Availability
Showing In Stock Items. Show All 42 Items.
On Sale
These custom wire loom kits from Mr. Gasket were designed to eliminate crossfiring and prevent heat damage to ignition wires, while giving them a neat and custom look. Made from heat-resistant black plastic, the wire divider clips to a chrome plated steel bracket. This can be attached to the valve cover, while the wire separator is placed into the ignition wires, keeping them equally spaced. These kits will accommodate 7 to 8mm ignition wires, and include two 4-hole wire separators, eight 2-hole wire dividers, and four chrome plated steel brackets.
( 2 )
$25.95
$14.27
On Sale
Add gleaming custom accents to your accelerator, brake, clutch, dimmer switch, and parking brake pedals. These Deluxe pads from Mr. Gasket are a coordinated line of deep tread, long wearing pedal pads with contrasting chrome grids. They are available in a choice of standard or "barefoot" pedal pad styles.
( 5 )
$30.71
$19.96
On Sale
Seals-It patented firewall grommets are a nitrile rubber material bonded to an aluminum bezel. They're designed to stretch to allow a fitting to pass through, and yet will grip hose to keep debris out. These grommet seals are great for wiring, fuel and oil lines, air and liquid hoses, and other types of lines. And, they can be used for other applications, including race cars, custom cars, marine, commercial equipment, motor homes, and much more. Order the inside/outside diameters needed for your vehicle.
( 63 )
$14.99
—
$23.79
$13.49
—
$21.41
On Sale
MSD's two pin connector kits replaces damaged connectors or aids in custom wiring. This is the same connector used on MSD's magnetic pickup harnesses. Each kit comes with two connectors and four pins.
( 16 )
$14.42
$12.98
On Sale
Flowtech offers these weld-in O2 sensor bungs for custom installations. These high-quality emissions accessories work with your other Flowtech accessories to make your header installation a success.
( 6 )
$21.95
$19.76
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 18 )
$27.37
$15.05
On Sale
Dirty fuel filters can cause many drivability issues, such as low fuel pressure, loss of power, poor fuel mileage, and carburetor flooding. Mr. Gasket chrome canister fuel filters are designed to be installed between the fuel pump and carburetor. They're a welcome addition to any custom or high performance engine. Polished to a high luster to complement other underhood chrome accessories, their inlet/outlet hose fittings have a safety bead for positive fuel line retention. Keep your ride in top shape with a new fuel filter from Mr. Gasket. Features include: * Inline fuel filter for carbureted applications * Chrome finish * Offered in sizes to fit either 3/8 in. or 5/16 in. hose applications * Aluminum versions include a replaceable, powdered bronze filter element * Not for use with fuel injection
( 12 )
$16.15
$14.54
On Sale
MSD mini-stripper crimpers allow you to create your own custom spark plug wires. They provide a "die" to strip either 8mm or 8.5mm wires, and can then be used in a vise to provide a solid terminal crimp to the wire. Finally, there's an inexpensive way to make a set of custom spark plug wires, thanks to MSD.
( 45 )
$17.06
$15.35
On Sale
Add a little pizzazz to your engine with Mr. Gasket chrome valve cover breathers. These custom chrome breathers keep your crankcase properly vented and add a little shine under the hood. Mr. Gasket valve cover breathers are available in push-on or push-in styles.
( 47 )
$17.19
—
$26.70
$15.47
—
$17.36
On Sale
Add a finished look to your custom steel or mag wheels with these chrome dust caps from Mr. Gasket. The wheel hub covers install in minutes, and the heavy chrome plating provides lasting beauty.
( 21 )
$13.81
$12.43
On Sale
Seals-it grommet seals use a combination of fire-retardant rubber and an anodized aluminum bezel, making them the perfect choice for many applications. In race cars, they keep unwanted smoke and fumes from entering the driver's area, while protecting lines from chafing and abrading on rough surfaces. In hot rods and custom car applications, they provide the perfect "finishing touch" to all through-panel installations. Wiring, fuel and oil lines, air and liquid hoses, and all other lines that make up your rod or custom can make an otherwise detailed installation look unfinished. Seals-it grommet seals add the well-organized, professional appearance that you want throughout your vehicle.
( 2 )
$18.99
—
$19.99
$17.09
—
$17.99
On Sale
AEM Electronics X-Series gauge faces help to revive the look of your dash panel. These specialized replacements are available for a wide range of instrumentation—such as fuel and oil pressure, temperature, EGT, speed, volts, boost, and more. The kits also include a polished silver bezel. Customize or refresh your data clusters with AEM Electronics X-Series gauge faces.
( 9 )
$14.12
$12.71
On Sale
Weiand is no stranger to the performance aftermarket. Since the 1930s, Weiand has delivered serious performance parts to street / strip enthusiasts, marine customers, and hardcore racers. Times have changed, as bigger motors, higher RPMs, better ignition systems and ultra efficient cylinder head designs have generated a need for better manifold technology. This Supercharger Technical Manual will guide you through every detail of your power-adder.
( 1 )
$17.99
$16.19
On Sale
Mr. Gasket offers these carburetor linkage rod ends to allow you to assemble your own custom carburetor linkage system. They are manufactured from steel and feature a gold iridited finish for protection. Are you building a custom linkage for your carburetor? Try one of these Mr. Gasket carburetor linkage rod ends for trouble-free operation, no matter where the position is.
Not Yet Reviewed
$32.83
$18.06
On Sale
Enhance your wheels with some slick, dome-style Quadboss center caps. They're available in black or chrome (depending on application), and ideal replacements for missing or damaged caps. Quadboss offers specific models to match their wheels and successfully complete your customization.
Not Yet Reviewed
$12.60
$11.34
On Sale
SCT offers high-speed USB data-logging cables for its X3 and Livewire performance tuner/programmer models. These replacement cables facilitate the use of hand-held fuel economy programming and custom tuning. Order the cable designed for your application.
( 2 )
$10.99
$10.79
On Sale
Milwaukee Front Brim Hard Hats with 4-Point Ratcheting Suspension (Type 1, Class E) are designed to adapt to your jobsite. Each hard hat has a Milwaukee BOLT headlamp mount that works with most headlamps for easy, secure attachment. Four BOLT accessory slots and two universal accessory slots enable you to easily integrate additional personal protection equipment and accessories onto the hard hat. These hard hats feature an adjustable swinging ratchet for better comfort and have a 4-point ratcheting suspension for quick adjustment. The hats also include a BOLT marker clip that allows for easy access to pens and markers. In addition, this head protection includes a moisture-wicking sweatband to stay cool and dry fast. Milwaukee construction hard hats are ANSI/CSA approved and can be customized by adding your logo. Additional details: * Compatible with all BOLT accessories * Cushioned ratchet and crown pads * UL Third-Party Tested and Certified * Available in a variety of colors
Not Yet Reviewed
$19.97
$14.97
On Sale
Simpson and FIST team up to bring you the FIST Nocturn motorcycle gloves. The gloves offer minimalistic lightweight design for maximum performance and feel. Sheepskin leather palm makes for superior wear and supreme comfort and heavy-duty spandex upper features full breathability, durability, and flexibility. The gloves also feature spandex finger gussets for ultimate flexibility and dexterity, along with touch screen conductive index finger and thumb. A custom FIST X Simpson closure offers a broad range of adjustment to keep your gloves secured just how you like them. The gloves are available in in a range of sizes and colors. Order the glove size needed.
Not Yet Reviewed
$41.15
$22.63
On Sale
Replace your existing FaceShield Air lenses with these convenient WeatherTech lens refill packs. They offer the same reusability and anti-fog treatment to provide a clear obstructed view, no matter your activity. They are available in two sizes to custom fit your FaceShield Air, and each 10-pack will keep plenty of replacement lenses at-the-ready.
Not Yet Reviewed
$24.95
—
$25.95
$22.46
—
$23.36
On Sale
These Mr. Gasket universal gasket sheets give you the ability to custom-make your own gasket. They are available in different materials with varying lengths and widths for multiple applications.
( 42 )
$18.34
$16.51
On Sale
Bully Dog dash mount gauge pods install easily on the dash, positioning your gauges in an easy-to-read place. They are custom-molded to fit each vehicle and feature a black finish. Read your gauges while keeping your eyes forward on the road with one of these Bully Dog dash mount gauge pods.
( 5 )
$15.99
$14.39
On Sale
These magnetic oil drain plugs from Mr. Gasket accumulate metal particles found in the oil, preventing possible damage to the engine. Best of all, they're not only quality-made, they're totally affordable protection for your investment!
( 26 )
$17.60
$15.84
On Sale
These fuel pump block-off plates cover the opening left when you convert from a mechanical to an electric fuel pump. They're made from precision-cut steel that's highly polished and chrome plated. Gaskets are included.
( 28 )
$18.86
$12.26
On Sale
These fuel pump mounting plates mount behind your mechanical fuel pump for carbureted small block Chevy V8 and 90 degree V6 engines. They add a touch of shine to the area behind your fuel pump, and even come with a gasket.
( 10 )
$18.31
$16.48
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
