Availability
Showing In Stock Items. Show All 85 Items.
On Sale
Stop vibrating sheet metal and road noise with Dynamat Xtreme sound-deadening liners. Loud vehicle noise levels cause driver fatigue and irritation, and will affect the way music sounds out of speakers. Dynamat Xtreme is among the highest-efficiency sound-damping material available and highly effective for stopping noise and vibration in your automobile. Enjoy silent energy or clearer music with tighter bass when you order the sizes and quantities of Dynamat Xtreme sound-deadening liners best suited for your application. Product features include: * Dynamat Xtreme is a thin, super sticky butyl rubber bonded to an aluminum alloy skin * Formulated with Vector chemistry * Simple to cut and install * Will stretch and contour better than any other product on the market without tearing * Conforms easily to all interior surfaces * Sticky butyl rubber will adhere to a surface and stay in place without any special surface prep, and without leaving any odor or dripping material
( 253 )
$156.95
—
$245.95
$141.26
—
$221.36
If you need to reduce noise and heat, then Summit Racing™ has you covered with our Ultimate heat barrier and sound-deadening mats. Ultimate heat barrier and sound-deadening mats are ideal for keeping excess heat and noise from your vehicle's interior. They are great for use on firewalls, floorboards, and doors. These self-adhesive mats provide an extra barrier against heat and noise and are available in a variety of sizes, thicknesses, and quantity packages.
( 333 )
$141.99
—
$237.99
LizardSkin Sound Control Formula is a high-tech coating that stops the vibration of sound waves coming from a surface before they enter the air. LizardSkin Sound Control can be used with LizardSkin ceramic insulation; when used together, LizardSkin Sound Control must be applied first. Now, you can achieve the maximum in sound and noise reduction, greatly enhancing your audio system. Typical applications include firewalls, floor pans, transmission tunnels, doors, hoods, trunk lids, under headliners, inside fenders, panel van walls, and other areas that generate vibration and noise. For maximum acoustic performance, coat the entire interior surface and the floor, inside and out. LizardSkin is completely water soluble, meaning it offers an easy cleanup with just soap and water. Each 2 gallon container covers 46-50 sq. ft. with .025-.040 in. thickness.
( 59 )
$184.99
On Sale
DEI Floor and Tunnel Shields II add a new dimension to heat control with minimal clearance needed--only 3/16 in.! Constructed utilizing an embossed aluminum face bonded to a composite fiberglass insulation and backed with an aggressive adhesive that holds past 450 degrees F, these barrier sheets are capable of handling direct temperatures up to 1,750 degrees F. The shields are tough enough for under-vehicle applications. They're also great as a sound barrier, blocking out up to 50 percent of unwanted road noise. DEI Floor and Tunnel Shields II can be cut with tin snips to any shape needed for your application. (Note: Some shields use spray-on adhesive.)
( 67 )
$114.99
—
$188.99
$103.49
—
$170.09
On Sale
Dynamat Dynaliners are general-purpose, one-layer, reticulated acoustic foam used for attenuating low-frequency noise. They have both open and closed window cells to accept sound waves and dissipate them within the cells. also, gives them the ability to reduce heat, as well as resist oil and water. Since it will not hold water, it will not promote rust or mildew like most under carpet padding and thermal insulators. They provide high-acoustical absorption for a variety of vehicle applications, including the floor, roof, doors, and quarter panels.
( 115 )
$117.95
$106.16
Heatshield Products HP Sticky Shields are constructed using dense, 1/8 in. fiberglass insulation and .004 in. thick aluminum, backed with heavy-duty, peel-and-stick adhesive. These flexible heat shields will bend and conform to most any shape and will stick to almost any clean surface! These barrier heat shields are great for use near mufflers, downpipes, turbos, and other system components near the exhaust. Heatshield HP Sticky Shields are resistant to the elements and can be cleaned after installation.
( 47 )
$112.99
—
$120.99
HushMat floor kits are created to reduce thermal transfer into your interior that comes from the engine, headers, exhaust, and catalytic converter. HushMat's proprietary USA-manufactured visco-elastic chemistry dissipates heat insulating your interior, causing less load on your air conditioning system to make your vehicle significantly cooler and more comfortable. Additional features and benefits include: * HushMat butyl sheets are available in stealth black or silver * Self-adhesive peel-and-stick installation (no glue required, no alcohol or acetone wash needed; no installation tools required) * Universal application (can be applied to firewall, floor pan, tunnel, doors, roof, rear wheel wells, trunk, and quarter panels) * Reduces heat and thermal transfer by over 40 percent * Lightweight and super-flexible (less than 1/8 in. thick and 0.47 lbs. per sq. ft.) * Trims easily with standard razor knife or household scissors * Stay warmer in the winter and cooler in the summer (insulates from -30 degrees up to 550+ degrees F) * Reduces road noise and vibration (low-frequency noise from 0 to 1,000 Hz) * OEM approved * Installs in half the time vs. other brands
( 22 )
$109.62
—
$284.78
Flatline Barriers floor insulation and sound damping kits are easy to install, logical in layout, and highly effective! Utilizing cutting-edge technology and materials, these kits reduce the noise from the road and heat from the engine. They're offered in pre-cut kits with self-adhesive backing to provide easy and convenient installation. Whether you want to nix the noise coming from your car or shield yourself from unwanted heat these, floor insulation kits will get the job done! Order the kit designed to fit your vehicle. Floor insulation and sound damping kits feature: * Ultra-lightweight insulation material * Provides exceptional durability * Designed with the DIYer in mind * Meets the Federal Motor Vehicle Safety Standard for flammability
( 22 )
$171.99
—
$228.99
On Sale
Problem noise? With the same proprietary butyl formula as the Dynamat flagship Xtreme damping material, the all new ProX sound deadening mats are twice as heavy, with an even thicker 5 mil aluminum top layer. Independent, third party testing has shown that the Dynamat ProX sound deadening mats outperforms all competition in multiple benchmarks. Product highlights: * Heavier 120 mil butyl core (1 lbs. per square foot) * Thicker 5 mil aluminum layer * Ultimate noise and vibration control * USA made with Dynamat quality * Reduces heat transfer * Moisture-resistant * Super sticky self-adhesive backing
( 1 )
$156.95
$141.26
On Sale
Boom Mat acoustic insulation is constructed of a rubber-based (viscoelastic) polymer layer with an aluminum foil laminate outer facing. The strong adhesive backing is unaffected by extreme hot and cold temperatures, is corrosion-resistant, and can be applied to metals, painted areas, plastic, fiberglass, automotive coatings, and other difficult-to-bond surfaces. This insulation can be applied in horizontal, vertical, and inverted applications, as well as on complex shapes. In addition to being a superior sound absorber and a solution to control vibration over a wide temperature range, Boom Mats are also an excellent thermal insulator. They dampen annoying low frequency noise, and serve as a barrier to unwanted mid-range and high frequencies.
( 54 )
$113.99
—
$232.99
$102.59
—
$209.69
Diesel engines produce a lot of heat, especially in high-output situations like towing, racing, and light-to-light driving. Upgrade your tattered, dirty firewall insulation with PPE Insulator Firewalls. Pacific Performance Engineering firewall insulators create a barrier between you and the engine, reducing heat and noise entering the cab. Each firewall insulator features a ceramic fiber interior sandwiched between a tightly woven silicone fiberglass outer fabric and a woven silica inner panel finished with merrowed stainless steel wire edging and grommets for long-lasting performance and an OEM fit. They can be installed without removing the engine and provide temperature resistance up to 1,290 degrees.
Not Yet Reviewed
$269.99
HushMat Super Bulk kits consist of sound deadening and thermal insulation sheets designed to help eliminate heat transfer that comes from the engine, headers, exhaust, and catalytic converter. The sheets also reduce exhaust drone and annoying road noise that can otherwise disrupt an enjoyable ride. Additional features include: * HushMat Ultra butyl sheets are available in stealth black or silver * Reduces road noise and vibration (low frequency noise from 0 to 1,000 Hz) * Reduces heat thermal transfer by over 40 percent * Self-adhesive peel-and-stick installation (no glue, no alcohol or acetone wash needed; no special installation tools required) * Allows you to stay warmer in the winter and cooler in the summer (insulates from -30 degrees up to 550+ degrees F) * Lightweight and super-flexible (less than 1/8 in. thick and 0.47 lbs. per sq. ft.) * Trims easily with standard razor knife or household scissors * OEM approved and meets or exceeds automotive dampening specs GMO149M (General Motors), WSB-M5G58-A1 (Ford), and MS-CD 629 Type C (Chrysler)
( 6 )
$219.95
Flatline Barriers complete insulation and sound dampening kits are easy to install, logical in layout, and highly effective! Utilizing cutting edge technology and materials, these all-in-one thermal acoustic barrier kits provide everything you need for floor, door, and roof. Designed with the DIYer in mind, the pieces are pre-cut and adhesive backed to allow for easy installation and the perfect fit. Make the inside of your restoration cooler and quieter; start with Flatline Barriers insulation. Order the kit prepared to fit your vehicle. (This product meets the Federal Motor Vehicle Safety standards for flammability.)
( 9 )
$160.99
—
$370.99
On Sale
DEI's ATAC (Advanced Thermal Acoustic Coating) is designed to transform the interior of your vehicle into an oasis of comfort. Say goodbye to the discomfort of excessive heat and annoying noise—and say hello to a serene, cool, and quiet ride! ATAC is a spray-on, roll/brush-on, 2-in-1 sound and heat barrier for automobile interiors that saves time and money. Its unique hi-tech ceramic micro-sphere technology dampens noise and vibration while reflecting heat up to 375 degrees F. The water-based coating is non-toxic and cleans up easily.
Not Yet Reviewed
$119.99
$107.99
On Sale
Dynamat DynaPads are made of a 4-layer composite barrier material utilizing a 1 lb. per sq. ft. vinyl barrier that is sandwiched between two layers of 3/16 in. thick acoustic foam with a urethane top layer. DynaPads are designed to provide an under-carpet sound barrier in automotive interiors and residential and commercial dwellings. They can withstand temperatures between -40 degrees F and 225 degrees F.
( 12 )
$161.95
$145.76
On Sale
Insulate your interior from unwanted heat and noise with a Boom Mat thermal and acoustic interior kit. These versatile 3-step packages include plenty of Boom Mat material to cover flat sheet metal and/or door skins, eliminating most structural vibrations, rattles, and squeaks. Next, the can of Boom Mat Spray-On lets you dampen the noise in hard-to-reach areas, like fender wells, the trunk interior, undercarriage, and other body panels. Finally, you can apply the Under Carpet Lite insulating fabric over firewalls and floor boards to resist nearly 85 percent of the heat transferred from engine and exhaust components—while providing additional sound deadening. Boom Mat thermal and acoustic interior kits are economical, easy to install, and work with any vehicle. Choose the coverage size needed for your application.
( 12 )
$111.99
—
$264.99
$100.79
—
$238.49
Inferno Shields from Heatshield Products are more than just another heat shield. These heat shields can be bent, folded, and twisted to form a custom shape. Heatshield Inferno heat shields come in three different grades of alloy: aluminum (900 degrees F continuous), stainless steel (1,800 degrees F continuous) and Inconel (2,200 degrees F continuous). All of these alloy heat shields have an inner ceramic pad that can be trimmed and then folded over the outer alloy layer for a custom size or fit. This is the perfect radiant heat shield for hoods, firewalls, mufflers, DPF, and more. Create a thermal barrier with Heatshield Products Inferno Shields.
( 6 )
$182.99
On Sale
Create a solid, luxury car feel and take the guesswork out of sound deadening with Dynamat Xtreme Custom Cut kits! They isolate vibrations, reduce heat, and stop noise for a cool, quiet, and comfortable ride. Custom Cut kits are made specifically for your application, precut to the exact sizes that you'll need for your vehicle's interior sheet metal or fiberglass. Dynamat Xtreme with Vector Chemistry is a patented sound deadener with a .060 in. layer of butyl and a .004 in. aluminum face. They provide the highest efficiency of sound deadening properties available. You'll experience better sound and bass from your music and eliminate annoying road noises. Simply peel and stick these self-adhesive Dynamat Xtreme kits to your interior surfaces for amazing results. Use them on doors, floors, hoods, trunks, and roofs for the ultimate in driving comfort! Dynamat Xtreme Custom Cut kits are offered for a variety of applications in a choice of coverage areas.
( 72 )
$133.95
—
$292.95
$120.56
—
$263.66
On Sale
Quiet your vehicle with DEI Thermal and Acoustic interior kits. They replace your existing padding and insulation with DEI engineered UC Lite thermal insulating and sound absorbing material to drastically reduce heat radiating through firewalls, floors, and transmission tunnels. The insulation also quiets road, tire, and exhaust noise. All pieces are CNC pre-cut for an easy fit and quick installation. Create a cooler, more comfortable interior with improved acoustics using DEI Thermal and Acoustic interior kits. Advantages and benefits: * Lightweight for high performance applications * Economical insulating solution * Comfortable interior at any temperature * Quick and easy installation * Enhanced stereo performance and sound
( 2 )
$121.99
—
$241.99
$109.79
—
$217.79
On Sale
These Dynamat SuperLite Bulk Paks are designed for the vehicle owner who wants a quiet, solid ride, while keeping weight to a minimum. They are 30 percent lighter and 30 percent thinner than the standard Dynamat. The Superlite Bulk Paks can be used for full coverage on your vehicle's interior or just in problem areas of high sound resolution.
( 4 )
$291.95
$262.76
RESTOPARTS® Supplied offers sound deadener sets that install under your vehicle's carpet on the floor pan. These insulation pieces reduce cabin noise, heat, and cold—while also protecting the carpet from damaging moisture, etc. The heat barriers are available for fitment on a wide range of 1950s, '60s, and '70s era cars. Order the set designed for your application.
( 7 )
$108.99
—
$115.99
Thermo-Tec adhesive backed Thermo-Guard FR is a high performance insulation solution that's easier than ever to apply. It provides exceptional heat and sound insulation, protecting against radiant temperatures up to 1,500 degrees F. With the new adhesive backing, installation is faster, cleaner, and more efficient, eliminating the need for additional adhesives or fasteners. This advanced insulation maintains all the benefits you've come to rely on: a lightweight yet durable construction, impressive noise reduction, and outstanding heat resistance. The adhesive backing ensures a secure fit on metal, fiberglass, plastic, and more, making it perfect for interior insulation for heat and sound. Thermo-Guard is available in one- or two-sided options, in 24 x 48 in. or 48 x 72 in. sheets.
( 2 )
$134.99
—
$163.99
Summit Racing™ heat shields are ideally suited for heat protection in the space-limited firewall, under vehicle, exhaust path areas, or to wrap certain engine components. These self-adhesive shields measure only 0.24 inches thick and are able to handle up to 1,000 degrees F ambient temperature. They're available in natural aluminum or painted in a high-temperature black coating. Summit Racing™ heat shields can provide a remarkable decrease in protected surface temperatures--and may reduce noise, as well.
( 23 )
$106.99
—
$158.99
With a rating of up to 1,800 degrees F of continuous heat, HP Stealth Shields effortlessly dissipate any heat situation you encounter in day-to-day driving or racing. Mount the shielding inside your vehicle between the outer shell and inner covering (carpet, headliner, etc.) to protect you from the heat radiating from the engine, exhaust, and environment. Available in various lengths and widths at only 1/8 in. thick, Stealth Shield interior heat insulation installs easily, hides beneath the surface, and you can trim it to size with a utility knife.
( 4 )
$163.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
