Availability
Showing In Stock Items. Show All 55 Items.
What AVS Motorsports Speedcover kits can do for your LS engine can only be limited by your imagination! The main components are made from a special high-temperature resistant automotive polycarbonate and feature 6061 billet aluminum cover inserts. AVS Speedcover kits are compatible with any automotive paint or hydro dipping for endless customizing capabilities. What is your LS Performance styling vision? AVS Speedcover kits include: * Valve covers * Intake cover * Cover inserts * ARP mounting hardware * Billet aluminum oil filler * Aluminum cylinder stand-offs
( 1 )
$949.00
Ford Performance Parts 2018-19 Mustang GT Coyote engine covers are designed to finish off the look of your Coyote-powered muscle car. These decorative plastic covers mount over the fuel rails, injectors, and engine wiring. The covers include an oil filler neck to allow you to reuse the engine oil cap. They also feature foam isolators to help block out engine noise. Dress-up your engine bay with an engine cover kit from Ford Performance.
Not Yet Reviewed
$181.99
Love your LS engine but hate the sight of coil packs? Top Street Performance LS ignition coil covers will hide the coil packs and dress up your engine bay. They are composed of TIG-welded 6061 T-6 aluminum, available polished or with a clear or black powdercoat finish, and come complete with mounting hardware and a billet aluminum oil filler neck and cap. Conceal unsightly coils with TSP LS ignition coil covers.
( 3 )
$167.99
—
$202.46
Roto-Fab LS engine covers have become quite popular for LS engine swap customers. They're designed to maximize clearance between the covers and engine components, such as coils and fuel lines. In addition to clearance, the covers will give your engine a slightly higher, bolder appearance in the engine bay. Compatible with the Roto-Fab LS plenum cover, as well as the Roto-Fab billet oil cap, these covers install in minutes without removing the fuel rail or intake bolts. They have front-end caps which are flat across the bottom and extend nearly the full width of the cover. Order the pair recommended for your vehicle.
( 1 )
$469.95
Dress up your LS engine and hide the stock coils with a set of these Eddie Motorsports LS ignition coil covers. Designed to look similar to a Big Block Chevy valve cover, these components mount to the factory coil brackets and come complete with a billet aluminum oil filter extension, screw-in cap, and all of the necessary fasteners. Coil covers are 3.625 in. tall x 19.625 in. long and will fit 4.8L, 5.3L, 6.0L and 6.2L LS engines. They are available in multiple finishes.
( 11 )
$195.00
—
$235.00
Clayton Machine ignition coil covers stylishly hide the LS engine coil packs. Unlike the plastic or fiberglass versions, these covers are machined from 6063 T-6 aluminum and can be ordered in black or grey powdercoated finishes; they're also available unfinished so you can customize them to match your vehicle. The covers fit GM LS engines utilizing existing coil bracket mounting points, and are ideal for LS crate motors. (Unless a cutout is fabricated or aftermarket alternator and brackets are used, they will not clear factory high mount alternators, like those found on Corvettes.) Clayton Machine ignition coil covers can be used with relocated coil packs for a lower profile appearance, and are best suited for aftermarket serpentine pulley systems. Additionally, they're available with or without the oil fill hole.
( 11 )
$310.95
—
$392.95
Ford Performance Parts ignition coil covers dress up 5.0L 4V Ti-VCT Coyote and almost any 4.6L/5.4L/5.8L DOHC engines with coil-on-plug ignition systems. They're available in a variety of finishes and logos—for applications from 1996 and up. Let the competition know you're serious about performance!
( 13 )
$56.99
—
$126.99
These great looking Ford Performance Parts intake manifold covers are guaranteed to spice up the look of your engine bay! They do more than simply scream power--their precision craftsmanship also provides a perfect fit and easy installation. Some are offered as kits that include coil covers. Create some excitement, and maybe even a little envy, every time you pop your hood! Make your car a finished work of art by installing Ford Performance Parts intake manifold covers today.
( 2 )
$139.99
—
$189.99
Dress up your Gen 4 Coyote crate engine compartment with a 2024 Mustang 5.0L engine cover from Ford Performance Parts. These fuel rail and coil covers are manufactured from plastic with a black/silver finish and a black/red logo. Notes: * Fits 2024 Mustang 5.0L * Fits M-6007-M50D and M-6007-M50DAUTO crate engines * Does not fit Gen 1, 2 or 3 Coyote crate engines
Not Yet Reviewed
$90.99
ACDelco GM Genuine Parts engine intake manifold covers are designed, engineered, and tested to rigorous standards—and are backed by General Motors. Made to fit your specific GM vehicle, these replacement air intake components are crafted from the highest-grade materials for correct fit, and dependable, long-lasting service. Make sure your engine breathes properly with ACDelco's selection of top-quality replacement air intake parts.
( 2 )
$72.99
—
$147.99
Summit Racing™ Pro LS ignition coil covers are a great way to dress up your LS engine. These aluminum coil cover sets have a durable powdercoat finish with an etched Summit Racing™ logo to stylishly hide LS engine coil packs. The covers fit GM LS engines utilizing existing coil bracket mounting points and have an oil fill hole to accommodate the oil fill tube. These covers will not clear factory high-mount alternators, like those found on Corvettes, unless a cutout is fabricated or aftermarket alternator and brackets are used.
( 3 )
$330.99
OTB Gear ignition coil covers have taken a page from the classic "old school fins" book. Not only are they great looking, they have some worthwhile features—such as a standoff rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. The covers are mounted with 1/4 in.-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft-grade A356 aluminum, they're available with a natural finish or polished to a very high sheen. Some models feature chromed coils.
( 2 )
$149.00
Chevrolet Performance engine covers give your bay an impressive look when you lift the hood. Several models are available to complement or contrast the exterior color of your Camaro or Corvette. Take your engine compartment to a stylish new level with an attractive cover from Chevrolet Performance.
( 1 )
$84.99
Chevrolet Performance fuel rail covers are designed to give your Corvette engine added good looks under the hood. They are made of a durable, heavy-duty plastic material in black or red finishes.
( 4 )
$94.99
—
$96.99
Roto-Fab plenum covers are a direct replacement for your factory plenum cover. Their carbon fiber hydragraphics finish will customize your engine compartment. They install right over the top of your stock intake manifold, filling space between the two engine covers with a fiberglass plenum cover. These covers look great with any of Roto-Fab's finished engine covers. They are for the center section only. Install time is less than 10 minutes. Their plenum cover is about 1 in. thick, sits right on top of your stock setup, and mounts securely using the four existing studs.
Not Yet Reviewed
$274.95
Ford Performance Parts Boss 302 engine covers are designed to finish off the look of any Coyote-powered vehicle equipped with a BOSS 302 intake manifold. These decorative plastic "shrouds" cover fuel rails, injectors, and wiring. Also, the foam isolators help to block out injector noise. Dress-up your engine bay with an engine cover kit from Ford Performance.
( 2 )
$255.99
ACDelco fuel rail covers are designed to give your engine good looks under the hood. They're made of a durable, heavy-duty plastic material and are available in different finishes. Order the fuel rail covers tailored to fit your application.
( 1 )
$68.99
Moroso coil shield covers improve the look under your hood. Fabricated from thick aluminum with TIG-welded corners, they include a rubber grommet for wire protection. The covers can be polished, chromed, powdercoated, or painted for a custom appearance. Dress up your engine bay with Moroso coil shield covers.
( 7 )
$60.99
Summit Racing™ finned aluminum ignition coil covers offer a nostalgic look for your ride's engine compartment. Not only are they great looking, but they also have some worthwhile features—such as models that fit round canisters and those that fit square TFI-style coils, plus a variety of available finishes. Summit Racing™ finned aluminum ignition coil covers look great on their own or when complemented with other finned covers under your hood!
Not Yet Reviewed
$44.99
—
$91.99
Clean up the look of your engine bay with a "Powered by Ford" engine dress-up kit by Ford Performance! These kits are designed for year-specific Mustang models equipped with a Coyote 5.0L TiVCT engine. The decorative covers hide your fuel rail, injectors, and wiring—and the trim brackets sport attractive "Powered by Ford" lettering. To ensure a finished look under the hood, install a Ford Performance "Powered by Ford" engine dress-up kit! Kit features and parts include: * Fuel rail driver side trim (bracket) * Fuel rail passenger side trim (bracket) * PVC hoses * Necessary hardware to facilitate installation
( 2 )
$154.99
California Pony Cars NXT Gen fuel rail covers will give your Mustang GT or Bullitt engine compartment show-winning style. This set of silver finned rail covers are made from durable OEM-grade heat-resistant material with a gunmetal gray finish. Kit includes: * Two fuel rail covers (driver and passenger side) * Two stainless steel mounting brackets (driver and passenger side) * Hardware screws * Allen wrench * Installation instruction sheet
( 10 )
$264.99
Eddie Motorsports engine covers give your bay an impressive look when you lift the hood. Several models are available to complement or contrast the exterior color of your performance vehicle. Take your engine compartment to a stylish new level with an attractive cover kit from Eddie Motorsports.
( 2 )
$258.00
Edelbrock LS1/LS6 aluminum ignition coil covers are a great, and affordable way to dress up Chevrolet Gen III LS Series engines. They are manufactured from cast aluminum and available in a natural, polished, or black powdercoated finish. These LS1/LS6 coil covers eliminate the need for the factory coil pack bracket by mounting the ignition coil packs directly to the underside of the covers. Install a set of the Edelbrock LS1/LS6 aluminum ignition coil covers and create a clean, custom under the hood look for your ride.
( 5 )
$353.95
—
$492.95
Trick Flow® Box-R-Series intake manifold logo plates are the perfect way to dress-up your Trick Flow® intake manifold. The aluminum plates have a machined Trick Flow® logo, and include self tapping screws for easy installation.
Not Yet Reviewed
$21.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
