Availability
On Sale
These JET standard main carburetor jets are precision-manufactured to ensure accurate flow. They give you a consistent and predictable flow difference from each jet number. Available in different sizes, the JET standard main carburetor jets let you tune-in your carburetor to maintain optimum performance.
( 12 )
$11.21
$10.09
On Sale
Holley standard main jets are just what you need to fine-tune your carburetor for street or race performance. Threaded for easy installation and removal, they manufacture these brass jets to high tolerances for consistency. They're available in dozens of jet and jet drill sizes for precise fitment on countless gasoline-fueled vehicles. When considering replacement parts for your carburetor, trust the expertise of Holley.
( 199 )
$14.33
$12.56
—
$15.38
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock Performer series and Thunder series AVS carburetors only. Do not use them with any other brands.
( 68 )
$14.95
—
$15.95
These Holley main jet extensions feature a new design that actually screws into the metering block. The main metering jet threads into the end of the extension, moving the fuel entry point for the main jet out into the fuel bowl. When it's in this location, it cannot be uncovered preventing a lean condition during periods of extreme acceleration or braking.
( 10 )
$16.95
Don't damage your jets with a clumsy screwdriver. These handy Proform jet installation tools make changing your jets much easier.
( 8 )
$17.99
Your genuine Stromberg carburetors come with size 0.045 jets, but if you want to change the jet size, make sure that you get the genuine article for your carburetor. Stromberg main jets are the real deal. Crafted from brass, these beauties are available in all jetting sizes to match your application. Look for the genuine Stromberg "S" stamped on every part and you'll know that you have the right part and the best quality for your Stromberg 97, 40, 48, and 81 carburetors.
( 11 )
$11.50
These Quick Fuel jet extension kits will solve any lean condition problems you may have on hard acceleration by extending the fuel pickup point of the main jets further into the fuel bowl. These kits require the use of either a notched float or a fuel bowl extension kit.
( 4 )
$11.17
—
$11.18
These Quick Fuel standard main jets are precision-manufactured to an exacting flow standard. They give you a consistent and predictable flow difference from each jet number. Available in different sizes, the Quick Fuel standard main jets let you tune-in your carburetor to the changing weather conditions.
( 5 )
$11.18
These lightweight jet storage plates from Proform hold up to 22 pairs of jets. Never lose or damage another jet again! A must-have for the carburetor tuner, these jet plates do not come with jets.
Not Yet Reviewed
$16.99
Tired of rummaging through your tool box looking for those carb jets you know you had last week? Then you need this Summit Racing™ Billet Aluminum Jet Plate. Made from clear anodized 6061-T6 aluminum and imprinted with our logo, this plate has room to organize 48 Holley jets, and is a lot easier to find than a handful of tiny jets in the bottom of your tool box.
Not Yet Reviewed
$18.99
—
$19.99
On Sale
Holley alcohol jets are specially designed to work with the unique metering blocks of alcohol carburetors. The metering blocks accept the physically larger size of these jets.
( 1 )
$21.20
—
$22.41
$11.66
—
$12.33
Clearance
Mikuni low-speed jets are designed to be used in Super BN watercraft carburetors. The jets are made of brass and are available in different sizes. Order the Mikuni low-speed jets designed to fit your application needs.
Not Yet Reviewed
$14.99
Demon Carburetion Street Demon primary metering jets are just what you need to fine-tune your carburetor for street or race. Threaded for easy installation and removal, Street Demon primary metering jets are manufactured to high tolerances for consistency.
( 8 )
$11.17
Nic Woods Racing long pilot carburetor jets eliminate the need for the plastic extension tube and they will help with idle circuit fuel flow at the hit of the throttle. Perfect for stock float bowl or billet extended float bowls, they come in four popular sizes available individually or as a set. Each long pilot is clearly marked. For optimum tuning, try Nic Woods Racing long pilot carburetor jets.
( 1 )
$20.00
These Demon Carburetion standard main jets are just what you need to fine-tune your carburetor for street or race use. They are threaded for easy installation and removal. The jets are manufactured from quality brass material and drilled to a specific drill size to maintain high tolerances for consistency.
( 2 )
$11.17
Mikuni main jets are available in a wide range of sizes to accommodate your exhaust flow volume requirements. Standard tuning seldom needs more than small adjustments to accommodate a wide range of engine setups. One of the more common required changes is the main jet size. Install Mikuni main jets when you are ready to re-tune and get the most out of your engine.
( 1 )
$11.50
—
$21.99
Clearance
These Mikuni needle jets are the primary fuel passage to the main bore of the Mikuni carburetor. The inside diameter of a specific needle jet will affect the function of the needle. Therefore, needle jets and needles act together as the main system in controlling the amount and mixture of your fuel. Mikuni needle jets are made from brass and are available not only in types, but series and sizes. Be sure to choose the Mikuni needle jets that best suit your needs.
Not Yet Reviewed
$11.99
—
$21.99
Clearance
Convert your carburetors to power jet carburetors with Mikuni power jet kits. Their brass power jets deliver fuel at high rpm, allowing for a reduction in the main jet of about 25 percent. They yield a better midrange setting and fuel-air mixture at the top-end for more power and improved fuel economy. Mikuni TM carburetors accept power jet kits. Prevent leaning out during extended full-throttle runs with Mikuni power jet kits.
Not Yet Reviewed
$35.99
$15.50
Moroso Holley jet extensions reposition jets farther back into the fuel bowl to eliminate fuel starvation. They screw into the metering block--so they won't fall out. These extensions are CNC-machined for precise fit and maximum fuel flow.
Not Yet Reviewed
$22.99
Highly developed engines use fuel more efficiently, but not if they're poorly tuned. Mikuni pilot jets are one piece of your tuning puzzle. Pilot jets are replaceable and the pilot air screw is adjustable. If the jet is too large or the air screw is in too far, then the air/fuel mixture may be too rich. That's one reason why Mikuni pilot jets come in different sizes. The brass pilot jets will deliver a precise amount of fuel so you can have your machine running perfectly. Don't waste time trying to do the impossible--replace your pilot jets and start having fun.
( 2 )
$17.99
—
$21.99
Pro-X Racing Parts offers a full line of pilot and main carburetor jets. These brass replacements are available in a wide range of sizes. They are nozzles in the engine that suck up gasoline so that the carburetor can mix it with oxygen before sending that powerful mixture to the cylinders. Equip your powersports machine with carb jets that ensure top performance—Pro-X!
Not Yet Reviewed
$12.99
—
$21.99
Engine Works main jets are high-quality brass pieces machined to tight tolerances. They are offered in a wide range of jet sizes and available in a 2- or 10-pack. Choose the size and quantity needed.
Not Yet Reviewed
$16.21
Edelbrock offers standard main jets for Holley carburetors. These brass jets are threaded, easy to install and replace, and are stamped with the size. When you need carburetor service parts for your high performance Holley, look to Edelbrock, a proven performance leader.
Not Yet Reviewed
$14.95
Edelbrock metering jets will work on any Quadrajet, and allows you to tune your Q-Jet for performance or economy. Choose the size that works best on your application.
Not Yet Reviewed
$26.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
