Availability
Showing In Stock Items. Show All 34 Items.
Summit Racing™ valve seals are your solution to preventing oil from seeping down into your valve guides. Made from a high-temperature Viton® fluoroelastomer material, these positive stop seals are built to last.
( 10 )
$15.99
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 190 )
$6.95
—
$56.95
BTR LS valve stem seals are designed for stock powdered metal and bronze guides; some include a built-in locator for single springs, and some use separate locators. The valve stem seals allow a carefully defined amount of engine oil from the cylinder head into the combustion chamber—to lubricate the rotating valve stem in the valve guide. BTR valve stem seals are produced from high performance materials for increased part life and lower wear. Order the set recommended for your year/make and engine application.
( 22 )
$1.99
—
$19.99
Fel-Pro valve stem seals are available in a variety of sizes, styles, and materials. These small components perform a valuable role—controlling the lubrication of the valve stems as they slide in the valve guide. Too little oil causes stem and guide wear; too much increases oil consumption and can cause a buildup of carbon. This can lead to valve seat damage and early valve grind. Order the replacement set recommended for your vehicle and engine application.
( 107 )
$10.99
—
$141.99
Trick Flow® valve seals are posi-stop seals made from Viton® fluoroelastomer for a long-lasting seal. They prevent oil from leaking into the valve guides and are good for use with dual springs.
( 37 )
$1.99
—
$30.99
Any time that you have your heads reworked, replacing the valve stem seals would be a good idea. Replace yours with Howards Cams Viton® valve seals. These valve stem seals have excellent heat and fuel resistance properties and help to keep oil out of the combustion chamber. Howards Cams Viton® valve seals offer quality with value.
( 16 )
$20.99
Dart valve stem seals are designed to control the lubrication of the valve stem as it slides in the valve guide. Too little oil causes stem and guide wear. Too much oil increases oil consumption and can cause a buildup of carbon, leading to valve seat damage and an early valve grind. Available in different styles and sizes, Dart valve stem seals are just what you need to take control of your oil.
( 12 )
$1.04
—
$2.35
Mahle Original valve stem seals control the lubrication of the valve stem as it slides into the valve guide. Too little oil contributes to stem and guide wear. Too much oil increases oil consumption and can cause a buildup of carbon, leading to valve seat damage and early valve failure, as well as reduced engine performance and emission failures. Mahle Original valve stem seals ensure dependable performance and superior service life.
( 15 )
$4.99
—
$39.99
Manley Viton® valve stem seals are designed to keep oil out of the combustion chamber. They are manufactured from special Viton® material for maximum control and durability throughout the entire rpm range. The seals feature a special smaller design to allow for clearance in small inside-diameter valve springs.
( 18 )
$2.06
—
$16.38
AFR replacement valve stem seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. They are manufactured from Viton® to give you the tightest seal possible. These replacement valve stem seals are designed to work in all AFR aluminum cylinder heads.
( 9 )
$21.00
—
$35.70
These Brodix Cylinder Heads valve stem seals are designed to keep your valves oiled and working correctly. They feature positive-stop PTFE construction for maximum durability.
( 14 )
$3.99
—
$26.99
Edelbrock valve seals are umbrella-shaped for dual-purpose use. Made from high-temperature Viton® material, they help to prevent oil seepage down the valve guides.
( 24 )
$39.95
—
$57.95
AFR offers valve seals for SBC/SBF Enforcer cylinder head applications from 1955 and up. The valve stem oil seals are made from Viton© rubber—and are designed to original specifications, ensuring proper fit and performance.
( 1 )
$2.10
These Chevrolet Performance valve stem seals control the lubrication of the valve stem as it slides into the valve guide. Too little oil contributes to stem and guide wear, and too much oil increases oil consumption and can cause a buildup of carbon. This leads to valve seat damage and early valve failure, as well as reduced engine performance and emission failures. These Chevrolet Performance valve stem seals ensure dependable performance and superior service life.
( 5 )
$15.99
—
$40.99
Help prevent oil seepage down the valve guides with Ford Performance Parts valve stem seals. Made of high quality nylon, these seals are a positive stop design.
( 7 )
$34.99
Valve stem seals from Cometic provide superior sealing to keep oil out of combustion chambers for improved engine efficiency and performance. Cometic valve stem seals are comprised of a high-quality materials that's extremely resistant to heat, oil additives, and abrasion. These seals are manufactured to precise specifications ensuring they remain in place and deliver excellent long-term durability.
( 11 )
$26.71
—
$89.16
ACDelco GM Genuine Parts engine valve stem oil seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
Not Yet Reviewed
$5.99
Engine Works Viton© valve stem seals are available in a variety of diameters to ensure proper fit and performance. These replacements allow a controlled amount of oil to lubricate the valve stem as it moves in the valve guide. Too little oil causes stem and guide wear; and too much oil causes carbon buildup—leading to valve seat damage, decrease in efficiency, increased emissions, catalytic converter degradation, and excessive oil consumption. These problems can also cause issues with compression, resulting in poor combustion and power loss. Valve stem seals should generally be replaced every 150,000 miles or less. Viton© (synthetic rubber and fluoropolymer elastomer) seals are the best choice to maintain your vehicle.
( 1 )
$13.71
These Howards Cams small o.d. valve seals offer a small outside diameter for greater spring clearance. A must for triple springs, they're made of fluoroelastomer high-temperature material. They're metal-clad with a rigid chimney.
( 5 )
$1.99
—
$14.99
Howards Cams Ultimate Duty premium PC-type seals are made of a space-age material that is tolerant to pump gas, alcohol, and nitromethane. Temperature-tolerant to 350 degrees, they are self-lubricating and offer controlled radial tension during changes in operating temperatures. Howards Cams Ultimate Duty valve seals are color-coded and control oil while lubricating the valve guide. Additional features include: * Space-age DuPont fluoro-polymer material * Design allows for very small amount of oil for guide/stem lubrication * Install with fingers
( 24 )
$1.99
—
$46.99
Replace your old or worn valve seals with these umbrella valve seals from Howards Cams. These quality rubber umbrella seals move oil away from the guides without losing necessary lubrication of the valve guide. Howards Cams umbrella valve seals will help you control the oil.
( 2 )
$6.99
Mopar Performance valve seals are manufactured from high-temperature Viton® material. They come in a full or semi-umbrella shape for best dual-purpose use, and help prevent oil seepage down the valve guides.
Not Yet Reviewed
$24.79
These high performance valve seals from Allstar Performance have spring-loaded wipers for maximum oil control. These valve seals are a must for keeping unwanted oil from entering the combustion chamber through the clearance in the valve guides. Machining is required for most installations.
( 3 )
$30.99
Howards Cams Posi-Stop valve stem seals are offered in a couple of choices. Their Posi-Stop Viton® seals offer high-quality, high-temperature sealing that controls oil flow with no machining of guide required. Howards small O.D. valve seals are made from Fluoro elastomer high-temperature material with a rigid metal-clad chimney. Their small outside diameter provides greater spring clearance and are a must for triple springs.
Not Yet Reviewed
$1.99
—
$26.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
