Availability
Showing In Stock Items. Show All 55 Items.
King Shocks seal kits are the best way to rebuild your King shocks. These convenient pre-packaged seal kits are genuine factory replacement parts made from the proper materials for peak performance. If you race in a harsh environment such as off-road or dirt track, keep your shocks functioning at their optimum level by refreshing them with King Shocks seal kits.
( 1 )
$28.50
Gabriel air shock fill hose kits let you mount valves in a convenient place for pumping up those air shocks. There might just be a little more bounce in your step when you're finally able to add air and lift to your shock absorbers with ease! Kits include: * Four tube nuts * Four tube clamps * Ten packing O-rings * Tube * Tee block with air valve fitting * Valve core * Washer * Two hex nuts * Seal
( 39 )
$61.99
Bilstein replacement external shock snap rings are available in different sizes to accommodate your suspension application. Order the model recommended for fitment with your shocks and struts.
( 12 )
$2.99
Keep your suspension working the way that it's supposed to with AFCO Racing shock replacement parts. The folks at AFCO know that your shocks take a lot of abuse through the course of their life—and that replacing the whole unit can get expensive. For this reason, they offer a variety of replacement components, including bearings, clips, spacers, adjuster nuts, valves, coilover snap rings, and more. These parts are identical to the originals and easily replace commonly worn-out parts. Keep your car on the track or the street with efficient handling, courtesy of AFCO Racing shock replacement parts.
( 2 )
$13.99
—
$50.39
Fox Racing Shox offers a variety of replacement components for their shock absorbers. From damping and bar pin assemblies, to check valves and hardware, you can repair or rebuild your suspension without the expense of complete replacement.
( 1 )
$5.00
—
$45.00
QA1 T-bar kits are designed to convert loop-type QA1 adjustable shocks to a T-bar mount. They require the use of a 3/4 in. inside diameter bushing of the current loop mount. The kits include a chrome plated T-bar, two retaining clips, two 3/8 in. bolts, and two 3/8 in. lock nuts. The T-bars are available in different lengths to fit the QA1 shocks.
( 23 )
$49.95
RideTech trunnion mounts, also known as T-bars, are constructed to make it easier to install your lower shock bearing mounts to an already existing OEM control arm. They feature elongated mounting holes and include snap rings. Don't waste time rigging your own mounts; let RideTech do the work for you.
( 8 )
$20.00
—
$25.00
When changing front struts, the clevis bolts which are removed from the lower mount are a torque-to-yield bolt. This means that once they are removed they have to be replaced. Pedders strut clevis mount bolts are designed to fit a range of struts and are necessary to locate the lower section of the front strut to the stub axle. One kit per side (front only) Sometimes you forget about the smaller things. Pedders offers the struts and the hardware to get the job done.
( 3 )
$19.76
QA1 offers a complete line of shock and strut components to maintain or upgrade your auto suspension. These include piston rods, bushing sleeves, nitrogen gas bags, hardware, and more. Match the shock series on your vehicle with the corresponding replacement parts for proper service, then enjoy the handling and ride performance you expect.
( 11 )
$1.50
—
$99.95
Old Man Emu has developed a range of complete top hat kits to meet the demand of increased aftermarket replacement bushings and components for independent coilover strut front suspension set ups. Available in popular fitments to accommodate those demands, these complete kits include a new bearing plate, high duro rubber isolator, rubber bushes, washers, crush tube (if applicable) and mounting nuts—everything required to fully replace the original strut top hat. All components are to the original equipment specifications and are a straight forward bolt-in solution. When it comes to your vehicle's suspension performance, you can rely on quality parts and components from Old Man Emu. Order the top hat kit to fit your vehicle's application.
Not Yet Reviewed
$85.95
QA1 shock mount sleeves are designed to fit the mounting eye of your QA1 shock. They are manufactured from high-grade steel and feature a gold iridited finish for durability. The QA1 shock mount sleeves include four different inside diameter sleeves. Don't worry about the size of the bolt going through the shock eye--these QA1 shock mount sleeves include the correct diameter for most applications using coilover shocks.
( 7 )
$26.95
Are you replacing your worn-out shock bushings? Don't forget the Bilstein replacement shock mount sleeves. They are manufactured from high-strength steel to withstand any road conditions. Available in different diameters and types, the Bilstein replacement shock mount sleeves are sure to keep your Bilstein shocks performing at their optimum levels.
( 17 )
$3.99
Gabriel air shock fill valves are small parts that are the literal gateway to better spring in your suspension system! They're where you'll be adding sufficient air to your shock absorbers. Gabriel Air Shock Fill Valves are manufactured from quality materials and can be installed anywhere--so you can fill your shocks quickly and easily.
( 9 )
$22.99
Bilstein spring seat adapters help to facilitate the installation and performance of your shocks and struts. Order the kit recommended for your suspension setup.
( 1 )
$16.99
Some shock components are little, but without them big problems could happen. RideTech offers many of these items to help service their shocks and keep their operation at optimum levels. RideTech's shock bushing washers are manufactured from steel for the poly bushings on their 1.5 in. smooth body stud mounts.
Not Yet Reviewed
$1.99
Bilstein offers a variety of replacement components for your suspension—including these shock boot adapters. They're available in a variety of sizes for fitment on many applications.
( 1 )
$4.99
Bilstein B1 Suspension hardware kits are direct replacements for component kits originally included with Bilstein products. These components are designed for use only with Bilstein products and will help you get back on the road or trail quickly.
( 2 )
$9.99
Gabriel offers mounting hardware such as snap ring sleeves, retaining washers, and more to help you finish your shock installation project. Most components are universal; secure your suspension parts with Gabriel recommended hardware.
( 1 )
$2.99
—
$8.99
Mount a coilover type spring to your QA1 shocks with these coilover sleeves. QA1 sleeves are manufactured from high-quality aluminum and install easily without any modifications. Available for a variety of QA1 coilover shocks, the QA1 coilover sleeves will keep your springs mounted solidly and give you the range of adjustment that you have been looking for.
( 17 )
$10.95
KYB shock mounting kits can help you properly install your shock absorbers by providing necessary bushings, fasteners, and washers. This can help save you money by allowing you to buy just the shock absorbers you want, versus an entire kit with excess parts you may not need. KYB shock mounting kits are ideal for the economic-minded DIY mechanic or those just needing some extra mounting components.
Not Yet Reviewed
$5.83
Eibach Pro-UTV crossover rings are precision CNC-machined from anodized aluminum for accuracy on your Fox and Walker Evans shocks. They allow you to fine-tune your dual-spring setup by creating the "crossover point" or transition between your main-to-tender springs, initiating a dual-rate shock for better handing and ride quality over rough terrain. Structure your dual-spring shocks for increased suspension performance with Eibach Pro-UTV crossover rings.
Not Yet Reviewed
$26.00
—
$30.00
RideTech offers replacement shock knobs used on Ridetech coilovers and Shockwaves and HQ Series shocks. These glass filled nylon rebound knobs allow for easy adjustment of your RideTech shocks. There are two types of damping: compression and rebound. When you decrease rebound damping by turning the adjustment knob counter-clockwise, you allow the shock to extend faster. It feels softer, more supple, and livelier. When you increase rebound damping by turning the adjustment knob clockwise, you make the shock extend slower, so it feels stiffer, more supportive, and more planted.
Not Yet Reviewed
$2.00
Allstar Performance shock protectors are designed to slide over your aluminum threaded body shock to protect against wear from the spring. Offered in either durable plastic or polyurethane construction, the covers are available in various lengths and diameters. They can be cut to the length needed for your application.
Not Yet Reviewed
$14.99
Some shock components are little, but without them big problems could happen. RideTech offers many of these items to help service their shocks and keep their operation at optimum levels. RideTech's shock knob Torx screws are made from stainless steel and used to fasten the rebound knob to the shock mount. They work with all current RideTech coilovers, Shockwaves, and shocks.
Not Yet Reviewed
$2.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
