Availability
Showing In Stock Items. Show All 42 Items.
With Raybestos R-Line axle hubs, you can be assured that there are no significant differences from the original design. Offering a full line of coverage from the 1970s and up, along with great value, R-Line replacement hubs are tested to ensure and maintain safe and reliable service. Veering from the original design can cause problems. Raybestos steel axle hubs deliver proper fit and performance that makes your install hassle-free and provides peace of mind. Order the model designed for your vehicle.
( 6 )
$76.99
—
$130.99
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel wheel hub assemblies come complete with Timken USA bearings and races and a corrosive-resistant coating. In these front hubs, the races will be installed along with new stock size wheel studs, and a new castle nut, cotter pin, washer, and grease cap are included. Each hub is inspected after the races are installed for proper run-out spec to ensure optimal braking performance and no pad knock. Choose the kit specified for your Corvette.
( 2 )
$316.99
If you want to change your 1955-60 cars to new-style tapered bearings, you'll need Classic Performance roller bearing upgrade kits with aluminum hubs. These complete kits feature forged aluminum hubs for strength, longevity, and weight savings. Installed bearing races simplify the conversion. Update your classic ride with Classic Performance roller bearing upgrade kits with aluminum hubs. Additional information: * Can be used on some 1955-68 full size cars with slip-over style disc brake rotors * Stock replacement for 1961-68 drum brakes
( 18 )
$224.99
Trail-Gear unit hubs are not just another aftermarket 1-ton unit hub that's been machined down and modified from an 8-lug to a 6-lug application. No, Trail-Gear designed these units for a specific application, so the hubs will bolt right onto Dana 60 or 9 in. housings that are set up for unit hubs. They're made to accommodate a 30- or a 35-spline axle shaft and use a 1/2 in.-20 threaded wheel stud with a 6 x 5.5 in. wheel bolt pattern. These are the same unit hubs that you will see on most competition buggies. They are ultra-strong and easy to replace. Simply unbolt the old one and bolt on the new replacement hub. This is a much simpler and stronger unit then the stock spindles being replaced. All unit hubs include integrated roll pin to prevent the spindle nut from coming loose.
( 1 )
$549.99
Scott Drake drum brake hubs enable you to easily replace your worn-out parts with brand spankin' new steel plates. They are available with either four or five holes for wheel studs, depending on your vehicle.
( 3 )
$98.95
Detroit Speed offers wheel hub conversion kits for hundreds of Chevrolet and GMC vehicles from the 1990s and up. They will convert select 2WD applications to a 5-lug bolt pattern. This allows you to have more options for aftermarket wheel and brake systems. The DSE wheel hubs have both 5 x 5 in. and 5 x 4.75 in. bolt patterns. Use of high performance hubs results in improved hub stiffness and performance, reduced brake caliper piston knock-back, and improved hub durability. The wheel hub remains in the factory location and does not affect wheel offset. Additional details: * Convert your 6-lug hub packs to a 5-lug for more aftermarket wheel and brake options * 100 percent bolt-on for a quick and easy installation in your garage * Modern wheel hub bearings with dual bolt pattern * Bullet nose machined wheel studs * Electroplated black zinc rust-proof coating * DSE wheel hubs do NOT have ABS sensors * NOT compatible with 4WD applications
Not Yet Reviewed
$498.95
Your vehicle can't go anywhere without wheels. Crown Automotive wheel hub assemblies get your wheels bolted up for smooth rolling. They have a selection to fit a range of applications, and all offer steel construction in direct replacement designs. Crown wheel hub assemblies ensure a good fit and lasting durability to take you wherever you want to go.
( 5 )
$32.99
—
$112.99
Yukon Gear & Axle offers front and rear hub replacements for a variety of vehicles and axle applications, from 1955 and up. These steel units are available in different styles and finishes. Order the model recommended for your upgrade.
( 1 )
$239.99
—
$540.99
Ford Performance Parts replacement IRS Mustang Cobra hubs are direct replacements for your late model Cobra. They feature the stock 5 x 4.5 in. bolt circle and use a 2.775 in. wheel pilot hub to fit today's most popular Mustang wheels. Original equipment on a 1999-2004 Ford Mustang Cobra, these Ford Performance Parts replacement IRS Mustang Cobra hubs will keep your rear wheels operating smoothly.
( 11 )
$225.99
Motive Gear drum brake wheel hubs provide a direct-fit to replace worn hubs. Manufactured from billet steel, they are built to OE specs, providing reliable, long-lasting service, and an easier install.
( 1 )
$242.99
Never again will you need to check the torque of your hub studs or even worry about your wheel hubs when you're on the trail. Longfield studless hubs are stronger than the OEM locking hubs, built to handle even higher torque loads. These kits also include a full set of front wheel bearings to replace your old, worn-out bearings. They're constructed of beefy chromoly steel for more hub strength—and are designed for extreme abuse. Choose the model tailored to fit your specific vehicle.
Not Yet Reviewed
$907.07
Centric offers the widest range of wheel hubs and bearings in the market. These OE-quality replacements deliver precise fit and the performance you expect. Order the model recommended for your vehicle application.
( 3 )
$143.99
LEED Brakes offers wheel hubs for a variety of applications, including many classic Ford Broncos from the 1960s and '70s. These forged steel drum brake wheel hubs are built to outlast and outperform the factory cast iron hubs. The heavy-duty replacements will enable you to conquer the toughest trails and most demanding off-road adventures with confidence. Strengthen your Bronco's spirit—order the hubs recommended for your truck. Additional notes: * Unmatched strength: Forged steel construction delivers superior durability compared to the weaker cast iron hub * Built for adventure: Tackle any terrain with the peace of mind knowing your hub can handle it * Perfect fit: Seamless compatibility with your factory drum brakes or LEED Brakes front disc brake conversion kits * Upgrade with ease: Simple installation gets you back on the road quickly
Not Yet Reviewed
$249.99
Ford Performance 2015-17 Mustang wheel hub kits feature ARP wheel studs. They're available for both front and rear hubs. Ford and ARP features: * One pair of upgraded hubs with 3 in. ARP studs * Open-end wheel lug nuts * Hub retaining nuts (front) * Hub retaining nut covers (front) * Hub attachment bolts (rear) * Axle retaining nuts (rear) ARP 3 in. stud specs: * Wheel stud style: Press-in * Thread Size: M14 x 1.5 RH in. * Knurl diameter: 0.625 in. * Under head length: 3.4 in.
( 4 )
$420.99
Race Star offers 53 Jr. Dragster wheel hubs for a variety of applications. These replacements are manufactured from original materials and specifications to ensure proper fit and optimum performance on the track. Order the hubs recommended for your vehicle.
( 1 )
$67.16
OMIX-ADA has the replacementwheel hub assemblies that you need to keep your rig rolling! These wheel components are offered for a range of applications, from classic to current. Their quality steel construction and direct replacement design ensure a perfect fit and lasting durability.
( 4 )
$80.99
—
$92.99
GUNI GUNIHUB 45 universal rotating hubs are used when brakes are locked up or when a car is stuck in the parked gear. Just install the GUNIHUB to any 4- or 5-lug pattern for full wheel rotation. Locking pin is included. These are the ultimate tools to move a car onto a tow truck or to another safe location. (For non-motorized use only. Use with GUNI 45 or 45S only; sold separately.)
Not Yet Reviewed
$129.00
GSP wheel bearing and hub assemblies offer high-quality, premium solutions to ensure a comfortable, quiet ride. The wheel bearing hub assembly is a very important safety part required to bear the axial and radial load of a vehicle, and strict manufacturing processes are followed using top-quality materials to ensure long term life and performance. Product features: * All hub assemblies go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components * In order to increase longevity and resist abrasion, GSP's ball bearings are precisely spaced to the appropriate clearance for smooth rotation * GPS's embedded sealing system, automatic grease injection and integrated ABS sensor guarantee an improved steering and better control when driving your vehicle in all road conditions * To ensure a smooth surface, free from defects, burrs, and cracks, all bearing housings are manufactured with polyamides for added impact toughness and age resistance
Not Yet Reviewed
$68.99
Wilwood forged billet hat mount hubs are made from premium grade alloy billets, forged into shape under high-heat and pressure, then CNC-machined for precise fit on each spindle application. Intended for use with aluminum mounting hats, hubs include bearing races and screw-on aluminum caps.
Not Yet Reviewed
$167.56
Dorman wheel hubs are built with an industry-leading evaluation process that ensures their hubs are designed for long-lasting reliability and performance. Plus their vehicle try-on testing ensures a proper fit, every time. They feature sturdy steel construction. Bearings press onto the hubs for ease of installation. Wheel hubs are an integral component of your wheel assembly, crucial to establishing the handling characteristics of your vehicle. Trust Dorman hubs to deliver the best performance.
( 6 )
$20.50
—
$134.95
Summit Bucks
ACDelco GM Genuine Parts wheel hubs provide the attachment point for the brake rotor and road wheel, and are GM-recommended replacements for your vehicle's original components. These OE hubs are supported and allowed to rotate by the wheel bearing. They've been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Notes: * Do not operate a vehicle with a worn wheel hub assembly. Here are warning signs to look for: - Grinding when the vehicle is in motion - Knocking or clunking - Looseness - Wheel vibration and/or wobble - Humming, rumbling, squealing, roaring, or growling - ABS, Traction Control, Stability Control light on
Not Yet Reviewed
$53.99
Pare down the weight and keep the strength with Wilwood Starlite 55 Wide 5 racing hubs. Starlite 55 hubs have been reconfigured to eliminate unnecessary weight and components to meet or beat 8-bolt magnesium assemblies. With less weight, Wilwood Wide 5 racing hubs' high-density aircraft aluminum construction provides superior strength. Front hubs further reduce weight by eliminating bolt bosses and using a fiber-reinforced composite snap-cap dust cover. Optional drilled studs lighten your weight even more. Several options are offered to fit your application: bare or black E-coat finishes; coarse or coarse drilled studs; and standard, GM, and dynamic mount offsets. In racing, you need the beef, but not the weight. Wilwood Starlite 55 Wide 5 racing hubs offer muscle without the mass.
Not Yet Reviewed
$185.20
—
$273.45
Make your pit crew, and back, happy with the Spidertrax Drive Snout. Designed to bolt-on to Spidertrax Ultimate unit bearings, these parts allow for easier tire changes by giving that wheel and tire a place to rest during install. They're perfect for go-fast racing events where the speed of a tire change matters. The Drive Snout is designed for 6- and 8-lug applications. Drive cover sold separately.
Not Yet Reviewed
$89.00
JOES Racing Products wheel hubs are designed to increase the speed of your kart. Their quality finishes and concentric machining mean that you get top-notch hubs, and the sealed bearings provide smooth operation for added performance. Crafted from aluminum and black anodized, these wheel hubs use standard American bolt patterns for both 1/4 in.-28 and 5/16 in.-18 size wheel studs. They're available for both the front and rear of your kart and/or Quarter Midget racer. Order the hubs that best fit your application.
Not Yet Reviewed
$42.95
—
$64.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
