations and manages the tool's temperature to provide maximum life.
( 1 )
$139.00
OTC flare nut locking pliers can be any mechanic's saving grace, especially when having to deal with damaged flare nuts that have been rounded or, worse, have become rusted. These specialty tools have a durable body constructed with angled jaws to allow for clearance around frames and bulkheads. They're available to fit standard or metric nuts and bolts and are offered individually or as a set consisting of several different sized pliers. If there's a tough job to be done, OTC Tools is up for the challenge!
( 1 )
$178.99
Clearance
NANUK Equipment Cases are designed to protect your most sensitive equipment in even the harshest environments. Whether battling the scorching heat of the Sahara or the bone chilling cold of the Arctic, every detail of NANUK cases has been refined and perfected to offer the utmost in protection and performance. All NANUK Equipment Cases offer these unique qualities: * Waterproof; watertight to IP67 standards** * High performance gasket * Lightweight NK-7™ resin construction * Impact resistant** * Crushproof * Dustproof** * Powerclaw™ latching system * Soft grip foldable handle * Accepts padlock * 100 percent stainless steel hardware * Automatic pressure release valve (for air travel) * Molded-in bezel system * Integrated lid stay * Stackable ** Certified to have passed ATA300 impact standards, ASTM D4169 impact, rain, vibration and drop tests, Mil-STD-810F immersion test and IP67 ingress protection tests. From their high-impact NK-7™ resin to their PowerClaw™ latches, NANUK cases have been engineered and manufactured to stringent military specifications and are able to surpass the needs of the most demanding users. These virtually indestructible, lightweight, watertight cases offer the ultimate grade of protection in a variety of sizes, configurations and colors. Simply choose a model based on your physical volume requirements and choice of hue. Complemented by a large selection of optional accessories, like foam inserts and padded dividers, and offering an incredible degree of customization, NANUK cases are the best choice to move your equipment in complete security. Whether transporting very expensive equipment around the world or simply protecting sensitive equipment in the urban jungle, NANUK Equipment Cases are up to the challenge!
Not Yet Reviewed
$324.95
$161.21
—
$269.95
Pulling wire and working with conduit is very challenging without the proper tools. And when speed is the issue, Klein Tools WireSpanner Plus telescopic poles extend to 18 ft. in 10 seconds! The poles can easily retrieve cable from a distance without needing an extra pair of hands, shortening installation time. Klein Tools WireSpanner Plus telescopic poles are made of a lightweight orange resin, feature a large hook attachment, include a padded shoulder strap, and are ideal for low-voltage applications.
Not Yet Reviewed
$159.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$241.99
RideTech AirPod covers keep your system under cover and your trunk looking good. These heavy-duty covers provide a professional, aesthetic look for your 3 or 5-gallon RideTech AirPod compressor. The covers are easy to install for a clean, sleek appearance.
( 1 )
$155.00
—
$165.00
These SPC Performance ball joint presses were specifically designed to remove the original equipment ball joints on smaller cars when installing SPC Performance sliding ball joints. Now you can remove the ball joint from the front upper control arm without removing the control arm from the vehicle. These SPC Performance ball joint presses are packaged in a convenient blow-molded plastic case for storage and easy identification.
Not Yet Reviewed
$157.99
There are many steps in setting up a new ring and pinion, and none should be taken lightly. When it's time to set up the pinion preload, you'll appreciate the assistance of Yukon Gear & Axle pinion yoke holders. These specialty tools firmly hold the yokes in place and are compatible with almost all differentials. Yukon Gear & Axle pinion yoke holders make setting pinion preload settings a much easier process.
( 2 )
$174.99
Yukon Gear & Axle differential bearing preload tools, spanner wrench, and side adjusters are all constructed from high-quality materials and have simplistic designs to make your life easier when you're working on multiple different vehicle applications. Whether you're looking for bearings, differentials, or side adjustment, Yukon Gear and Axle has you covered.
( 9 )
$141.99
—
$172.99
Improper alignment could cost you money. OTC special bracket tool sets are necessary to ensure exact alignment of the camshaft sprockets during your timing belt installation.
Not Yet Reviewed
$159.99
Clearance
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$194.99
$103.50
Yukon Gear & Axle setup bearings easily slip on and off the pinion journal to allow for pinion depth adjustment. These setup bearings ensure you have the proper tolerances needed and are a great addition to your toolbox!
( 3 )
$119.99
Take those rides for a real spin with an assist from Tuxedo CR-3000 rotisserie spring perch brackets. These accessories help make painting and other work on vehicles much easier. Designed to aid with keeping a secure hold on the body of the vehicle while mounted to the CR-3000, they are currently available as a standard leaf spring set and a Mopar E-body leaf spring set. Get your vehicle rotators and components from a company known for their commercial-grade reliability and toughness when you order Tuxedo CR-3000 rotisserie spring perch brackets.
Not Yet Reviewed
$246.99
JOES Racing Products double-ended AN wrenches get you into those hard-to-reach places. These tools are precision-machined from 6061-T6 aluminum and are bright anodized in different colors to help you always reach for the proper size in a hurry. Turn a fitting in 15 degree increments with double-ended AN wrenches from JOES Racing Products.
( 15 )
$113.12
—
$199.95
JOES Racing caster camber gauges help to make sure that your setup is accurate. They are machined from billet 6061-T6 aluminum with durable, laser-etched numbers that will last a long, long time. JOES precision caster camber gauges feature an expanded 8 degree range, so you can have a clear bubble reading and avoid the errant readings that can throw your setup off. Several models are available with and without adapters and many also include a case with a handle for easy transport and storage. Get precise readings for your front-end alignment and the most bang for your buck with JOES Racing caster camber gauges.
( 19 )
$139.95
—
$179.95
JOES Racing jack stands are great for use on both dirt and asphalt! They're stable and feature wide feet with urethane pads at the top to prevent slipping. These jack stands are lightweight, portable, and stackable to save you space in your garage or trailer. The heavy-duty stands are constructed from high-quality aluminum and each one offers a 1/2 ton weight capacity. Now you can service those hard-to-reach places more conveniently with your car raised up on jack stands from JOES Racing Products!
( 2 )
$269.95
Autel Tools AutoLink AL629 scan tools are built to help you to determine why the Malfunction Indicator Light or the ABS/SRS warning light is on. These ABS/SRS/Engine/Transmission + CAN OBDII AL629 scan tools support all 10 test modes of OBDII test to provide a complete diagnosis. AutoLink AL629 scan tool features: * Reads and erases DTCs for ABS, SRS, Engine and Transmission on most 1996 and newer major vehicle models * Works on most 1996 and newer vehicles (OBDII and CAN) domestic and importof European, US and Asian vehicles * Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes * Turns off Check Engine Light (MIL) and ABS warning lights, clears codes and resets monitors * Reads, stores and plays back live PCM data stream and live sensor data * Retrieves vehicle information (VIN, CALID and CVN) * Views freeze frame data * Troubleshooter code tips guide technicians to the root cause of trouble codes faster * Graphs data * Multilingual support – English, Spanish, French, etc. * 2.8 in. LCD with 320 x 240 resolution * Internet updatable via USB * Prints data via PC
( 2 )
$173.54
JOES Racing Products shock workstations let you hold onto your shock body and shaft simultaneously. This will make working on your shocks quicker, cleaner, and much easier. Workstations can be secured in your vise or affixed securely to your workbench or pit cart with the workstation base (sold separately).
Not Yet Reviewed
$199.95
JOES Racing Products nitrogen tank regulators feature a maximum 150 psi output. They feature brass bodies, nickel plated bonnet, shatter-resistant polycarbonate gauge lenses, and external relief valves.
Not Yet Reviewed
$219.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
