Floor Jacks, Transmission Jacks & More

Summit Racing™ Tall Transmission Jacks

Make your next transmission removal or installation a lot easier with our 1,000 lb. capacity tall transmission jacks. These hydraulic jacks stand 50 1/4 in. high and can be raised to a maximum height of 70 1/4 in. They feature a durable steel frame, four adjustable load support arms, and four swivel casters, so they're easy to move.

3.63 out of 5 stars ( 35 )

$209.99

Summit Racing™ Aluminum Hydraulic Floor Jacks

Our Summit Racing™ aluminum hydraulic floor jacks are made of strong, lightweight aluminum, but their lifting capacity is anything but lightweight. These jacks have been tested to meet ASME PASE-2019 safety standards.They feature a rapid-rise low-profile front roller for quick, accurate placement and have a rotating rubber saddle pad to prevent marring.

4.75 out of 5 stars ( 120 )

$249.99

—

$259.99

Summit Racing™ 3 Ton Steel Low Profile Floor Jacks

Our Summit Racing™ 3 ton steel low profile floor jacks can fit under vehicles that other jacks cannot. Their low profile construction can go as low as 3.3" and are built to withstand the demands of professional shop use. They feature a dual piston design with quick lift pump action, and are constructed from high-grade steel with a powder coated finish and ball bearing rear casters for superior mobility across your workshop or garage floor. Buy with confidence knowing that these jacks have been tested to meet ASME PASE-2019 US safety standards.

4.2 out of 5 stars ( 5 )

$179.99

Summit Racing™ Floor Transmission Jacks

When you're not working with a lift, these all-steel Summit Racing™ floor transmission jacks will help you get your transmission in and out with ease. These all-steel jacks can be adjusted in a wide range of heights to suit your needs with the hydraulic hand pump. The jacks also feature four load support arms with a safety chain to keep your transmission positioned securely on the jack.

3.88 out of 5 stars ( 17 )

$204.99

—

$418.99

Sunex Tools Telescopic Transmission Jacks

Sunex Tools telescopic transmission jacks allow you to efficiently remove, install, and transport transmissions and transfer cases on vehicles supported by lifts. They feature a universal saddle that has four ratcheting arms to quickly adjust to the transmission pan shape and a tie-down chain to secure the load. Wide base legs with swivel caster wheels keep Sunex Tools telescopic transmission jacks stable and easy to maneuver.

4.43 out of 5 stars ( 23 )

$384.99

—

$1,049.43

Sunex Tools Air/Hydraulic Telescopic Transmission Jacks

Sunex Tools air/hydraulic telescopic transmission jacks are designed for use in the installation, removal, and transportation of transmissions and transfer cases on vehicles that are supported by lifts. These jacks feature foot-activated pump and release pedals for hands-free ram raising and slow, controlled load lowering. Lowered telescopic rams enable the transmission to be moved from the jack to the work table and extend to reach a maximum height of 74 in. Their universal saddles with four ratcheting arms adjust quickly to the transmission pan configuration with a nylon tie-down to secure the load. Sunex Tools air/hydraulic telescopic transmission jacks are made with an overload safety valve, preventing them from being used beyond their rated capacity. These jacks feature a wide base with swivel casters on the legs and polyurethane tread wheels for stable, easy maneuvering. Locking caster wheels prevent the jacks from moving when they're at your desired location.

4.55 out of 5 stars ( 11 )

$1,287.36

AC Hydraulic DK13HLQ Floor Jacks

AC Hydraulic DK13HLQ floor jacks are a high lifter with a long reach—ideal for cars with low clearance. Built with a wide and robust frame made of high-strength steel, the jacks combine the convenience and safety features to ensure a positive and safe experience for operators. DK13HLQ floor jack features: * Wide and robust frame made of high-strength steel * Extremely high-lift while maintaining low profile access—ideal for cars with low clearance * Very low minimum height of only 80 mm * Precise and safe lowering of vehicle * Fitted with quick-lift pedal for easy reach of lifting point * Manual release for optimal safety when lowering * Noiseless wheels incorporating a polyurethane central O-ring offers maximum surface protection

5.0 out of 5 stars ( 2 )

$637.60

OEM Automotive Tools Telescopic Transmission Jacks

OEM Automotive Tools telescopic transmission jacks and a good hydraulic lift take the hassle out of pulling your vehicle's transmission. These heavy-duty steel jacks feature strong safety chains, tilt-adjustable saddles, and four heavy-duty castors on a wide base. The jacks come in handy for many uses around the shop, and their manual hydraulic systems make lifting and lowering items smooth and seamless. Whether they're being used for pulling, test fits, or installing, OEM telescopic transmission jacks make the job easier. They're available in models with different height ranges.

4.79 out of 5 stars ( 14 )

$449.00

—

$1,099.99

Powerbuilt Unijack Bottle Jacks

Powerbuilt Unijack bottle jacks combine a bottle jack with a jack stand in one unit. These bottle jacks feature factory-approved lifting points to prevent damage, and an ingenious design that both safely lifts and securely holds a unibody vehicle using a single lift point. They offer both concave and flat lifting surfaces to accommodate a wide variety of lift points. Powerbuilt Unijack bottle jacks eliminate the cost of a floor jack, plus they are easier to lift, move, and store. Features include: * Patented design * Lifts and supports a variety of vehicles with 4000 lbs. capacity * Safe for lifting unibody and body-on-frame vehicles * Wide flat base adds stability and reduces "sinking" on softer surfaces * Meets or exceeds ASME and PALD standards * One-year warranty

4.52 out of 5 stars ( 48 )

$72.99

—

$79.99

Sunex Tools 3 Ton Service Floor Jacks

Sunex Tools 3 ton service floor jacks are an affordable solution for the budget-conscious enthusiast who still wants the high quality that Sunex provides! High-carbon steel side plates increase the chassis strength of these 3 ton jacks. These jacks are stable and easily maneuvered, thanks to their wide front wheels and ball bearing mounted rear caster wheels. A 2-piece handle with a knurled hand grip provides non-slip ease of pumping and a longer reach under your vehicle. Overload and bypass safety valves prevent these jacks from being used beyond their rated capacity and prevent ram overextension. Wiper seals protect the hydraulic system from contaminants. Sunex Tools 3 ton service floor jacks are a great choice to handle any automotive repair shop work!

5.0 out of 5 stars ( 2 )

$182.99

—

$326.99

Summit Racing™ 3 Ton Hybrid Aluminum/Steel Floor Jacks

Our Summit Racing™ 3 ton hybrid floor jacks combine the performance and savings you are looking for. They are built from aluminum for weight reduction, and hi-grade steel for strength and value. These jacks feature a dual pistons design with quick lift pump action, and ball bearing rear casters for superior mobility across your workshop or garage floor. A powder coated finish is applied that enhances the jack's durability by protecting against wear and tear, promising years of dependable performance. Buy with confidence knowing that these jacks have been tested to meet ASME PASE-2019 US safety standards.

4.0 out of 5 stars ( 2 )

$199.99

B-G Racing Formula Quick Lift Jacks

B-G Racing Formula Quick Lift jacks are available in either a small reach or long reach model. Both are engineered and manufactured with durability and ease of use in mind, and are suitable for a wide range of vehicles. These jacks feature a very low closed height and are designed to locate beneath the differential and front or rear chassis members, raising the car to a fixed height in one single swift movement. A safety locking device on both jack models is easy to use, ensuring the handle cannot be raised unless intended. Order the model to best suit your application. Features for small reach and long reach B-G Racing Formula Quick Lift jacks include: * Produced from high-grade mild steel * Includes an extra-long ergonomic handle for excellent leverage, with a yellow tip to enhance visibility * Nylon wheels allow easy maneuverability * Both jack models are available in a choice of gray or red powdercoat finish for longevity

4.5 out of 5 stars ( 2 )

$323.99

B-G Racing Rally Quick Lift Jacks

B-G Racing Rally Quick Lift jacks feature an extra support leg, extended handle holder and handle—enabling them to lift a higher load capacity the Formula Quick Lift jack models. Engineered and manufactured with durability and ease of use in mind, these jacks are suitable for a wide range of vehicles. The Rally Quick Lift jacks have a very low closed height and are designed to locate beneath the differential and front or rear chassis members, raising the car to a fixed height in one swift movement. They also feature a simple safety locking device, ensuring the handle cannot be raised unless intended. Features and design details of Rally Quick Lift jack models: * Produced from high-grade mild steel * Includes an extra-long ergonomic handle for excellent leverage, with a yellow tip to enhance visibility * Nylon wheels to allow easy maneuverability * Available in gray or red powdercoat finish for longevity

3.0 out of 5 stars ( 2 )

$386.99

Sunex Tools 2 Ton Lowrider Service Jacks

If you're looking for a high-strength floor jack that can lift everything from low-riding sports cars to SUVs and pick-ups, then Sunex Tools has you covered with the 2 ton Lowrider service jacks. Their low-profile design is consistent throughout the entire 18 in. chassis, allowing full reach beyond pinch welds--and with rapid-rise technology, it takes only 6 1/2 quick pumps to reach the 24 in. maximum height. Sunex Tools 2 ton Lowrider service jacks are built with rollers on the front and swivel wheels on the rear for easy maneuverability.

4.7 out of 5 stars ( 44 )

$373.99

Summit Racing™ 3 Ton Steel Floor Jacks

Our Summit Racing™ 3 ton steel floor jacks are built to withstand the demands of professional shop use. They feature a dual piston design with quick lift pump action. These jacks are constructed from high-grade steel with a protective powder coated finish, and ball bearing rear casters for superior mobility across your workshop or garage floor. Buy with confidence knowing that these jacks have been tested to meet ASME PASE-2019 US safety standards.

5.0 out of 5 stars ( 4 )

$159.99

B-G Racing Formula Rear Swivel Jack

B-G Racing Formula rear swivel jacks are designed to fit any single-seater with jack-locating lugs on the gearbox or rear wing. They're engineered for strength and maneuverability; the jack height is adjustable, and they utilize large diameter wheels. Formula rear swivel jacks are manufactured from high-grade mild steel with a durable gray powdercoat finish for longevity. Other enhanced features include a T-bar grip for quick and accurate positioning beneath the car, and a detachable handle for ease of transportation and storage.

4.33 out of 5 stars ( 3 )

$296.99

AGM Products Manual Jack-Sport Systems

Did you know getting stuck in the middle of nowhere is a rite of passage for any true adventurer? But struggling with a bulky, unreliable jack … that's just unnecessary suffering. Meet the Manual Jack-Sport Systems from AGM Products—built with the DNA of AGM's Pro Series jacks but at a price every adventurer can afford. Whether you're tackling trails, swapping tires, or handling repairs in the wild, this jack gives you the power to lift by hand, with a drill, or with your impact gun. No more wrestling with awkward angles—the 90-degree drive keeps you clear of fenders and body panels so you can work smarter, not harder. Bottom line—stop struggling and start lifting. Get your Manual Jack-Sport today! Key features and benefits of the Manual Jack-Sport Systems: * Versatile lifting—you can lift by hand, with a drill, or with an impact gun—no CO2 cartridges, no heavy hydraulics, just pure, reliable lifting power * Stay clear, stay safe—the 90-degree drive keeps your hands away from body panels and fenders, so you can focus on the lift, not on scratching your rig * Adventure-Ready—they are compact and lightweight yet built tough enough to handle whatever terrain you're conquering * Unshakable stability—GroundLoc patented pad design compresses soft terrain for a solid foundation, so you don't sink in sand, mud, or loose dirt * Built to last featuring AGM's ToughThred ACME screw technology for smooth power transfer and extreme durability in harsh conditions * Patented VersaLift System—the interchangeable mounts and accessories let you tackle multiple lift points with ease—because every adventure is different * Weight lift capacity up to 2,000 lbs.

Not Yet Reviewed

$399.99

Hi-Lift Jack Company X-Treme Jacks

Hi-Lift X-Treme jacks are for the serious Hi-Lift user, made to stand up to the harshest conditions. Their charcoal metallic powdercoated finish provides a truly unique look that separates them from the standard Hi-Lift jacks. They also feature gold zinc coated hardware and a unique winch-clamp spreader attachment. Hi-Lift X-Treme jacks also have a gold zinc coated handle to ensure the greatest rust resistance from extreme use.

4.77 out of 5 stars ( 84 )

$133.99

Powerbuilt Professional Floor Jacks

Powerbuilt Professional floor jacks are dependable, innovative, and affordable. Need to do a few repairs under your car? No worries. Powerbuilt Professional jacks are built with a strong, heavy-duty, flanged steel frames and are available in capacities and lifting heights to raise your repairs safely and securely. They also offer low-profile models for cars too low for regular jacks. Features include: * Long handle for added reach * Precision 360 degree rear swivel casters allows easy maneuvering * Durable gear-drive or U-joint release valve (depending on model) * Meets or exceeds ASME and PALD standards * One-year warranty

4.0 out of 5 stars ( 6 )

$197.99

—

$267.99

Powerbuilt All-In-One Jack Stand Bottle Jacks

Powerbuilt All-In-One jack stand bottle jacks are the world's first and only portable jack designed to safely lift and hold both regular and unibody cars and trucks. All unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it's challenging to properly lift and hold a unibody vehicle—because once the vehicle is raised with a jack, there's no space left to add a jack stand. The Powerbuilt All-In-One solves this problem with an ingenious design that safely lifts and securely holds a unibody vehicle using a single lift point. The unijack offers both concave and flat lifting surfaces, accommodating a wide variety of lift points no matter what type you need.

5.0 out of 5 stars ( 7 )

$80.99

Allstar Performance Aluminum Pit Jacks

Allstar Performance aluminum pit jacks feature a low profile to roll under the lowest slung race chassis. Constructed from high-quality aluminum, they incorporate a patented hydraulic system, along with a 2-piece handle with a spring detent to stop it at the 12 o'clock position. Allstar Performance aluminum pit jacks roll easily on heavy-duty rear caster wheels.

5.0 out of 5 stars ( 1 )

$599.99

—

$645.94

Powerbuilt U-Jack Floor Jacks

Powerbuilt U-Jack floor jacks eliminate the hassle of placing a jack stand at a factory-approved lift point on your car or truck. Each U-Jack unit features a patented saddle with a slot that fits the mast saddle of virtually any jack stand on the market. Simply jack up your vehicle with U-Jack, place a jack stand in the saddle slot, then lower and remove the U-Jack. It's that simple! When you're finished, just reverse the process. They can also be used just like a regular floor jack. Save time and hassle when doing your own service and repairs—like brake jobs, tire rotations, and wheel swaps—with Powerbuilt U-Jack floor jacks. Additional features include: * Lifting range from 4 1/2 to 18 3/4 in. * 2-ton lift capacity * Strong ultra-wide chassis for extra stability * Stylish, dependable, and affordable; Powerbuilt products meet or exceed ASME and PALD standards

4.6 out of 5 stars ( 5 )

$281.99

Performance Tool Low-Profile Service Jacks

Performance Tool low-profile service jacks are designed for cars and light-duty trucks. They feature a low-profile design that allows them to get under lowered cars and they have a lift range of 2 3/4 to 20 1/2 in. They also have an extended side flange for strength and durability, as well as a dual-position rubber saddle pad for faster lifts. If you're looking for a high-quality jack for your dropped ride, Performance Tool low-profile service jacks are the perfect jacks for you.

4.66 out of 5 stars ( 61 )

$224.99

—

$285.99

AC Hydraulic VL6 Transmission Jacks

In addition to being used for the transmission, the AC Hydraulic VL6 transmission jacks for cars and trucks are suitable for other lifting operations, such as the mounting of springs, fuel tanks, exhaust pipes, and more. Attempting to install a transmission by hand, or through some other sketchy method can be not only exhausting, but dangerous. To help alleviate these issues use the VL6 transmission jacks by AC Hydraulic. VL6 transmission jack features: * Built with hard chromium plated rams and a high-quality strength steel frame * Pedal operated pump leaving both hands free for working * Precise adjustment for positioning of transmission * Hand operated release for optimum safety whilst lowering the vehicle * Hard chromium plated piston rod and pump piston for long life * Built-in safety valve and hand operated release for optimum safety whilst lifting and lowering * Galvanized support saddle base frame * Sturdy swivel castors for optimum stability and maneuverability * Also suitable for many other lifting operations such as mounting springs, fuel tanks, exhaust pipes etc.

Not Yet Reviewed

$533.60