Availability
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$102.95
—
$293.95
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$145.95
—
$283.95
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 84 )
$124.95
—
$160.95
COMP G2™ Valve Springs represent months of work by their engineering team to identify dated valve spring designs and bring them up to modern-day standards. COMP G2™ valve springs are using the same materials and manufacturing technologies demanded by today's race teams and modern engine platforms. These springs are a product of innovative design and superior craftsmanship using premium materials and precision manufacturing. Engineered with state-of-the-art techniques utilizing premium wire, they redefine reliability and consistency in the performance automotive aftermarket. Featured are single and dual valve springs, available as individuals or four, six, or eight-cylinder applications.
( 2 )
$115.95
—
$302.95
COMP Cams valve spring height micrometers are the quickest, easiest, and most accurate way to measure valve spring installed height. They install just like a valve spring and then the tool is expanded until it has fully seated the valve, locks, and retainer. By simulating the installation, they're able to read the measurement precisely.
( 33 )
$113.95
—
$128.95
You know what a chore it can be to remove high-pressure valve springs with shaft mounted rocker arms. Remove and install valve springs the safe and correct way with COMP Cams shaft mount valve spring compressors. They are designed to facilitate valve spring removal on heads with shaft mounted rockers while the cylinder heads are still on the engine.
( 24 )
$159.95
—
$231.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$110.95
—
$245.95
COMP Cams tool steel valve spring retainers are lightweight, high-strength, and have excellent wear characteristics. They're 30 percent stronger than conventional chromoly steel retainers and can withstand even the most demanding engine rpm ranges. Manufactured from high-grade tool steel, COMP Cams tool steel valve spring retainers are the right components to instantly add reliability to your valvetrain.
( 2 )
$123.95
—
$245.95
COMP Cams valve spring seat-cutting tools allow you to machine the cylinder head for the correct diameter valve spring. This will allow you to install larger springs and hardened spring seats. They will require the use of an arbor/pilot (sold separately).
( 34 )
$119.95
—
$130.95
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$125.95
—
$307.53
Ideal for serious racers, COMP Cams titanium valve spring retainers are stronger and lighter than steel. They're available in a wide range of sizes, styles, and quantities. The retainers work best with COMJP Cams valve locks and optional lash caps. Order the set best suited for your single, dual, or triple spring application.
( 10 )
$129.95
—
$263.95
Cut your own valve spring seats with these COMP Cams spring seat cutters. These seat cutters are made from tough carbide, so they can cut seat after seat without wearing out. They are available in a variety of configurations and sizes to precisely cut seats for various spring sizes, designs, and even aftermarket valve seats. Each tool utilizes interchangeable arbors to match your valve stem to keep everything square and true. Save time and money by cutting your own valve spring seats with these COMP Cams spring seat cutters.
Not Yet Reviewed
$155.95
COMP Cams cylinder head parts kits have been assembled with the finest premium components to provide your engine with optimal airflow for maximum engine performance. By providing all the required parts in one package, these kits can save you significant time during installation. Features include: * 21-4N stainless steel intake and exhaust valves * COMP Cams valve springs, retainers, and locks * Hardened rocker arm studs for use with roller rocker arms * Pushrod guideplates * Valve seals
Not Yet Reviewed
$197.95
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 128 )
$149.95
—
$282.16
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 454 )
$119.95
—
$200.95
COMP Cams performance lash adjusters provide more lift and duration while improving valvetrain stability. Lash adjusters in Ford Modular motors can leak down under high-rpm, causing lost duration and lift, as well as more valvetrain wear. COMP Cams adjusters are engineered to have a slower leak-down rate and better resist collapsing than stock models, providing more lift and duration when aggressive performance camshafts and heavy-duty valve springs are installed, as well as better valvetrain stability and high-rpm durability. They are finished with black oxide coating that prevents rust and corrosion while contributing to increased durability and life span. Lash adjusters are available individually or in sets for a variety of vehicles from the 1990s and up.
Not Yet Reviewed
$243.95
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$108.95
—
$279.95
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$232.95
—
$299.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 202 )
$249.95
—
$260.95
Get the measurements you need from those hard to reach spots. COMP Cams telescoping gauge sets will measure slots, grooves, recesses, cylinders, etc. And, they are especially useful for measuring valve spring installed height. Each set contains six gauges covering a total range of 5/16 in. to 6 in., all enclosed in a handy storage pouch.
( 1 )
$141.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$129.95
COMP Cams titanium 8 degree valve locks are designed for engines needed lightweight, durable valve locks. They are manufactured from titanium and offer superior valve spring location. The COMP Cams titanium 8 degree valve locks will require specific retainers and will not fit standard 7 or 10 degree retainers. Give your valvetrain an upgrade with these COMP Cams titanium 8 degree valve locks.
Not Yet Reviewed
$277.95
COMP Cams Street valve locks are stock replacement for stock engine rebuilds. They're stamped and hardened for superior wear resistance. Use these steel valve locks for street applications with standard valve spring loads. They're available in a variety of sizes, styles, and quantities.
( 42 )
$200.95
COMP Cams aluminum roller rocker arms are made from a high-quality alloy, anodized for durability and good looks. They have needle-bearing trunnions to allow for high valve spring loads (over 350 lbs.) and a tensile strength of 80,000 psi. While these rockers are more expensive than COMP Cams High Energy or Magnum rockers, they're a great choice for any race application.
Not Yet Reviewed
$104.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
