Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
JET Adjustable TBI Billet Fuel Pressure Regulators
These JET adjustable TBI billet fuel pressure regulators ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel supply--rely on Jet for your vehicle's fuel system needs.
( 13 )
$161.99
—
$201.99
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$174.99
—
$244.99
JET Carburetor Fuel Lines
JET carburetor fuel lines give your installation professional fit, function, and style. Made from top-grade stainless steel and hand-polished, they present your Holley or Holley-style carburetor with a custom look of high performance. The fuel lines include aluminum fittings anodized in your choice of several colors, as well as the fittings and gaskets for the carburetor bowls and a -6 AN inlet fitting. Make your engine bay look great with the addition of JET stainless steel carburetor fuel lines.
( 4 )
$107.99
—
$122.99
JET Stage 2 Computer Chips/Modules
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 112 )
$165.99
—
$197.99
JET Adjustable TPI Fuel Pressure Regulators
JET adjustable TPI fuel pressure regulators enable you to obtain maximum efficiency and horsepower gains in a tuned port injection system. Unlike other designs, these JET regulators incorporate a steel insert on the adjuster to avoid stripping. Convert your factory regulator to an adjustable-style TPI fuel pressure regulator for the performance you demand!
( 3 )
$161.99
JET Stage 1 Computer Chips/Modules
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$165.99
—
$197.99
JET Powr-Flo Throttle Body Spacers
These JET Powr-Flo throttle body spacers use aerospace engineering combined with years of experience. The exceptional design of the bore causes the incoming airflow to actually smooth out and speed up. This creates a type of compacted air-charge that enters through the throttle body and builds pressure in the combustion chamber. This will result in an extensive gain in the midrange power band and an overall increase in fuel economy.
( 70 )
$120.99
—
$169.99
JET Quadrajet Bushing Service Kits
JET quadrajet bushing service kits will restore your throttle valve assembly to better than new tolerances. Using the supplied bronze bushings, they eliminate common vacuum leak problems, inconsistent idle speeds, and binding or sticking throttle. The kits contain 16 bushings, 1 drill bit reamer, 4 retaining screws and an instruction sheet.
( 2 )
$116.99
JET Holley Bushing Service Kits
These JET Holley bushing service kits contain everything you need for smooth throttle operation. These service kits include 16 throttle shaft bushings, a reamer, and instructions.
( 4 )
$131.99
JET Powr-Shift Computer Chips/Modules
JET Powr-Shift performance chips/modules will improve the performance of your car, truck, or SUV, adding up to 23 hp instantly with simple, plug-and-play installation. These JET Performance chips provide exclusive, full range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno tested to ensure the most possible horsepower and drivability from each application. JET Powr-Shift chips combine features of a Stage 2 performance chip with a more aggressive transmission program. Choose the one compatible with your vehicle.
( 4 )
$227.99
JET Underdrive Pulley Kits
JET underdrive pulley sets reclaim lost horsepower and mileage by reducing the drag placed on the engine to drive the accessories, such as the air conditioning, power steering, and water pump. The pulleys slow down these accessories to allow the engine to turn with less effort without any adverse effect on the operation of A/C, power steering, charging, or cooling systems. Installation consists of simple bolt-on replacement of the stock pulleys. Kits include pulleys, hardware, complete instructions, and part number for new serpentine belt as most kits will require use of smaller size belt. Belt is not included with kit. The number and type of pulleys will vary per application.
( 12 )
$206.99
—
$218.99
JET Powr-Flo Inline Fuel Filters
JET Powr-Flo inline fuel filters are engineered to protect your fuel system in any application ranging from street to race and everything in between. JET designed these inline filters to have minimal pressure drop, while still providing the maximum filtration. The filters are machined billet aluminum with anodized finishes in a choice of colors and with either 10 micron cellulose or 100 micron stainless steel elements. JET Powr-Flo inline fuel filters can be used in both carbureted and fuel injected applications. Additional features and notes: * ORB-10 inlets to allow use of AN-10, -08, or -06 fuel lines (fittings sold separately) * O-ringed inlets provide a positive seal for high pressure applications * 10 micron filters (for finest filtration) are for use after the fuel pump * 100 micron filters (for larger particle filtration) are for use between the tank and the fuel pump * Easily replaceable elements and the stainless steel elements are cleanable
Not Yet Reviewed
$107.99
