Availability
Adjust the operating parameters of your transmission with an automatic transmission control module or controllers from Summit Racing Equipment. With the right automatic...
Adjust the operating parameters of your transmission with an automatic transmission control module or controllers from Summit Racing Equipment. With the right automatic transmission control module or controller, you can revise shifting patterns for racing or towing, add “automatic manual” or paddle shift capabilities, and even graph performance.
Adjust the operating parameters of your transmission with an automatic transmission control module or controllers from Summit Racing Equipment. With the right automatic transmission control module or controller, you can revise shifting patterns for racing or towing, add “automatic manual” or paddle shift capabilities, and even graph performance.
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$499.95
—
$728.95
FiTech Go Shift transmission controllers are standalone electronic transmission control kits. If you plan on upgrading your transmission and you're having trouble with the wiring, back up lights, or shift points, the new Go Shift system is for you. Now you can have the luxury of a modern transmission for better response, better fuel economy, and overall reliability thanks to this system.
( 10 )
$599.00
These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.
( 1 )
$1,224.67
—
$2,100.48
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$573.95
TCI Wireless EZ-TCU module kits make it even easier to control your transmission and even remotely disable it to prevent theft. These Bluetooth-enabled controllers allow you to control shift points, firmness, and aggressiveness. Data logging and self-diagnostics make it possible to optimize tuning intuitively--without the need for software, a hand-held unit, or cabling. And they also feature anti-theft—the ability to deactivate your car. TCI Wireless EZ-TCU transmission controllers feature: * Easy transmission control from your phone or tablet; no laptop or software needed * Maximum electronic control over the shift points, shift firmness, and shift aggressiveness * Data logging and self-diagnostics for optimal tuning * Anti-theft feature for disabling vehicle through app * Compatible with 4L60E, 4L65E, 4L70E, 4L80E, 4L85E, and TCI 4x and 6x transmissions * Available for iOS and Android
( 2 )
$1,026.95
DIYAutoTune MicroSquirt CAN transmission controllers with sub-harness seamlessly control your transmission. They provide a simple, plug-and-play integration with MS3-Pro, and directly mates with their LSx drop-on harnesses. They are available with a 4L80E or 4L60E sub-harness. Included with your DIYAutoTune MicroSquirt controllers: * 6-pin black connector for power, ground, and CAN bus * 8-pin gray connector for additional inputs * 18 crimp pins for the above connectors Note: * Harness for GM 4L60E transmissions with or without the LUF (lock up feel) control solenoid. You can also wire the harness to communicate with an MS2, another MicroSquirt EMS, MS3-Pro, or MS3 over the CAN bus. * Harness for GM 4L80E transmission includes wiring for the input shaft speed sensor, and can be used as a standalone transmission control solution with minimal wiring involved. But was designed to be a full plug-and-play, zero wiring solution with DIY 24x and 58x harnesses.
( 5 )
$499.99
The GM 6L80 and 6L90 TEHCM houses the transmission control module (TCM), or computer. The eight solenoids are connected to the TCM via a lead frame, all of which are over-molded in the plastic housing and not accessible or serviceable separately. Component fails and circuit faults in the GM 6L80 and 6L90 TEHCM are common, and result in drivability complaints and trouble codes which can only be remedied with a replacement unit. These automatic transmission electro-hydraulic control modules by Sonnax serve as a durable, reliable OE performance solution at a significant savings over OE replacement. Each Sonnax TEHCM GM6L-TEHCM-C6 unit goes through a rigorous cleaning and inspection process where all failed components are replaced. Electro-hydraulic testing in a simulated drive test ensures full functional performance consistent with a new OE TEHCM. A vehicle VIN remains on the Sonnax remanufactured TEHCM and will be overwritten by a transmission shop technician with the new vehicle VIN during the reprogramming process. After installation, the TEHCM must be reprogrammed on the vehicle using a J2534 device in order to function correctly. The fully tested TEHCM is serialized, and the test data stored and packaged in Mylar bag with a protective connector cover to prevent inadvertent static discharge issues during the shipping, handling and receiving processes. Part information details: * Ultrasonically cleaned and thorough flushing of solenoids to remove all dirt and debris—no matter how hidden * New pressure switches installed * New filter plate/screen included * Fully electro-hydraulically tested to comply with OE performance * Must be reprogrammed after installation using a J2534 device for proper function
( 1 )
$218.67
HalTech Nexus Ti4L transmission interface kits allow easy control of GM's popular 4L series of automatic transmissions. Designed as an add-on transmission controller expansion module for the NEXUS ECU and VCU range, the Ti4L will be programmed via the HalTech NSP software, or Rebel LS users will be able to follow the simple setup wizard in the Haltech Connect app. Easy set-up is not the only feature! They have also developed smart long-term learning strategies via closed-loop line pressure control, which means shifting gets better the more you drive. Features include: * Plug-and-play with Nexus Rebel LS terminated harnesses * Easy setup wizard for Rebel LS ECU * Programming and setup via NSP Software or Haltech Connect app * Long-term learning strategies via closed-loop line pressure control * Haltech 500 psi pressure sensor included Compatibilty: * Haltech Nexus Series ECUs and VCUs, including Rebel LS * GM 4L60E * GM 4L65E * GM 4L70E (non-4x4 2006-08 only) * GM 4L80E * GM 4L85E nNon 4x4 1994 and newer only) Note: Does not support Haltech Elite/Platinum/Legacy ECUs
Not Yet Reviewed
$457.99
Our Summit Racing automatic transmission controllers brings you the performance of a modern transmission with improved response, better fuel economy, and increased reliability. They have the ability to control shift points, shift firmness, downshifts, and all other features involved when controlling the transmission. Our transmission controllers include a touch screen hand-held controller for easy setup, and can be used to monitor the transmission in real time. They come with everything you need to connect and control your GM 4L60/65/80/85E or Ford AODE (92-97) transmissions.
Not Yet Reviewed
$569.99
Summit Racing™ offer kickdown switches for a wide range of vehicle, engine, and transmission applications. Kickdown can be used when maximum acceleration is needed, such as passing another car. When the accelerator pedal is depressed all the way to the floor (past the normal full accelerator position), the transmission will automatically engage kickdown—immediately shift down to a lower gear. These replacement switches are built to ensure performance and dependability.
( 3 )
$27.99
Chevrolet Performance SuperMatic transmission control systems make it easy to connect and cruise. These controller kits complement the ready-to-run convenience of your crate engine with plug-and-play operation. There is no additional wiring, and the leads are clearly marked to link up with the engine control harness. SuperMatic control systems are pre-programmed to provide full-function transmission operation after completing the connections. No laptop programming is required. Chevrolet revised the systems with a more compact design for a headache-free installation with your carbureted small block, big block, or ram jet engine—and they're compatible with OBDII code readers. Get in gear with the simplicity and improved shift performance offered by Chevrolet Performance SuperMatic transmission control systems.
Not Yet Reviewed
$2,120.96
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 37 )
$1,025.95
Nothing could be easier than FAST EZ-TCU automatic transmission controllers to electronically govern your overdrive, particularly GM models between 1993-2009. No tuning experience, laptop, or software is required--just a simple installation and setup; these units are configured and ready to roll immediately. Of course, the systems are also fully programmable for those who prefer custom calibrations based on speed, load, and rpm. The EZ-TCUs are capable of multiple setups, which can be switched in real-time … meaning you can run one calibration on your drive to the track, and then change to a more aggressive racing mode with the push of a button! The multi-shift inputs include a full manual mode for bump or paddle shifters. Anyone from a novice to an experienced driver can operate the controllers, as self-diagnostics are built-in. Shift points, shift firmness, shift speed--you now dictate them with the FAST EZ-TCU automatic transmission controller kits, which include the main unit, hand-held module, and wiring harness.
( 5 )
$804.95
—
$891.95
Fleece Performance TapShifters allow you to shift your transmission with the touch of a button. Perfect for towing, drag racing, daily driving, and everything in-between, these kits install in no time and provide factory-like operation, functionality, and styling. Fleece Performance TapShifters are available for a multitude of year/make/model vehicles, and install using OEM high-quality connectors for a complete plug-and-play installation.
( 2 )
$399.00
Summit Bucks
Clearance
ACDelco GM Genuine Parts transmission control modules are GM-recommended replacements for your vehicle's original components. They manage the operation of your vehicle's automatic transmission, and they contain the module and solenoid valves all in one unit. These original equipment transmission control modules have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$115.99
$115.50
TCI TCU 2.0 automatic transmission controllers are fully programmable with the included T-Com 2.0 laptop software. They feature Dual Tune Technology, so you can create and easily switch between two completely different shift modes--daily driving or performance. The ability to make infinite adjustments to shift points and line pressure provides for maximum performance from automatic electronic transmissions and they are paddle/button shifter compatible. TCI designed the controller to be compact with LED diagnostics and data logging functions. TCU 2.0 is also compatible with FAST EZ-EFI 2.0 and XFI fuel injection systems through the CAN/BUS connection and can be configured to read engine sensors and transmit data to other modules and displays. Twelve outputs allow for precise, closed loop current control and programming of non-transmission control functions, such as engine shutdown after a specified idle duration. Features and benefits: * Fully programmable with T-Com 2.0 laptop software * Create and switch between two different shift modes * Make infinite adjustments to shift points and line pressure for maximum performance * LED diagnostics * Data-logging functions * CAN/BUS capability to share data with other systems * Paddle/button shifter compatible * Twelve outputs allow for precise, closed loop current control and programming of non-transmission control functions
Not Yet Reviewed
$1,122.95
—
$1,130.95
The FAST TCU 2.0 is fully programmable with the included T-Com 2.0 laptop software and features Dual Tune Technology, so you can create and easily switch between two completely different shift modes—daily driving or performance. These controllers allow the ability to make infinite adjustments to shift points and line pressure for maximum performance from automatic electronic transmissions, and are paddle/button shifter compatible. Designed to be compact with LED diagnostics and data logging functions, the FAST 2.0 is also compatible with FAST EZ-EFI 2.0 and XFI Fuel Injection Systems, through the CAN/BUS connection, and can be configured to read engine sensors and transmit data to other modules and displays. Twelve outputs allow for precise, closed loop current control and programming of non-transmission control functions, such as engine shutdown after a specified idle duration. For advanced programming and more versatility, choose FAST TCU 2.0 controllers!
Not Yet Reviewed
$1,102.95
Gain control over your transmission with an ATS Diesel Performance Co-Pilot automatic transmission controller kit. Street Co-Pilots are for people who want a transmission they can race on the weekends, but still drive on the street—without having to deal with overly-harsh shifts. With Street controllers, you get exactly that freedom. During everyday driving, the lower settings give you smooth shifts; while at the track, the higher settings give you full throttle shifting that is quick and crisp. All Co-Pilot transmission controllers give you control over your torque converter so you can bring it on faster or later depending on your driving style and preferences. Order the model recommended for your transmission application. Product features: * In-cab controls—you don't even need to pop the hood * Ability to raise line pressure on certain models * More effective than any "shift kit"—pressure increases more than double what shift kits do without harsh or erratic shifting * More efficient power transfer by controlling torque converter lockup; results in lower transmission temperatures * Adjustable on-the-fly * Street variants feature user-selectable race mode that forces lockup after the 1-2 shift while maintaining full line pressure * Automatically controls an exhaust brake on some models
Not Yet Reviewed
$600.00
—
$800.00
BD Diesel Tap Shifters let you take "manual control" of your automatic transmission when you need to switch gears quickly. With the shift lever's up/down touch-button shifting, you can now determine how and when the transmission will grab another gear upon acceleration or downshift. This is especially useful when you're driving down a long grade or freeway off-ramp, to assist with slowing a heavy load. The new Tap Shifter system revolutionizes the way you control your truck. Order the model recommended for your vehicle application. Includes: * Gear shift lever * Underhood control module * Plug-in wiring harness
( 1 )
$472.95
—
$708.95
BD Diesel pressure controllers are designed to prevent midrange torque converter shudder and clutch/band slippage. The controllers feature three different levels that increase mainline pressure by mimicking higher throttle positions. Transmission function is improved and lugging is alleviated with the added feature of a slight hold or delay in shifting. This eliminates all shuttle shifting with light throttle—and reduces shift flare and gear hunting. BD Diesel pressure controllers have higher pressure, more elaborate control, and an easy factory plug-in installation. Order the model designed for your vehicle, engine, and transmission application.
Not Yet Reviewed
$345.95
—
$439.94
Chevrolet Performance automatic transmission wiring harnesses feature GM-recommended design as valid replacements for your vehicle's failing electrical system. Manufactured to provide you with the same performance, durability, and service life you expect from General Motors, they'll help get your drivetrain working properly again. Order the Chevrolet Performance automatic transmission wiring harnesses designed for your application.
Not Yet Reviewed
$310.41
Banks Power Transcommand transmission kits virtually eliminate clutch slippage and will extend the life of your transmission. These Banks transmission kits continually correspond line pressure to power and load levels. The heavy load shifts are solid and decisive, yet the light throttle shifts are smooth and firm.
( 10 )
$309.00
Dorman transmission electro-hydraulic control modules (TEHCM) combine the TCM, valve body solenoids, and pressure and temperature switches into one unit. They restore the ability to shift the vehicle in and out of gear without hesitation or rough shift. They're fully remanufactured and vehicle simulator-tested for durability and quality assurance. Vehicle VIN is required at time of order. Requires programming after installation.
( 11 )
$214.95
—
$714.99
B&M Powerswitch kits only lock out the converter in first through third gears. The TH-700R4 and the TH-2004R will not function properly with the lockup converter locked out in fourth gear. These Powerswitch kits automatically override the switch in fourth gear in overdrive transmissions.
( 5 )
$110.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
