Availability
Showing In Stock Items. Show All 19 Items.
HEL Performance offers braided stainless steel fuel injector lines for a variety of applications—including many Audi, Merkur, Ford, Porsche, and Volvo vehicles from 1976 and up. Designed for multi-port injection, these replacement hose kits include stainless steel fittings. Order the model recommended for your ride.
Not Yet Reviewed
$165.00
Improved Racing high-flow flapper check valves are ideal for use in oiling systems (wet sump and dry sump), fuel systems, crankcase pressure ventilation systems, and more. Most check valve designs—including poppet check valves, ball check valves, diaphragm check valves, piston check valves, and others—are restrictive, resulting in a pressure drop across the valve even when fully open. Improved Racing's check valves use a flapper design, originally developed for military jet engine turbines, that swings completely out of the fluid's flow path, adding virtually no flow restriction. These check valves were further optimized for low restriction at high flow rates using flow simulation software—and were designed to exceed most military specification requirements. The valves have been tested at up to 1,000 psi of backflow holding pressure without catastrophic failures or excessive leakage. This allows Improved Racing to very safely rate these valves to hold 300 psi of backflow pressure under normal operating conditions with a very high factor of safety. For comparison, the military surplus flapper check valves tested failed catastrophically with complete pressure loss at less than 200 psi. This flapper-style valve has a very low cracking pressure of less than 0.05 psi. Every internal component (hinge, spring, hinge pin, and gasket core) is made from stainless steel to ensure long-lasting, reliable performance and compatibility with just about any fluid, including corrosive fluids. The check valve's gasket is made from FKM (Viton®) rubber bonded to a stainless steel core, giving it a high operating temperature of up to 302 degrees F. It's also highly chemical-resistant and compatible with all types of fuel. Improved Racing's check valves are available in multiple fitting sizes, and the inlet and outlet halves can be mixed and matched to create a completely custom valve. Features and specifications: * Flapper design allows for very high flow with low restriction * Design optimized using flow simulation software * FKM (Viton®) rubber seal * All stainless steel internal components for compatibility with a wide range of fluids * 6061-T6 billet aluminum body with black MIL-A-8625 Type II anodized finish * Laser marked with flow direction and hinge location per military specification * Maximum operating backflow holding pressure of 300 psi, burst backflow holding pressure of over 1,000 psi * Maximum unchecked (normal direction of flow) operating pressure of over 1,000 psi * -40 to 302 degrees F operating temperature rang * Lifetime Warranty
Not Yet Reviewed
$149.00
—
$159.00
On Sale
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride on the strip or street. Fragola Performance Systems offers high performance fuel line kits for the most popular carburetors. These premium fuel line kits consist of strong braided stainless steel lines and aerospace-quality aluminum fittings that are "bright-dipped" for corrosion resistance and lasting appeal. Fragola fuel line kits arrive completely assembled with a high-flow adapter and a special plugged cap with a provision for a fuel pressure gauge. These fuel line kits are designed with an easy system of detachment, allowing you to make quick jet changes at the track. Feed your power racer with American-made Fragola Performance Systems fuel line kits--you'll be glad you did.
( 31 )
$100.99
—
$121.99
CA offers power steering hose kits for a variety of 1960s and '70s era muscle cars. These replacements include high- and low-pressure rubber hoses, along with steel fittings. They're engineered to meet or exceed OEM specifications for fit and performance. Maintain your power steering system with high-quality hose kits from CA.
( 2 )
$174.99
Vintage Air offers SureFit reduced barrier modified hose kits that are designed for use with a complete Gen IV or Gen 5 SureFit system in vehicles without a stock engine compartment configuration and core support. The kits contains refrigerant hoses with pre-crimped reduced barrier beadlock fittings on one end, with the other end open to accommodate a custom installation. All necessary fittings, O-rings and mounting hardware are also included, along with detailed installation and crimping instructions.
( 3 )
$194.99
Russell street legal brake line kits will improve your braking performance for competition or everyday driving. Replacing spongy or brittle factory rubber brake lines with Russell hoses will reduce hose expansion for firmer, more responsive braking. These kits feature stainless steel braised hose with zinc-plated fittings—and are factory assembled for convenient bolt-on installation. The components meet strict DOT requirements for street-driven vehicles. Russell brake line kits are available for a wide range of specific domestic, import, truck, and SUV applications.
( 488 )
$111.95
—
$171.95
Vintage Air offers SureFit reduced barrier standard hose kits that are designed specifically for use with a complete Gen IV or Gen 5 SureFit system and the stock engine compartment configuration and core support for your vehicle. These reduced barrier standard hose kits contain refrigerant hoses with pre-crimped reduced barrier beadlock fittings, along with O-rings and any necessary mounting hardware. Be sure to look at the instructions included with your evaporator kit for hose routing and installation details.
Not Yet Reviewed
$194.99
For OE replacements of your Mustang brake hoses, Classic Tube offers several sizes to meet your application. Assembled and ready to go, these rubber brake hoses are an easy and correct fit for your muscle Mustang.
Not Yet Reviewed
$106.99
—
$125.99
Clearance
These Vintage Air standard refrigeration line kits feature barrier-type refrigerant line for use with HFC-134a or R-12 refrigerants. They include adequate hose to connect a complete system, all O-ring fittings, and crimp ferrules. Vintage Air standard refrigeration line kits are available with or without a drier, so you can get started on completing your air conditioning system.
( 52 )
$174.99
$122.50
The Right Stuff supplies vapor return fuel lines in a variety of sizes and finishes, including OE steel and stainless steel, to help you to restore you classic car's brake system. Select the return fuel line to fit your application.
( 3 )
$133.99
The Right Stuff offers you the best-fitting, most exact reproduction fuel lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines that double-flare lines with remarkable consistency. The Right Stuff front to rear fuel lines are available in OEM steel or stainless steel, as well as various diameters and configurations for direct-fit replacement on hundreds of vehicles.
( 160 )
$133.99
Classic Tube automatic transmission cooler lines are constructed from pre-bent steel, stainless steel, or aluminum tubing, or rubber lines. They are an ideal solution for replacing your old factory rusted or damaged lines. These lines are manufactured complete with fittings for a simple fix for your restoration needs.
( 94 )
$100.99
—
$105.99
Stromberg Big Bore 3x2 fuel lines plumb your carburetors with clean, classic looks and simple installation. Their 3-into-1 fuel lines use CNC-bent 5/16 in. 304 stainless steel lines with leak-free "invisible" furnace-brazed joints. The fuel block sits down close to the manifold, matching the 4 degree Chevy intake angle to align visually with the valve covers. And then, for maximum versatility, the lines have 1/4 NPT threads at both ends with machined 11/16 in. AF flats—so fittings can be tightened safely without damaging the line. Carburetor spacing is set at 5 1/2 in., and the fuel lines are supplied ready to install with special Ford nut compression fittings. The lines are available natural or beautifully polished. Feed your fuel system with the performance and style of Stromberg Big Bore 3x2 fuel lines.
( 3 )
$149.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
