Availability
Summit Racing™ LS Series retrofit trunnion kits are the answer for LS engines with higher lift camshafts and heavier-than-stock valve springs. These trunnion bushing kits are designed to maximize peace of mind by completely eliminating the needle bearings and providing maximum lubrication to the trunnion—while also providing maximum load carrying capabilities many times greater than needle bearings. Rocker arm trunnion upgrade kits include: * 16 micro polished hardened steel pivots/trunnions * 32 high performance C932 bearing bronze bushings * 32 retainer clips
( 70 )
$179.99
Summit Racing™ V-belt pulley kits make an ideal replacement as a standard ratio pulley kit for worn stock parts. They're available in a choice of chrome plated or black painted finish—and include crankshaft pulley, water pump pulley, power steering pulley, alternator pulley, the brackets, and hardware. Order the kit designed for your vehicle and engine application.
( 127 )
$131.99
—
$147.99
On average, transmissions last between 30,000 to 50,000 miles before requiring maintenance. When that milestone occurs, Summit Racing™ offers automatic transmission rebuild kits for more than a dozen transmission models spanning a half-century. The kits include all-new clutches, oil seals, gaskets, lip seals, and a transmission filter. These rebuild components are an economical way to restore performance. Order the kit recommended for your application.
( 34 )
$155.99
—
$243.99
These Summit Racing™ premium battery relocation kits give your battery extra protection from moisture, dirt, and debris. The sealed battery boxes reduce underhood clutter and are available in red or black finishes. Each kit contains 20 ft. of positive battery cable, 3 ft. of negative battery cable, plus all battery terminals and mounting hardware.
( 91 )
$214.98
You spend a lot of time inside your car. Overhaul the appearance of your interior by replacing worn, stained, or ripped factory carpet with a Summit Racing™ custom-fit molded carpet kit. Each kit is cut and tailored to your specific vehicle, making installation easy and avoiding extensive trimming. Summit Racing™ has partnered with the premier manufacturer of automotive carpeting to offer these kits in your choice of molded vinyl, cut pile, or nylon loop. They're available in popular factory colors to help you choose the look and feel desired. Whether it's your daily driver or a 100-point restoration, Summit Racing™ custom-fit molded carpet kits have you covered.
( 157 )
$129.99
—
$249.99
As your number-one source for high performance, it only seems right to offer you these re-ring kits. They feature Summit Racing™ brand components matched for optimal performance by our tech experts, so you can get the rebuild components that you need without taking the time to do all of the research. These convenient, affordable kits are designed to work with standard or oversize pistons and standard or undersize bearings.
( 41 )
$131.96
—
$134.96
Summit Racing™ cam degreeing kits let you dial-in your cam and check piston-to-valve clearance with accuracy. You can use them to check flywheel runout, crankshaft endplay, and ring gear backlash, too. The kits include two low-tension checking springs, one wire pointer, one TDC stop, one 11 in. degree wheel, three adapter bushings, one flat washer, one magnetic base, one dial indicator, and one carrying case.
( 64 )
$116.99
Summit Racing™ offers engine oil change kits for hundreds of foreign and domestic vehicles. The combo kits include 5 to 10 quarts (depending on selection) of a Mobil Advanced full-synthetic motor oil, the official blend of NASCAR. It protects your engine for up to 10,000 miles. Each kit also includes an oil filter. Maintain your late model car, truck, van, or Jeep with a complete lubrication solution from Summit Racing™.
( 18 )
$103.67
—
$127.89
Summit Racing™ high performance automatic transmission rebuild kits feature the necessary parts to get your transmission working more efficiently than ever. Available for a variety of transmissions, the Summit Racing™ high performance automatic transmission rebuild kits are an excellent choice for increased durability and performance. Kits include: * Alto Red clutches * Kolene coated or Premium Steels * High performance band * High performance transmission filter * Bushing kit * Oil seals * Gaskets * Lip seals
( 64 )
$224.99
—
$246.99
Summit Racing™ manual transmission rebuild kits and components give you what you need to get that gearbox working properly and going down the road. Our rebuild kits give you all the bearings, Synchro rings, and gaskets for a full rebuild. Select the kit needed for your vehicle's transmission.
Not Yet Reviewed
$179.99
Summit Racing™ offers Moog front end steering kits to help resolve your suspension and steering problems. The components in these kits have been matched to not only save you time and money in selecting the right parts, but also to improve your vehicle's dynamics and ride performance. Your chosen kit may include Moog ball joints, tie rods, tie rod ends, or tie rod adjusting sleeves—all providing long-lasting dependability and like-new steering, with ease of installation. Whether your vehicle of choice is a Chevy, Ford, or Mopar, rest assured there's a Moog front end steering kit for you.
( 2 )
$233.94
—
$241.90
Have a fuel delivery dilemma? Our Summit Racing™ fuel line combination kits can help. They're available in more than a dozen packages, containing fuel line, fittings, hose ends, and assorted accessories needed for easy repair or maintenance. Choose the options that best suit your application: fuel line length and diameter; start and finish plumbing locations; with or without clamps, and more.
( 85 )
$102.88
—
$171.93
Summit Racing™ offers clutch kits to fit thousands of vehicle applications. These stock-style replacements are engineered to OE design and performance standards. They will work in tandem with your transmission to deliver smooth gear shifts and an enjoyable ride. Besides the quality product, Summit Racing™ clutch kits present a fantastic value. Order the model recommended for your car, truck, Jeep, or SUV.
( 95 )
$122.99
—
$206.99
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 13 )
$167.99
Here's a simple high performance solution! These quality Summit Racing cam kits contain a straight-grind, hydraulic flat tappet camshaft along with the matching lifters. The tight lobe separation will boost your torque, throttle response, and mid range power for exciting action at the track and on the road.
( 175 )
$245.68
Summit Racing™ direct-fit engine run stand gauge kits will make a great addition to your existing Summit Racing™ engine run stand. These kits include one each: oil pressure gauge, water temperature gauge, tachometer gauge, and voltage gauge. Each digital gauge is designed with a black faceplate with red numbers and chrome bezels. For diagnostic work, engine maintenance or prep, Summit Racing™ gauge kits will provide you with important data prior to installation.
( 3 )
$203.99
Revitalize your small block Chevy's ignition with our Summit Racing™ ignition kits. These packages includes a Summit blueprinted HEI distributor with a powerful 50,000V coil, a high-output 5.7 amp module for precise timing, and a hardened iron drive gear suitable for use with a flat tappet camshaft. Plus, a set of custom-fit Summit 8mm ignition wires, which have a spiral-wound 270 ohm/ft. conductor around an aramid fiber core, blue silicone outer jackets, and stainless steel and brass terminals.
( 18 )
$150.98
Summit Racing™ offers LS Serpentine bracket kits for a wide range of Chevrolet vehicles from 1997 and up. The kits include power steering, alternator, and idler brackets—all CNC laser-cut from 6061 aircraft grade billet aluminum and protected with an anodized finish. These engine accessory kits must be used with a GM LS truck-style balancer, alternator, water pump, and power steering pump. Summit Racing™ recommends using an 84 in., 6-rib serpentine belt.
( 3 )
$100.99
Go all-out racing with Summit Racing™ Circle Track camshaft kits. Built for racers, these camshaft kits will fit right in to complete your small block Chevy's engine package for full race applications. And Summit Racing™ makes these Circle Track kits affordable. Our camshafts offer American craftsmanship precisely machined to maximize midrange power, torque, and throttle response. Plus, the kits match your cam with a set of flat tappet solid lifters and are available with varying attributes to meet your applications. Circle Track camshaft kits from Summit Racing™ help to make your racer and your wallet winners!
( 16 )
$226.78
—
$246.58
Summit Racing™ has just what you need for the fast installation of your ring and pinion and to keep you on budget. Our Basic kits contain differential bearings, front and rear pinion bearings, crush sleeves, pinion seals, marking compound, a brush, and a threadlocker. Get the key components to get the job done with Summit Racing™ Basic ring and pinion installation kits.
( 101 )
$106.99
—
$135.99
From low-end torque to top-end horsepower--and everything in between--one of our Summit Racing™ Classic cam kits has you covered. These power-building kits include a hydraulic camshaft, lifters, and assembly lube.
( 459 )
$229.48
—
$245.68
Whether you’re a master technician or you don’t know a distributor from a dipstick, the Visible V8 model kit puts engine building in the palm of your hand! Learn all about the inner workings of the V8 as you assemble the 314-piece kit, then turn the hand crank and watch as the crankshaft moves the connecting rods and pistons, and the camshaft operates the rocker arms and valves—just like the real deal! It also has details like a working fan and accessory pulleys, a distributor with plug wires, a carburetor topped with an air cleaner, and much more! The completed 1:4 scale model measures 12" long and looks great displayed on the included engine stand. Recommended for ages 12 and up (skill level 3), model cement required (not included).
( 19 )
$109.99
Summit Racing™ swing-out door bar kits will enable you to convert an existing side bar to a more convenient swing-out model—no more crawling over the bars to get into your race car! Once installed, these kits allow your door bar to conveniently swing-out of the way with the removal of a quick-release pin. The door bar kits are designed for mild steel tubing of different diameters. Release pin included. Welding required. Order the kit you need.
( 5 )
$136.99
Get more horsepower, better acceleration, and some extra cash in your pocket with a Summit Racing™ fuel injection performance kit. Most fuel injection performance kits feature a molded polyethylene intake tube that's designed to pull in more power-building cool air, and they come with a washable, reusable air filter that'll last the life of your vehicle. Best of all, Summit Racing™ fuel injection performance kits bolt on in place of your stock air box, so installation is easy.
( 51 )
$249.99
Modal Header