Availability
Centric Fleet Performance brake pads are specifically engineered to perform in pursuit, rescue, and emergency driving conditions. They can safely stop vehicles from high speeds and will continue to work at very high temperatures. These pads are manufactured with the same positive molding process used by OE suppliers--extreme pressure to compress the friction material and bond it to the backing plate. This process assures consistent friction material density throughout the pads, resulting in even wear and performance characteristics during the life of the brake pad. Centric Fleet Performance brake pads are also scorched; this additional process forces any impurities out of the friction material and pre-burnishes the pads to greatly accelerate the break-in process.
( 1 )
$147.99
For years, engine builders have been pushing motors to the limits of their ability, and Hawk Performance continues to get one step closer to the ABS Rev Limiter. The goal of these High Performance Street 5.0 brake pads is to offer the greatest stopping power and pedal feel for your vehicle without compromising your ABS. Too much brake torque, and your ABS goes into ICE mode; too little, and there is no improvement to the product. Pedal feedback, noise, brake torque, and dust control are the goals of these pads. They feature a Ferro-carbon compound that provides advanced braking characteristics to enhance the driving experience. This new compound combines the safety and quality of aerospace design, partnered with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics. Order the set designed for fitment on your make and model.
( 22 )
$120.59
—
$179.99
These HT 10 racing brake pads from Hawk Performance feature a high-torque compound with a smooth initial bite. These pads offer excellent modulation, consistent pedal, and good release characteristics.
( 5 )
$203.39
Hawk Performance's DTC 60 brake pads feature high torque with less initial bite than their DTC 70 pads. Featuring superior release and torque control characteristics, the pad compound is designed for cars with high deceleration rates with or without downforce. This model is recommended for use with DTC 70 when split friction between front and rear axle is desired. Order the universal or application-specific replacement pad set designed for your caliper type.
( 17 )
$198.89
—
$255.59
Hawk Performance HPS brake pads are designed to ensure performance, safety, and quality on the street. Their special HPS compound provides advanced braking characteristics to enhance your driving experience. Now you can enjoy the safety and quality of aerospace design—with the braking technology of motorsports. Order the set recommended for fitment on your make and model. Features include: * Extremely low dust * High friction/torque, hot or cold * Gentle on the rotor * Virtually noise-free * Greatly improved braking over OE * Extended pad life
( 142 )
$111.70
—
$170.09
StopTech Sport brake pads have the friction formula to optimize your brake system's performance and reliability. They are constructed from Para-aramid composites to provide linear response, regardless of pad temperature. Plus, the low-dust formulation is rotor-friendly and leaves your wheels cleaner! They're 100 percent positive-molded for uniform friction material density, scorched to raise initial cold effectiveness and ease bed-in, and they are asbestos-free. Hundreds of models are available for fitment on specific vehicle applications. Ensure proper stopping performance with StopTech Sport brake pads. Additional notes: * High MOT to eliminate fade * Excellent actuation, modulation, and release * Dyno-proven performance and service life * Lab-developed formulas with strong initial bite * Ideal for autocross and light track day use
( 20 )
$108.25
Due to the dramatic friction levels necessary to achieve "race-level" braking, your rotor wear, noise, dust, and pad wear may be increased—meaning, you need brake pads that stand up to the challenging environment. Hawk Performance HP Plus compound brake pads can take the heat at the track and get you home safely, without your having to change your brake pads in and out. They feature high-temperature resistance and are designed for the serious street and autocross enthusiast. Order the set designed for fitment on your make and model.
( 62 )
$172.79
—
$202.49
Hawk Performance ceramic brake pads are built with a premium, high performance, ultra-low dust, low-noise compound. They're engineered to reduce brake NVH (noise, vibration, and harshness), creating a quieter performing brake pad. Furthermore, the ceramic brake pad formula has a linear friction profile that allows your ABS brake system to work more effectively. With Performance Ceramic, you can expect reduced brake pad wear, lower dust output levels, and rotor-friendly brake pads. Order the set designed for fitment on your make and model. Key features include: * Increased stopping power * Increased rotor life * Extended pad life * Ultra-low dust * Extremely quiet * Stable friction output
( 79 )
$125.99
—
$182.69
DBA Street Series T2 disc brake rotors are excellent upgrades for your daily driver or long hauler. These brake rotors feature many advances over your stock brake rotors. Their patented Kangaroo Paw ventilation design provides excellent heat dissipation without warping or damaging the rotor. Meanwhile, their bi-symmetrical T2 curved slots help dampen vibrations and noise, while promoting even pad wear and minimizing glazing of the pad surface—giving you consistent brake feel. DBA adds a protective black paint to all non-friction areas to keep these rotors looking great, even when at the mercy of the elements. Upgrade to DBA Street Series T2 disc brake rotors for your next brake job.
( 7 )
$198.26
If you've stepped beyond the ability of your stock brakes, then DBA HD Series 4000XS brake rotors are perfect for you. These rotors contain many of the features that make DBA brake rotors so great. Their patented Kangaroo Paw ventilation, XG150 iron alloy, and TSP process work together to allow these rotors to handle high-heat situations. Their non-directional, XS cross-drilled, slot design eliminates the need for different left and right discs and provides a consistent, strong brake feel. To top off these awesome rotors, DBA applies a protective paint to all non-friction surfaces and adds heat marks so you can monitor your peak brake heat. Have more confidence in your brakes with these DBA HD Series 4000XS brake rotors, available to fit a variety of specific applications.
( 7 )
$263.12
Get the braking ability that you need with these Hawk Performance Blue 9012 racing brake pads. They feature a medium/high-torque brake compound. They offer low pad and rotor wear with good brake modulation and are ideal for road racing and Rally applications where low-to-mid temperature effectiveness is critical.
( 45 )
$166.49
EBC heavy-duty Greenstuff Elite organic brake pads present an excellent solution for 4x4 use, offering the benefit of longer life and better resistance to off-road conditions like dust, sand, etc. They're ideal as upgrades for your SUV or light truck with an improved brake effect of 10+ percent. Made from a high-temperature, stable material, EBC's Greenstuff Elite pads feature Nucap NRS hooks on the back plates to eliminate the chance of pad debond. Additional features and benefits: * Medium dusting factor makes these cleaner pads than stock * Capable of repeated heavy brake use without brake "fall-off" * Very minimal disc/rotor damage characteristics * Superb brake control and pedal response full grade are better than stock * Features red "brake in" surface coating for instant safe braking after install
( 154 )
$110.38
PowerStop Autospecialty OE replacement brake calipers bolt directly in place of the stock calipers. The calipers and the brackets are remanufactured, and the calipers are 100 percent pressure-tested to verify piston operation as well as to prevent any possible leaks from occurring. Every caliper is expertly assembled using new seals, slide pins (where applicable), dust boots, bleeder screws, and stainless-steel brake pad abutment clips, then inspected for overall quality and safety. High-temperature EPDM rubber dust boots and premium silicone lubricant are used for smoother operation and extended life in extreme conditions. PowerStop Autospecialty OE replacement brake calipers are perfect for the budget conscious-consumer looking for quality stock replacements.
( 35 )
$192.99
—
$194.96
Raybestos Specialty truck, school bus, and medium-duty brake pads provide superior brake performance for Class 1 through Class 8 trucks and medium-duty vehicles. For safe, long-wearing disc brake pads made with superior friction compounds, why would you look anywhere else? Keep your drivers safe and your fleet on the road by choosing Raybestos Specialty truck, school bus, and medium-duty specialty brake pads. Developed for every day, heavy-use situations, Raybestos truck, school bus, and and medium-duty line of friction features: * Heavy-duty, application-specific materials * Designs and formulations that conform to OE fit, form, and function * Low-fade braking for optimum safety * Heavy-duty performance with low dust * Quiet operation in extreme situations * All-weather stopping performance * Rubber-coated, stainless steel brake hardware
( 1 )
$117.99
—
$123.99
Clearance
Centric Brakes can save you the hassle of tracking down a laundry list of replacement parts! Their extensive line of OE-style loaded calipers arrives with application-specific Posi Quiet brake pads already installed. These top-quality units are designed, assembled, and tested to meet or exceed the performance of your factory calipers. Depending on your application, the calipers are available in various materials and finishes. Other new components included are: guide bolts, pins, through-bolts, seals, O-rings, boots, dust seals, and abutment clips. For quiet, effective braking that's also easy on the pocketbook, order the Centric loaded brake calipers tailored for fitment on your vehicle.
( 3 )
$112.99
Centric Premium brake master cylinders offer a secure, leak-free fit to promote proper brake control. Manufactured under the highest quality standards by OE suppliers, these units match original equipment parts in quality, configuration, and fitment. They are complete with reservoirs, switches, and floats, as well as the original casting body designs where applicable. Order the model designed for your vehicle application. Features include: * Manufactured to meet strict OE specifications * Heavy-duty construction (cast iron or aluminum) * Hassle-free installation * Carefully evaluated to ensure OE quality * Available for various domestic and import vehicles
( 45 )
$198.99
StopTech drilled and slotted Cryo brake rotors fit like stock but their performance and appeal goes miles beyond. They perfectly balance the benefits of both drilled and slotted-style rotors to deliver lightweight performance, smooth braking, and shorter stopping distances with the advantages of a cryogenically treated rotor that resist warping and excessive wear. StopTech Cryo rotors are manufactured from high-quality blank castings, CNC-machined, cryogenically treated and then most are finished with a black E-coating to hold on to their performance and remain great looking. StopTech drilled and slotted Cryo brake rotors--cooler control for your ride!
( 6 )
$207.71
Centric Preferred axle packs deliver pre-selected components perfectly matched for assured fit and performance. Preferred packs are for drivers who seek premium direct-replacement parts that offer low-dust and low-noise, with improved service life and braking performance. These axle packs may contain Centric's Premium black or high-carbon alloy rotors, along with Posi-Quiet premium pads. Order the assembly designed to fit your vehicle application.
( 10 )
$139.99
Centric OE Disc Brake Plus Packs provide better stopping performance over the factory brake system, as well as excellent value. They combine the top-selling premium Posi-Quiet brake pads with industry-proven C-TEK brake rotors. Posi-Quiet pads deliver the longest life with super quiet stopping performance while keeping your wheels clean. C-TEK rotors are machined and double disc ground to precise specifications, essential to restoring like-new performance. This combo solution delivers clean, smooth, and quiet performance—it's a one-step upgrade to your vehicle's OE system. The kits are available in different sizes; order the model recommended for your application.
Not Yet Reviewed
$209.99
ACDelco Gold semi-metallic brake pads are formulated with steel strands to provide strength, and to conduct heat away from the rotor's surface, while offering premium braking power. These high-quality replacements are ideal for many vehicles on the road today. Noise-dampening shims are included (where applicable), and no curing is required. Brakes are one area in which you simply cannot compromise. ACDelco Gold semi-metallic brake pads deliver the fit and performance you expect, along with peace of mind. Order the set recommended for your vehicle.
( 10 )
$145.99
—
$175.99
StopTech drilled and slotted brake rotors are engineered to look good and perform at the same time! These StopTech rotors perfectly balance the benefits of both drilled and slotted-style rotors to deliver lightweight performance, smooth braking, and shorter stopping distances--even on wet roads. And, of course, they look awesome behind your open wheels! These rotors are manufactured from high-quality blank castings, CNC-machined, and then most are finished with a black E-coating to hold on to their performance and remain great looking. They fit like stock but their performance and appeal goes miles beyond. StopTech drilled and slotted brake rotors--cooler control for your ride!
( 44 )
$143.23
—
$183.93
StopTech slotted brake rotors offer efficient, smooth and longer lasting stopping power. These one-piece performance upgrades are cast from a unique power alloy--chromium and iron--and mill-balanced. They are then CNC-machined and most are given a durable black E-coating applied to the non-friction areas of the rotors to prevent unsightly corrosion for a lasting, sporty appeal. Add bite and improved wet and dry braking performance; step up to StopTech slotted brake rotors and give your braking a boost.
( 53 )
$130.39
—
$137.57
Centric Select axle packs are direct-fit brake pad and rotor pairings that simplify servicing your brakes. These application-specific, pre-matched kits take the guesswork out of choosing what will work best together on your vehicle. Select kits are for drivers who want a simple solution for dependable, direct-fit replacement parts. These Centric axle packs include high-quality replacement rotors and Centric Premium street pads.
( 15 )
$202.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
