Availability
Showing In Stock Items. Show All 19 Items.
Trans-Dapt Performance crossmembers eliminate the need to fabricate a rear crossmember. Their vehicle-specific transmission crossmembers are available as kits, with braces and mounting pads, or as the crossmember alone. Position your engine and transmission properly and exactly where you need them with quality, durable crossmembers from Trans-Dapt.
( 111 )
$129.99
UMI Performance torque arm relocation kits are designed to remove the front mounting point of the torque arm off of the transmission and protect the tailshaft from damage. General Motors' tailshaft mounted design works great for a stock-driven vehicle; however, it is not designed to take abuse and hard launches. UMI Performance torque arm relocation kits replace your transmission crossmember with a new, stronger setup with a built-in torque arm mount. Each relocation kit is designed to fit a specific transmission and will work with virtually any stock-style aftermarket torque arm, as well as with the factory torque arm. These units are built using rectangular mild steel tubing and 0.188 in. mild steel mounting plates and they include all hardware needed for installation. The torque arm mount is machined from 0.250 in. thick mild steel and features a new clamshell for appropriately attaching the torque arm to the new crossmember.
( 39 )
$269.99
Clearance
When swapping out the engine in your hot rod, you need motor mounts and inserts that you can count on. Trans-Dapt has done all of the work for you in making these engine swap motor mounts. The units are available for a variety of mounting styles, and they're made with quality materials, such as rubber, steel, and polyurethane. These motor mounts are designed for specific vehicle and/or engine applications, so you can be assured of a perfect fit and great performance.
( 347 )
$197.99
Eliminate the hassle of fabricating a rear crossmember, and position your engine and transmission where you want them, with Trans-Dapt Performance universal transmission mounts. They'll support most standard and automatic transmissions with open channel frames and widths of 26 in. to 36 in. between the frame rails. With 0.114 in. wall thickness, they're available with no drop, 3 in., and 6 in. drops, either as kits with braces and mounting pads or as the crossmember alone.
( 48 )
$169.99
—
$204.99
QA1 offers replacement torque arm crossmembers for a variety of suspension conversion systems and vehicle applications. These tubular-style rear crossmembers are machined from steel with a black powdercoat finish. Hardware is included. Order the model recommended for your setup.
Not Yet Reviewed
$249.95
QA1 transmission crossmembers provide an easy bolt-in option to simplify a transmission swap and even give you more space for your performance exhaust. When swapping a GM engine into a Mustang, for instance, GM transmission crossmembers are required to bolt in the transmission. Unless otherwise noted, a polyurethane transmission mount and mounting hardware are included. Order the model designed to fit your application.
( 2 )
$264.95
UMI Performance transmission crossmembers are designed for late model F-bodies. These crossmembers are built using 0.120 in. rectangular tubing, 0.188 in. mild steel mounting plates, and a 0.375 in. thick transmission mount. These crossmembers are powdercoated bright red or gloss black and include new mounting hardware.
( 5 )
$129.99
ICT Billet motor mount adapters are beautiful engine swap brackets. They are manufactured from aerospace grade billet aluminum, they offer adjustable mounting positions, from stock bellhousing location to 2.25 in. forward. Each kit will include plates and bolts. Mount your swap securely with the strength and style of ICT Billet motor mount adapters.
( 93 )
$217.99
Summit Racing™ adjustable transmission mounts replace your stock transmission mount and give you the adjustability you need when swapping transmissions. They adjust up to 2.5 in. of offset, helping you reach your crossmember mounting holes. These mounts allow for adjustability in either direction, as needed, and eliminate all the hassles of miss-alignment, saving you time and money. Made from sturdy 3/16 in. thick steel and powdercoated for rust and corrosion resistance, these adjustable transmission mounts are an excellent choice for any project utilizing an engine or transmission swap.
( 28 )
$107.99
Reduce vibration and extend the life of your engine's components and accessories with Advance Adapters top-quality, proven-design motor mounts. For some of the bases that require welding, a temporary bolt-on solution allows you to drive your vehicle to the welding shop of your choice. Select the Advance Adapters engine swap motor mounts designed for your vehicle application.
( 124 )
$182.46
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$352.95
$183.95
—
$194.95
Summit Racing™ steel transmission crossmembers allow you to run a true dual-exhaust system with most popular GM transmissions. They have a patented double-hump design, so you don't have to compromise ground clearance by running pipes under the crossmember, and they're a complete bolt-on deal—no custom fabricating or realignment is needed. The parts are made from 1/8 in. thick boxed tubing to handle the frame-twisting power of big blocks. Order the crossmember recommended for your vehicle and transmission application.
( 585 )
$115.99
—
$213.99
BMR torque arm relocation kits allow you to move the torque arm mount to reduce the stress on the tailshaft. These kits replace your transmission crossmember with a stronger tubular piece that also has an integrated torque arm mount. The mount itself is adjustable up and down to allow for easy "instant center" adjustment. They are made from heavy-wall DOM tubing and 1/4 in. mounting plates and hardware are also included.
( 17 )
$259.95
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$379.95
—
$380.95
$208.95
—
$247.95
Hooker torque arm brackets are CAD-designed for direct compatibility with Hooker 71222002HKR and 71222001HKR transmission crossmembers. They provide the stock location and adjustable divorced anchorage of the stock torque arm when used with either of the Hooker 4th Gen F-body crossmembers. They feature a semi-gloss black powdercoated finish and a bolt-on installation.
( 1 )
$122.95
Rubber transmission mounts have been used for absorbing impacts for years, but they allow for a decent amount of movement. Hinson Motorsports transmission mounts use an interlocking stainless steel design with urethane poured throughout--providing sufficient cushion with much less give for hard use. They are designed for both street and track use and are direct replacements for stock units. Slamming through gears can be tough when the transmission mounts have a lot of give. Keep important components tight with Hinson Motorsports transmission mounts .
( 12 )
$176.00
American Powertrain X-Factor crossmembers offer half the weight of traditional crossmembers—with all of the strength. Designed to fit with most muscle car platforms and the latest transmissions, X-Factor aluminum crossmembers are 1,000 hp strong and feature a powdercoat finish for added durability. They're available for a variety of vehicle and transmission applications.
( 34 )
$249.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
