Availability
The driveshaft connects the transmission to the axle of your vehicle. Summit Racing Equipment carries driveshafts for a wide variety of applications, including lightweight...
The driveshaft connects the transmission to the axle of your vehicle. Summit Racing Equipment carries driveshafts for a wide variety of applications, including lightweight aluminum and carbon fiber driveshafts for racing, heavy duty steel driveshafts for off-road and towing activities, and stock driveshaft replacements for daily drivers and restoration projects. They’re all available in a wide range of standard and custom lengths.
The driveshaft connects the transmission to the axle of your vehicle. Summit Racing Equipment carries driveshafts for a wide variety of applications, including lightweight aluminum and carbon fiber driveshafts for racing, heavy duty steel driveshafts for off-road and towing activities, and stock driveshaft replacements for daily drivers and restoration projects. They’re all available in a wide range of standard and custom lengths.
Showing In Stock Items. Show All 50 Items.
Get your hot rod, track car, or daily driver moving with Summit Racing™ aluminum driveshafts. Recommended for applications putting out up to 700 lb/ft of torque, they are constructed from aluminum to reduce overall weight, which translates into more power getting to the wheels where it can do its job! We use the best seamless tubing to ensure the ultimate in strength and rigidly. Whether you are looking for another tenth or two off of your ET, or just better throttle response in your hot rod, Summit Racing™ will take care of you with aluminum driveshafts.
( 200 )
$405.99
—
$469.99
Classic Performance slip shaft drivelines deliver the ultimate in performance. Featuring steel construction, these U-joint style driveshafts are self-adjusting, 33.75 in. collapsed to 36.5 in. expanded. This minimizes wear and tear on the carrier bearing and the rear-end on vehicles where the ride height has been altered. They're recommended for a variety of Chevy cars and trucks from the 1950s, '60s, and '70s.
( 13 )
$258.99
Ford Performance Parts 2005-10 Mustang GT one-piece driveshafts deliver peak endurance and optimum strength in increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 52.598 in. (1,336 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Will not fit automatic transmission * Off-road use only
( 15 )
$689.99
Ford Performance Parts driveshaft assemblies feature reduced overall weight and rotating mass that frees up horsepower and provides quicker acceleration, higher speeds, and lower ETs. They feature heavy-duty, 6061 aluminum, seamless drawn tubing and include high-strength U-joints or flange yokes. Available for a wide variety of Mustang applications, they are designed for increased horsepower applications to deliver exceptional strength and reliability. Depending on application, features include: * 1330 or stronger 1350 high performance U-joints * 28-spline or 31-spline yokes * 3.5 in. diameter * 0.114 in. or 0.125 in. wall thickness * Spline and slip design allows for installation and suspension movement * Hard plastic boot to keep grease in and water out; protects spline and slip from contaminants * Eliminates the need for a center support bearing * Direct bolt-in * Fully assembled and balanced
( 18 )
$462.99
—
$741.99
Strange Engineering's driveshaft tubes are produced with top-quality chromoly tubing. These seamless tubes offer the perfect foundation for your custom driveshaft needs.
( 10 )
$154.99
Get moving with Summit Racing™ driveshafts. They are drawn-over-mandrel steel tube assemblies with a transmission slip yoke. Our tube and yoke assemblies are available in three transmission joint styles, including various U-joint options for your restoration job. Bolt on Summit Racing™ driveshafts for smooth handling to keep yourself on the road and between the lines.
( 15 )
$311.99
—
$379.99
With Hinson Motorsports driveshafts, the only question you'll be asking yourself is why you didn't do it sooner! Ready to install out of the box, these beauties replace your weak driveshaft with the strength to perform. For better reliability and performance, the modification you need to make is upgrading to Hinson Motorsports driveshafts. Some of the benefits may include: * Dual-pattern differential flange that fits both automatic and manual transmissions (depending on application) * Smoother shifts * Less rotating mass for more horsepower to the rear wheels * Better throttle response * Hardware and thread locker (depending on application)
( 32 )
$889.99
—
$995.00
Dorman driveshafts are designed to replace your factory originals with no modifications. They are manufactured from quality materials and have the stock connections for an easy bolt-in fit. The driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 318 )
$122.50
—
$3,588.99
Factory driveshafts are made from a smaller tube (there are 2 different types) and will flex and bend during hard acceleration, causing the rubber drives to wear out prematurely. The Driveshaft Shop torque tube driveshafts are made from 3 x .125 wall 6061 T-6 aluminum and uses The Driveshaft's own custom machined ends. This ensures that the shaft will not distort or break like the factory units, and offer units rated up to 1000 hp. Choose the driveshaft designed for your vehicle.
( 3 )
$598.48
—
$2,241.40
Big power and lots of traction can twist your stock driveshaft into pieces, so replace it with something better, such as these Inland Empire Driveline high-strength driveshaft assemblies. These 3 in. diameter tubes are custom-drawn for consistent strength. Their forged yokes are welded on using state-of-the-art processes for improved reliability. They're accepted for use in most NHRA and all IHRA classes.
( 21 )
$551.65
—
$590.93
Allow Fastshafts' street stock driveshafts to be your unyielding companion. Take them on a fast and furious trip and let their quality components and exacting manufacturing tolerances take you to the limit! They build their strong street stock driveshafts using only the best chromoly or DOM 1020 "driveshaft-quality" tubing on the market. They also expertly balance their driveshafts using only the finest balancing equipment, which includes the most technologically advanced equipment available. Fastshafts' street stock driveshafts are serious components that are built for serious drivers. Options available include: * A large rear or conversion joint * A long transmission slip yoke * An extra-long transmission slip yoke * No slip yoke
( 30 )
$287.99
—
$328.99
Ford Performance Parts 2007-12 Mustang GT500 one-piece driveshafts deliver peak endurance and optimum strength for increased horsepower applications. Ready to bolt on right out of the box, these direct-fit driveshafts provide reduced overall weight and rotating mass for improved driving performance with quicker acceleration. Features include: * 51.653 in. (1,312 mm) overall length (face of transmission flange to face of rear end flange dimension) * 3.5 in. diameter 6061-T6 aluminum tubing with .125 in. wall thickness provides exceptional strength and reliability * 1350 Series Dana Spicer 5-1350X solid body universal joints are stronger than the 1330 Series available for Mustangs * Comes with 1350 Series flange yoke to bolt to the transmission * Comes with 1350 Series flange yoke to bolt to the OE Mustang rear end flange (no adapter required) * Fully assembled and balanced * Spline-and-slip design allows for installation and suspension movement * Hard plastic boot keeps grease in and water out to protect spline and slip from contaminants * Eliminates the need for a center support bearing * Off-road use only
( 1 )
$854.99
Strange chromoly fully assembled driveshafts are designed to handle the high horsepower of today's engines. And, they're offered at mild steel prices! Their seamless chromoly shafts are heat-treated and feature 1350 or 1480 Spicer precision, self-lubricating U-joints. Strange fully assembled driveshafts include weld ends that are properly phased and installed. Plus, every shaft is electronically balanced and has a total indicated runout of less than .008 in.! DOM shafts are carefully MIG-welded with Spicer HD weld ends and U-joints. The seamless chromoly shafts are meticulously TIG-welded and fitted with Strange forged chromoly weld ends and Spicer U-joints. Buy a driveshaft made for the harshest conditions--Strange chromoly fully assembled driveshafts.
( 59 )
$409.99
Cardone remanufactured driveshafts are 100 percent dynamically balanced at 3200 rpm for vibration-free operation and increased joint life. They're engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Shafts are measured and straightened, slip yokes are lubricated, and new universal joints are installed to ensure optimum performance and durability. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. OE fit, form, and function come together with economical pricing in Cardone remanufactured driveshafts. Order the model recommended for your vehicle.
( 30 )
$147.50
—
$761.99
Summit Bucks
ACDelco driveshafts are designed to replace your factory originals with no modifications. They're manufactured from quality materials and have the stock connections for an easy bolt-in fit. These driveshafts are available in various lengths, diameters, and materials for many auto, truck, and SUV applications.
( 6 )
$364.99
—
$895.99
Whether you're an amateur racer or a passionate motorsport enthusiast, PEM Racing's circle track driveshafts are built to take your racing game to the next level! They're manufactured from quality materials and are available in various lengths and diameters. Replace your weak driveshaft with the strength to perform and enjoy professional-grade performance without breaking the bank with one of these circle track driveshafts from PEM Racing. Select the driveshaft designed for your application needs.
Not Yet Reviewed
$195.99
—
$332.99
Trail-Gear heavy-duty driveline kits will move you! The splines are 42 percent larger, and the spline section is nylon-coated to prolong many years of use on the trail. These kits come with a heavy-duty U-joint installed and full circle retaining rings to securely hold the U-joint in place. Whether you're on the track or trails, get things in motion with Trail-Gear heavy-duty driveline kits.
( 2 )
$399.99
USA Standard Gear driveshafts are high-quality, direct replacement units to repair your binding, bent, or rusty driveshaft. This critical component keeps the power flowing from transmission or transfer case to your differential. Order the model recommended for your vehicle and engine application. Features include: * 100 percent new components * Slip yokes and U-joints are lubricated with high-temperature grease * Fully assembled for simple out-of-the-box replacement * USA Standard "Perfect Fit" driveshafts are guaranteed for proper fitment and easy installation * Strengthened over common, OE-replacement shafts to prevent failure * Dynamically balanced to ensure smooth operation and long life
( 6 )
$224.50
—
$919.99
Motive Gear Ten Factory driveshafts are precision-forged for quality and performance. They come fully assembled and are designed to handle abuse, both on and off-road. Motive Gear Ten Factory driveshafts feature 4130 chromoly tubing for strength and durability, with 1310 or 1350 precision U-joints and black oxide coating. They're electronically balanced to the highest tolerances to provide a vibration-free ride. Available for front and rear, Ten Factory driveshafts include their famous, real-world 10-year warranty. Order the model recommended for your vehicle.
Not Yet Reviewed
$345.59
—
$1,037.68
All Balls Racing Stealth drive prop shafts are dynamically balanced to reduce noise, vibration and lengthen the time between servicing. These fully assembled prop shafts feature phased pairs that include a carrier bearing or a one-piece design to reduce cost, ease assembly, and provide a complete ready-to-install repair solution right out of the box. All Balls Stealth replacement driveshafts are designed with the same dimensions as the OEM units for guaranteed fitment—and also feature greaseable U-joints for increased life. Order the model recommended for your UTV application.
( 2 )
$239.35
—
$739.05
Want to eliminate vibration issues? A good choice is Rough Country CV driveshafts. Available for many trucks, SUVs, and Jeeps, each package contains a stronger, better quality, extended CV driveshaft to promote better geometry for your lifted vehicle. Most kits also include flanges/yokes and hardware. Choose the driveshaft designed for your vehicle.
Not Yet Reviewed
$420.99
You were wise to get a slip-yoke eliminator kit and CV-style driveshaft for safer off-road travel. When age, excessive abuse, or damage destroys the original shaft, replace it with an RT Off-Road driveshaft. These steel double cardan (CV) style 2-piece driveshafts use 1310 Series replaceable U-joints to keep everything moving—and include three grease fittings. RT Off-Road driveshafts are the unsung heroes of travel, and they're available for nearly 700 Jeep applications from 1987 and up.
( 2 )
$411.99
Stock driveshafts get power to the axles, but they aren't designed for tough off-road use. Yukon Gear & Axle performance driveshafts feature stronger tubing to help prevent bending or wear that could cause the shafts to become unbalanced. They include heavy-duty hardware, transfer case yokes, and either 1310 or 1350 U-joints. For better off-road protection, upgrade to Yukon Gear & Axle performance driveshafts, available in many sizes and options for applications from 2007 and up.
( 1 )
$572.99
—
$1,300.99
Sikky Manufacturing LSX swap driveshafts are strong one-piece units available in steel or aluminum. They are fitted with high-strength U-joints and are suitable for LS T56 transmissions. Your Sikky driveshafts will come with their Limited Lifetime Warranty and peace of mind.
Not Yet Reviewed
$539.99
—
$1,999.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
