Availability
Showing In Stock Items. Show All 28 Items.
Going manual requires Warn spindle nut conversion kits. These kits allow you to replace your Warn factory automatic locking hubs with manual hubs and are available to correspond with your specific Chevy, GMC or Ford application. Warn spindle nut kits include inside bearing nuts, outside bearing nuts and lock washers. Go for increased durability and fuel economy; go Warn spindle nut conversion kits.
( 15 )
$85.99
—
$110.99
Spicer Drivetrain Products have you covered when building a new axle or replacing a damaged nut. These strong replacement spindle nuts will provide the performance and reliability you need. They're available individually or in kits for a wide range of front or rear applications from 1960 and up.
( 11 )
$2.99
—
$34.99
Stage 8 offers the opportunity to restore the dependability of Dana 44 and Dana 60 front assemblies with Stage 8 X-Lock locking spindle nuts. These patented locking spindle nuts are guaranteed to never loosen, even under the most extreme conditions, and were developed for the rugged life of competitive off-road vehicles. Any vehicle with Dana 44 and Dana 60 front assemblies can be retrofitted with the X-Locks for dependable, long service life and save thousands in repair dollars. Stage 8 X-Locks are laser-cut from 4130 steel and can be easily installed without any special tools. They are heat-treated, through-hardened, and will maintain bearing preload value. They can be easily locked within 1/2 degree of any position.
( 15 )
$96.60
The right hardware is a necessity for your car. Dorman's selection of axle nuts offers the proper replacements when you need an OEM fit. It's normally recommended that if you remove spindle lock nuts, you should replace them. And, if you had to use a breaker bar to get your axle nuts off, definitely replace them. No matter the reason, even if you just lost one, Dorman axle nuts are affordable, quality replacements. They're available in a variety of styles and quantities for fitment on specific applications.
( 42 )
$5.99
—
$168.99
Crown Automotive spindle nuts allow you to replace your stock nuts easily. Spindle hardware should be replaced if it shows signs of wear or during a rebuild. These OE replacement parts are an exact fit for your Jeep. They're available individually or in kits with the washers included. Check the attributes for the right parts for your application.
( 2 )
$3.99
—
$22.99
SKF Bearings locking spindle nuts offer a robust and affordable lock nut system for tractors and trailers. Designed to the highest quality standards to ensure long life and safety, they are forged and precision machined with two high-strength lock bolts, yielding one of the strongest systems available today. When coupled with the stamped, precision lock washer, they allow you to fine tune end-play exceeding minimum maintenance requirements.
Not Yet Reviewed
$32.79
Wilwood locknut kits are designed for Wilwood's Pro spindles. They can also be used with popular Pinto / Mustang II and Granada spindle pins. Wilwood locknut kits contain a spindle nut, lock assembly, washer, and cotter pin.
Not Yet Reviewed
$27.43
—
$37.88
When you're ready to do an install, don't forget the fasteners! Beck/Arnley axle nuts are constructed from quality materials to exacting tolerances to ensure a precise fit. They're available in different configurations and styles to accommodate your replacement needs.
( 1 )
$3.99
—
$10.99
Trail-Gear spindle nuts replace your wheel bearing retainer nuts. Usually, your stock nuts and star washers can be used several times, but with the added maintenance of an off-road rig, they probably need to be replaced. Choose these Trail-Gear kits that include two nuts, a star washer, and a flat index washer to get 'er done right!
( 8 )
$14.99
—
$69.99
Yukon Gear & Axle spindle nuts are factory-style replacements for your axle. They're available individually or in a kit to service a variety of specific axle applications.
( 5 )
$18.99
—
$131.99
Keep your spindles safely secured with Allstar Performance spindle lock nut kits. These kits include nut, washer, and a cotter pin for stock spindles.
( 3 )
$8.99
—
$9.49
Wilwood disc brake spindle nuts are designed for OEM-style spindles. They are available for several applications and are made of quality alloy steel.
Not Yet Reviewed
$6.99
Keyser Manufacturing Wide 5 and 5 x 5 spindle nut kits include a spindle nut, locking ring, metal washer, and set screws. They are available with a steel or aluminum spindle nut.
( 1 )
$13.99
Allstar Performance spindle nut kits are designed to fit Wide 5, Allstar, Howe, and Port City 5x5 spindles. These kits include a nut, retainer ring, lock ring, and locking screws.
( 1 )
$14.99
—
$23.99
Van Steel offers spindle nuts for a variety of applications, including many Chevrolet Corvettes from the 1960s, '70s, and '80s. Each kit includes a spindle nut, washer, and cotter pin for one spindle.
Not Yet Reviewed
$8.99
Raybestos spindle nuts allow you to replace your stock nuts easily. Spindle hardware should always be replaced during a rebuild or if it shows signs of wear. These OE replacement parts are an exact fit for your application.
( 2 )
$24.99
Restore your Willys with OMIX-ADA spindle nut kits. They include the nuts and washers to service your vintage Jeep. They are direct replacements to ensure the proper fit and function.
( 2 )
$9.99
JOES Racing spindle nuts are available in sizes to fit Wide 5 and 5 x 5 spindles. Multiple holes in the spindle nut and a slotted retainer allow you to locate the locking tab after the hubs are torqued. Secure the spindle nut assembly at the exact torque spec you want, then set the locking tab so they cannot back-off.
Not Yet Reviewed
$28.95
If you have your Heidts spindles, you better not forget the spindle nut kit to do the install! Heidts spindle nut kits are required components that are to be used in conjunction with your spindles to ensure a proper install.
( 1 )
$29.00
JOES Racing Products Micro Sprint spindle split nuts utilize a cinch bolt system to securely lock down your hub at any torque setting. They are made from 6061-T6 aluminum with 1 in.-14 thread. Tired of using plastic nyloc nuts to hold on your Micro Sprint hubs? JOES has the solution in their spindle split nuts.
Not Yet Reviewed
$19.95
Clearance
Out-Space Racing Products spindle nut kits are designed to fit their Mustang II spindles. These kits include a nut, retainer ring, lock ring, and locking screws.
Not Yet Reviewed
$10.99
$5.50
OMIX-ADA spindle nuts are designed to replace missing, cross-threaded, or damaged stock spindle nuts. They're available for a variety of differentials and vehicle applications.
Not Yet Reviewed
$7.99
—
$9.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
