Availability
Expand your intelligence with additional sensors for your data acquisition system, like air/fuel ratio, rpm, temperature, and pressure sensors, plus GPS antennas. Summit...
Expand your intelligence with additional sensors for your data acquisition system, like air/fuel ratio, rpm, temperature, and pressure sensors, plus GPS antennas. Summit Racing also carries all the extra cables and wiring kits you might need, plus mounting solutions, displays, and memory expansions.
Expand your intelligence with additional sensors for your data acquisition system, like air/fuel ratio, rpm, temperature, and pressure sensors, plus GPS antennas. Summit Racing also carries all the extra cables and wiring kits you might need, plus mounting solutions, displays, and memory expansions.
Showing In Stock Items. Show All 200 Items.
Looking for a complete monitoring package? Racepak IQ3D Drag Dash bracket bundles combine their popular IQ3 Drag logger dash with the most common V-Net sensors and V-Net extension cable to meet the needs of today's bracket racers. They are compatible with a long list of ECU systems. Racepak bracket bundles include: * IQ3D Drag Dash * Wiring harness (includes 2 programming buttons) * Driveshaft sensor (Note: driveshaft collar sold separately) * Oil pressure sensor * Water temperature sensor * Carburetor fuel pressure sensor and V-Net module * Transmission temperature sensor and V-Net module * 6 ft. V-Net cable * USB programming cable * Racepak Datalink II software * MicroSD card and reader
( 2 )
$2,349.95
Racepak IQ3s displays are complete replacements for your factory dash cluster. The digital gauges provide a visual for speed, turn signals, fuel level, high beam, parking brake, time, odometer, trip, and much more. Plus, IQ3s displays can connect to Racepak's optional GPS module, where mechanical speed input is not available. And, last but not least, they look fabulous! Racepak IQ3s street dash digital gauge feature points include: * Display standard road functions * Display up to 28 inputs via four pages * Blue backlight * Gear indicator * Eight user-defined alarms * User-defined 5-character sensor input names * User-defined shift light output * Shielded, low-luster display for sunlight viewing * Metric and English capable * CAN-based and OBD2 compatible * Connect to any of Racepak's V-Net data loggers
( 6 )
$1,299.95
Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.
( 5 )
$139.95
These accessories from Innovate are designed to work with your Innovate air/fuel ratio monitor. They are perfect for upgrading your current monitor or for replacing worn-out components.
( 42 )
$31.99
—
$87.99
HalTech's vast array of data acquisition components includes the TCA-8 Eight Channel Thermocouple Amplifier--a direct plug-and-play, compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU harness, CAN connector, or multiple CAN device installation using an Elite 4 Port CAN HUB. * Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4-ft., Quick Start Guide * Suits: Elite and NEXUS Series ECUs only
Not Yet Reviewed
$549.00
With 15 soft touch, ergonomically designed buttons, the HalTech CAN keypad is easy to configure and use. It's a plug-and-play control solution for your HalTech system. The keypad is suitable for NEXUS and Elite devices only; not compatible with Platinum or earlier ECUs. Includes: 15-Button Keypad (3x5), Adaptor Harness DT-4 to DTM-4, DTM to DTM Cable -1200mm, Label Set, Mounting Nut and Washer Kit
Not Yet Reviewed
$435.00
Racepak V-Net connector modules are used to convert the CAN data stream into a V-Net CAN bus data stream compatible with the Racepak V-Net system. This data is then available for use with the full range of Racepak V-net devices, including on-board displays, real-time telemetry, and data-logging applications. The Racepak V-Net connector modules provide setup capability to accommodate selection of scaling units, data-logging sample rates, and even custom sensor calibration.
( 2 )
$199.95
—
$399.95
Dakota Digital offers extension cables for a variety of their data acquisition systems. The cables are ideal for replacement or for added placement length. Order the model recommended for your data component.
( 2 )
$10.40
AutoMeter CAN Bridge data modules are the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII based engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, temperature, pressure, fuel level (0-90 ohm only), and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice by utilizing the CAN Bridge data module's menu navigation buttons and OLED display. With this advanced CAN Bridge system from AutoMeter, you can now simplify your next instrumentation installation on your ride! Additional features: * Works with most OBD-II applications which is standardized across all OEMs starting in 2008 * Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation * Plug-and-play from OBDII to traditional round AutoMeter short sweep electric gauges, tachometers, electronic speedometers, and InVision LCD dashes * Six total channels available: tachometer, speedometer, fuel level (0-90 ohm only), temp, pressure, and volts * Simplifies instrumentation wiring and installation; no sensors to hookup, which means less wires to connect * Sensor data must be present on the data stream to function, otherwise a discrete sensor must be used
Not Yet Reviewed
$363.99
AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins
Not Yet Reviewed
$189.95
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$15.75
—
$99.95
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$84.95
—
$124.95
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$413.95
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$13.12
—
$239.95
FuelTech's FT input expanders are input expander modules compatible with the FuelTech PowerFT line (FT500/FT500LITE/FT450/FT550 and the FT550LITE/FT600). These FT input expanders offer 20 inputs for sensor readings—such as pressure, flow, temperatures, position, and activation of functions using keys or buttons, and four differential inputs rpm reading and speed. The expander modules fully integrate with FTManager software and communication via the CAN network, with a simple and fast configuration through an interface already known to users familiar with FuelTech products.
Not Yet Reviewed
$599.00
Racepak serial communications cables are used to transmit or download information from the V300/V300SD/V500 data recorders and your computer. There are a number of options available, such as serial to USB port, so you can find the cable that's right for your application. Load up Racepak, keep your data handy, and start your engines.
( 6 )
$39.95
—
$139.95
Racepak driveshaft sensor mount brackets allow you to easily fasten any 5/16 in. driveshaft sensor to a 9 in. center section. These L-shaped supports feature slotted mounting for easy adjustments and snag-free, rounded-off ends. No fabrication is necessary when you use Racepak driveshaft sensor mount brackets.
Not Yet Reviewed
$39.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$189.95
—
$224.95
Keep track of the movement of your shocks with one of these Racepak shock travel modules. Designed for use with Racepak shock travel sensors (sold separately), they do not require any programming and can accept inputs from up to four individual shock sensors. When used in conjunction with Racepak's shock travel kits, critical shock and chassis adjustments can now be made with confidence through the use of shock travel data.
Not Yet Reviewed
$199.95
—
$329.95
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$69.50
—
$299.95
Finish off your V-Net module using one of these Racepak V-Net cable terminator caps. They're available in either male or female configurations to fit your connection type.
( 1 )
$29.95
FuelTech's remote pressure sensor mounting blocks are the perfect solution to mount your pressure sensors in one common place. Each port is individually connected from top-to-bottom, allowing you to run up to four separate pressure sensors on a small lightweight billet mounting block away from vibration and for easier access. (Sensors are sold separately.)
( 1 )
$79.00
HalTech's new multi-function CAN gauge displays real-time data from your HalTech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy-to-use app on your smartphone or tablet uses a wireless connection to the gauge for easy setup and customization. * Set up via gauge-mounted buttons or a mobile app * High-contrast, dimmable OLED display * 1, 2, or 4 gauge layouts on up to 10 different pages * Custom warning points with special warning screens SUPPORTED PARAMETERS: Boost Pressure Air/Fuel Ratio Coolant Temperature Fuel Pressure Ethanol content Air Temperature Battery Voltage Coolant Pressure EGT Fuel Level Fuel Trim Gear Position Injector Duty Nitrous Pressure Oil Pressure RPM Transmission Line Pressure Throttle Position Transmission Oil Temperature Turbo RPM Wheel Speed Wheel Slip * Above can be displayed without additional sensors. COMPATIBLE WITH: Haltech Platinum Sprint Series Haltech Platinum Sport Series Haltech Pro Plugin Series Haltech Elite Series Haltech Nexus Series
Not Yet Reviewed
$430.00
Racepak Molex terminal kits are used to shorten a cable that needs to terminate. Available with 2- or 3-pin Molex connectors, they include both male and female connectors and corresponding pins. These connectors make it easier to assemble electronic products. Racepak stays ahead of the technology curve, developing data acquisition components for professional drivers and auto enthusiasts to achieve maximum performance!
Not Yet Reviewed
$11.95
—
$14.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
