BluePrint Builder Series 302W/365HP Bronco Edition EFI Crate Engine and 4R70W Transmission Combos

BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Main caps are 4-bolt * Bore is 4.000 in. * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and OEM-style 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller and TPS breakout harness for integration with controller * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Not intended for use in controlled vehicles. Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility. Show Less