Availability
Showing In Stock Items. Show All 55 Items.
DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: * Made of glass fiber and polyester laminated to an aluminum outer layer * Offers excellent inexpensive, long-lasting thermal protection with no modifications needed * Available in different diameters
( 23 )
$10.99
—
$22.99
Design Engineering Fire Sleeves offer ideal protection against intense underhood heat, making them perfect for protecting hoses, oil and fuel lines, and electrical wiring. The Fire Sleeves are constructed of a woven fiberglass braided sleeve heavily coated with 100 percent iron oxide silicone rubber. They are capable of withstanding temperatures of up to 500 degrees F continuous and up to 2,000 degrees F intermittent.
( 27 )
$21.99
Summit Racing™ chemical-resistant heat sleeves easily slide over hoses and lines to keep them protected from damaging radiant heat. They are made from lightweight material that is resistant to fuel and oil. Summit Racing™ chemical-resistant heat sleeves are available in several diameters to cover all of your automotive needs.
( 9 )
$13.99
—
$21.99
Thermo-Shield aluminized adhesive-backed tape is great for wrapping the hoses and wires that you don't want to remove. It can also be wrapped around odd-shaped components for lasting heat protection. Wrap it around a fuel line and say goodbye to vapor lock. It reflects radiant heat up to 2,000 degrees F.
( 22 )
$22.48
By wrapping your headers with Thermo-Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent, and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust wrap can withstand continuous heat up to 2,000 degrees F, and installs easily with standard hose clamps or the optional stainless steel Snap Straps.
( 114 )
$10.42
—
$18.47
Allstar Performance heat sleeves are non-flammable and resists temperatures of up to 500 degrees F. The high-temperature silicone coated fiberglass sleeves are an excellent choice for protecting fuel lines, wiring, cables, and various similar uses. The sleeving is resistant to gasoline and many other chemicals.
( 1 )
$15.99
—
$18.99
Dress up your hot rod with an old-school look, but with modern heat shield technology, by using Heatshield hot rod sleeves. The special weave of these thermal sleeves allows them to expand and contract over fittings and terminals. They're capable of withstanding 1,100 degrees F continuous and are non-flammable. They're perfect for shielding fuel lines, helping to stop vapor lock and protect sensitive wire looms from close proximity heat, shield brake lines and hoses, and stop clutch cables from melting. Do you have a custom build ahead of you? You'll want to use Heatshield hot rod sleeves.
( 147 )
$14.99
—
$20.99
Redhorse Performance offers a comprehensive line of automotive plumbing accessories—including 244 Series fire sleeves. Featuring a woven high-temperature fiberglass lining covered by a thick, 100 percent silicone jacket, which provides superior heat protection for fuel, oil, brake, or electrical lines, these fire sleeves are designed for use with AN type of hose. They are available in a wide range of diameters and lengths, and each fire sleeve is rated to withstand continuous working temperatures up to 500 degrees F, and intermittent heat up to 3000 degrees F. Choose the model you need.
( 2 )
$17.19
—
$18.61
Thermaflect tape by Heatshield Products helps shield fuel lines, brake lines, wire looms, and more from radiant heat—making it ideal for quick "on the go" heat problems. This reflective heat shield tape cuts easily and can be used to insulate components without disassembly or to hold other thermal insulation in place. Plus, installation is a breeze with the Heatshield high-temperature self-adhesive backing that sticks to any clean surface. Help your ride stay cool with an assist from the Heatshield Products Thermaflect tape products best suited for your application!
( 27 )
$21.99
Funk Motorsports silver heat sleeving allows both protection of vital lines and signal cables, while at the same time keeping your engine bay or cabin tidy. Silver heat sleeving uses malleable high-temperature silica with a heat-reflective material laminate, and is designed to easily slip over cables and lines in situe, without the need for any line or cable disconnecting. Funk Motorsports extremely popular silver heat sleeving is now offered in Velcro® form and is available in a variety of diameters and lengths. With silver heat sleeving by Funk Motorsports, you can protect your vehicles sensitive lines running close to turbos, manifolds, and more! Order the silver heat sleeving in the diameter and length needed. Benefits and features: * Easy fit, Velcro® heat sleeve * Reflects away radiant heat—withstands direct heat of up to 250 degrees C * Available in a variety of diameters and lengths, silver Velcro® heat sleeving can be easily cut to size for any application * Protection sleeve is also suitable for 4 AN, 6 AN, 8 AN, 10 AN, 12 AN, and 16 AN hosing * Provides protects for important lines and feeds within your engine bay to ensure the consistent transfer of fluids to important components to ensure optimum performance over time * Protects vital lines and feeds that are sensitive to heat. Protect fuel lines running close to a manifold or oil return lines positioned close to the hot side of the turbo to prevent failure or even worse—fire! * Reliability—although all may seem well initially, heat can gradually build up to a huge issue after time on track or on fast road applications, this heat sleeving helps reduce brake fade and vapor lock by protecting crucial fluid lines on your vehicle to ensure optimum reliability over time Important Note: This heat sleeving is not designed to be in contact with, or in very close proximity to a heat source (such as an exhaust or a turbo). As a first line of defense, it is recommended moving line as far away as possible from the heat source to provide the best level of protection, then shielding this further using one of these heat sleeves.
Not Yet Reviewed
$18.28
—
$19.69
Protect-A-Wires from DEI provide thermal protection for various under-hood components, such as spark plug wires, electrical wiring, and hoses, by shielding them from extreme engine and exhaust heat that can cause cracking, hardening, or burning. Basic sleeves are made from the same fiberglass composite as Protect-A-Boots to resist high temps. Upgrade kits include materials such as silicone and titanium for even greater heat insulation. To install, simply remove the distributor boot and connector, then easily slide on your Protect-A-Wire covering over the spark plug. This tubing can also be used to wrap speedometer cables, electrical wiring, and hoses. Multiple diameters, lengths, and colors are available. Product Overview: * Durable construction, made from high-temperature resistant materials * The titanium versions are resistant to chemicals and oils, offering comprehensive protection in various engine environments * Can be used to protect a wide range of components, including spark plug wires, fuel and oil lines, and speedometer cables, and are suitable for various vehicles from street cars to Powersports and marine applications * Shields sensitive components to prevent burning, cracking, and hardening of spark plug wires, electrical wiring, and hoses caused by severe under-hood temperatures, saving on replacement costs * The sleeves are designed to easily slide over existing wires and cables * Provides a professional-looking finish under-the-hood of your vehicle
( 5 )
$10.99
AP Exhaust offers a full line of durable, high-quality factory replacement exhaust system products, including their ANSA OE replacement exhaust tailpipes. These tailpipes are made from 100 percent aluminized heavy-gauge steel piping with re-aluminized weld seams to help prevent corrosion. A cracked or damaged exhaust pipe may reduce your vehicle's fuel efficiency and cause various engine performance issues. Fortunately, it's easy to get high-quality replacements that won't break the bank with AP Exhaust components, designed to look and fit like original equipment. Order the ANSA OER exhaust tailpipe designed to fit your application needs.
Not Yet Reviewed
$21.99
URO Parts air pump hose fittings are perfect replacements for a split OE air injection pump hose. They will restore air injection functionality for proper control of hydrocarbon emissions. URO hose components are made from high-quality materials the resist cracking due to engine heat and oil/fuel vapors. URO Parts air pump hose fittings will provide the correct fit and function, just like the originals they are replacing.
Not Yet Reviewed
$16.99
Service your air/fuel system with HardDrive intake manifold mounting flanges. These handy accessories are available as OEM replacements or for oversize EFI throttle bodies. They're offered for fitment on a wide range of models from the '80s, '90s, and 2000s. For the best performance, secure your intake manifold with quality parts from HardDrive.
Not Yet Reviewed
$19.76
Walker steel band-style exhaust clamps combine a 360 degree seal with a unique design that won't crush pipes and ruin exhaust flow. This particular style was created to "lap-joint" two pipes of different diameters together (one pipe fits inside the other). The clamps come with pre-attached hardware and Grade 8 bolts for high strength and temperature durability.
( 242 )
$11.99
—
$14.99
Walker exhaust pipe adapters and reducers are offered in different styles and sizes to accommodate your specific installation needs. These exhaust components are quality manufactured from either low-carbon or aluminized steel for durability, and are perfect for repairing or building your own custom exhaust system. Whether you are connecting pipes of different sizes or the same size, Walker exhaust pipe adapters and reducers have you covered.
( 208 )
$14.99
Walker band clamps are ready to help your wrap up your exhaust installation. They are manufactured from premium steel to provide greater durability, and are available in a range of sizes. Walker band clamps offer an efficient, economical way to get your exhaust connected.
( 88 )
$10.99
—
$17.99
Walker exhaust pipe connectors are designed to connect two exhaust pipes of the same inside or outside diameter to make exhaust installation easier. These pipe connectors are available in a range of different styles and sizes to accommodate your exhaust system needs. They are manufactured from premium material to provide greater durability, and an optimal OE-style fit. If you are looking for premium exhaust system hardware and accessories manufactured with great attention to detail, make Walker is your #1 choice.
( 120 )
$16.99
Dorman exhaust manifold mounting hardware is designed to replace broken, stripped, or corroded stock fasteners. The studs, bolts, and nuts are manufactured from quality materials and offered in a variety of finishes. Dozens of options are available; choose the lengths and thread sizes needed for your specific vehicle application. Pieces are sold individually, in pairs, or larger quantity sets. A secure exhaust manifold begins with Dorman mounting hardware.
( 282 )
$10.99
—
$18.99
These Standard Motor AIR pump check valves are one-way airflow control valves in the air supply tubes to the exhaust system. They are designed to prevent exhaust gas backflow into the air pump system. The valves can also be used in the air tube to the 3-way catalytic converter.
( 8 )
$11.99
—
$19.99
AP Exhaust TorcTite pre-formed exhaust clamps make for a fast, easy, and accurate installation. These AP clamps are designed with pre-attached hardware featuring an exclusive reaction block that provides a full 360 degree equal distribution of stretching forces. This prohibits pipe distortion while creating a complete seal around the joined exhaust components. The clamps are available in a variety of styles, materials, finishes, and diameters.
( 61 )
$21.99
Walker insulators are high-quality replacements made to work seamlessly with Walker aftermarket replacement parts. These exhaust insulators are manufactured from premium materials and are available in various applications.
( 74 )
$10.99
—
$16.99
Walker pre-bent intermediate pipes are manufactured and designed for durability with precision benders. The then fixture checked to ensure a precise fit for quick and easy installation. Hundreds of configurations are available for most domestic and import applications from the 1950s and up. Select the size, material, and other options recommended for your vehicle.
( 319 )
$15.99
—
$21.99
AP Exhaust Technologies not only offers a wide selection of reliable and durable mufflers, pipes, and catalytic converters, they also have clamps, brackets, hangers, and hardware compatible with all of their exhaust components. These flange hardware kits feature nuts, bolts, and springs (depending on application) so you can fasten your new exhaust without hassle. Order the kit recommended for your vehicle application.
( 1 )
$10.99
—
$13.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
