Availability
On Sale
Trail-Gear high-pressure power steering hose kits are great for your custom-length setups. The hoses are made from black oil-resistant high-temperature NBR rubber that's reinforced with high-tensile steel wire over a polyester braid. The outer coverings are neoprene-impregnated oil-resistant polyester braid. Features and kit contents include: * No. 6 SAE 100R5/SAE J1402 high-pressure power steering hose * Rated working pressure of 2,250 psi * Minimum bursting pressure of 9,000 psi * Suitable for use in temperatures of -40 degrees F to +275 degrees F * 120 in. of No. 6 high-pressure hose, two straight No. 6 JIC fittings, and two 90 degree No. 6 JIC fittings
( 11 )
$119.99
$101.99
On Sale
Has it been a while since you serviced your knuckles? Trail-Gear knuckle rebuild kits contain all standard replacement parts, including gaskets, felts, seals, washers, and shims to do the job done right. They even include outer felt covers--a Trail-Gear exclusive! If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Kits are offered with or without wheel bearings. Service your knuckles with Trail-Gear knuckle rebuild kits.
( 4 )
$149.99
—
$199.99
$127.49
—
$169.99
On Sale
Trail-Gear FJ-80 knuckle rebuild kits are available with or without wheel bearings. The kits contain all of the replacement parts you need to service your steering knuckles. Trail-Gear FJ80 knuckle kits will service both left and right knuckles. Trail-Gear FJ-80 knuckle rebuild kits typically include: * Gaskets, felts, seals, washers and shims * Inner axle seals and outer felt covers
( 5 )
$129.99
—
$199.99
$110.49
—
$169.99
On Sale
When installing a SAS kit on your Tacoma, the rack and pinion must be removed and replaced, usually with an 1986-95 Toyota IFS power steering box. Trail-Gear has developed a power steering hose conversion kit that will allow you to remove your rack and pinion and install an IFS box in its place. Trail-Gear power steering hose conversion kits come with all the necessary hoses, clamps, and fittings to get the job done right. Choose the proper kit for your vehicle.
Not Yet Reviewed
$159.99
$135.99
On Sale
Clearance is the key word for off-road enthusiasts. Navigating rocks and rugged terrain leaves your thin steering mechanism vulnerable to damage--which makes Trail-Gear high steer arms invaluable to your vehicle. These pressure-forged steel brackets provide solid mounting points to raise your pitman arm and steering rods a few more inches off the ground. This additional height can mean the difference between safe adventures … or a bent and useless steering component. Trail-Gear steer arms feature tapered tie rod holes for secure contact between parts, and they compensate for angles so your rod ends can ride at the OE-standard 90 degrees. For trucks, 4Runners, Land Cruisers, and other solid front axle rides, TG high steer arms are essential equipment when you venture off the beaten path.
( 3 )
$299.99
$254.99
On Sale
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
Not Yet Reviewed
$299.99
$254.99
On Sale
Trail-Gear Rock Assault 9 steering arms are CNC-machined from 1018 billet steel, and are 1 1/4 in. thick with a keyway design for added engagement. Plus, they come with a 3/4 in. hole and room for additional holes to get the perfect steering setup! Rock Assault 9 steering arms feature an angled design that moves the tie rod mounting holes closer to the center of the vehicle, allowing wheels with a higher backspacing to be used. Match up your Rock Assault 9 knuckles with these Trail-Gear steering arms--and get ready to scale boulders!
Not Yet Reviewed
$199.99
$173.99
On Sale
Don't be stranded with busted knuckles when you're riding the trails. Keep your steering knuckles in top condition with Trail-Gear knuckle sandwich kits. These kits are an assembly of five separate TGI kits for regular drivetrain maintenance. You can save time and money by staying in top operating condition with regular servicing of your system--wheel bearings, seals, backing plate eliminators, etc.
( 2 )
$199.99
$169.99
On Sale
Trail-Gear single-ended hydro assist rams are offered in many sizes to cover a full spectrum of applications. TG's single-ended ram models are available in 6 in. and 8 in. stroke versions with high-temperature inner and outer seals for high-performing longevity. Trail-Gear 1 1/2 in. and 2 in. bore rams have a 3/4 in. diameter rod that will accept a 3/4 in. female rod end. The 2 1/4 in. bore rams have a 1 1/8 in. diameter rod with a 3/4 in.-16 pitch threaded hole in its end to accept 3/4 in.-16 threaded male rod ends. Experience the benefits of hydro assisted steering with Trail-Gear single-ended hydro assist rams. Rod-ends for these rams are sold separately.
Not Yet Reviewed
$249.99
$212.49
On Sale
Trail-Gear keeps your rig rolling over the toughest trails with their Rock Assault double-ended rams. The replacements offer the same strength as those in the kits. The cylinders are black zinc plated, while the 4340 chromoly rod has 3/4 in. x 16 female threads on each end. They are available in 6 in., 8 in., and 10 in. strokes and are designed with a piston wear band and rod bushing.
Not Yet Reviewed
$299.99
$254.99
On Sale
Trail-Gear Trail Safe wiper seals keep your knuckle balls cleaner, ride after ride. How? With engineering innovation! Each of these knuckle ball wiper seals feature a double-sided design—with a grease seal lip and a wiper seal lip that efficiently keep the dirt out and the grease in. They're constructed in one-piece of high-grade polyurethane, not UHMW, which means they're more durable and pliable for easier installation and a lifetime of dependability. Tired of wiping the clumps of dirty, sandy grease off your knuckle balls? Toss the factory felt and rubber … and replace them with innovative Trail-Gear Trail Safe wiper seals. Your kit includes: * Trail Safe knuckle ball seal wipers * Rock ring kit * Rock ring bolts * M6 lock washers
( 1 )
$119.99
$101.99
On Sale
Trail-Gear Super Metal knuckle stud kits are stronger and longer than stock! Constructed from a proprietary metal made exclusively for Trail Gear, these studs are manufactured to strict specifications to be 1/4 in. longer than stock and feature integrated 8mm hex heads for easy removal. Repair or upgrade your high-steer system with the great strength of Trail-Gear Super Metal knuckle stud kits.
( 5 )
$159.99
$135.99
On Sale
Trail-Gear pitman arms are designed from solid forged steel construction, and are ideal for use with crossover steering. Replacing your pitman arm is recommended if the original is worn-out or, in most cases, if your steering box is being changed out. These strong, extra-wide one-piece arms will allow the use of FJ80 tie rod ends. They're available in flat style or with the same drop as the factory pitman arm.
( 1 )
$129.99
$110.49
On Sale
Trail-Gear specializes in steering, suspension, driveshafts, axles, trail armor, and wheels. Their wheel bearing kits are a part of the outstanding line of off-road parts for your truck, Jeep, or SUV. Each kit services a single side and includes inner and outer bearings, hub gaskets, an inner wheel bearing seal, and a star lockwasher. Rugged terrain can be hard on your bearings; these full-service kits bring all of the necessary parts together for replacement.
( 9 )
$199.99
$169.99
On Sale
Trail-Gear lower knuckle caps, also known as lower kingpin caps, are critical components in a vehicle's suspension system. The lower knuckle caps primarily offers the benefit of added protection and support to the lower portion of the steering knuckle, by preventing wear and tear from debris and impact, and potentially extending the life of the knuckle and improving overall handling stability. It's crucial to ensure the lower knuckle caps are designed specifically for the vehicle model and fits securely to provide the intended protection. Regular inspection of the caps is recommended to check for signs of damage or wear and replace it if necessary. If you are looking to upgrade your drivetrain, Trail-Gear has the service parts and upgrades to make your off-road machine perform better than the competition. Knuckle caps are sold as a pair. Key benefits and features of lower knuckle caps: * Designed to fit on the bottom of 1979-1985 Toyota solid axle trucks and 4Runners, as well as 1980-1990 FJ60/FJ62 Land Cruiser's * Reduced wear and tear: The cap acts as a barrier, shielding the vulnerable lower part of the knuckle from dirt, rocks, and other road debris that could cause damage over time * Improved longevity: By minimizing wear on the knuckle, the cap can potentially extend the lifespan of this important suspension component, reducing the need for replacements * Enhanced handling stability: A well-maintained knuckle with a lower cap can contribute to smoother steering response and improved handling, especially on rough terrains. * Protection against impact damage: In the event of a minor impact, the cap can absorb some of the force, potentially preventing more serious damage to the knuckle
Not Yet Reviewed
$119.99
$101.99
On Sale
Heavy-duty Trail Gear drag links feature 1.25 in. x 0.250 in. wall DOM tubing, precision tapping, left side thread marks, and a durable finish. They provide compensation for the longer-than-stock Rock Assault front axle housings paired with Hi-Steer kits. Trail Gear offers their Rock Assault drag links in different lengths, so make sure you order the size best suited for your application.
Not Yet Reviewed
$129.99
$110.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
