Availability
Showing In Stock Items. Show All 104 Items.
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 81 )
$73.99
Summit oxygen sensors will keep your engine running reliably by properly monitoring the amount of oxygen in your exhaust stream. Our sensors are manufactured to the highest quality standards.
( 1 )
$85.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$63.99
Clearance
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$133.99
$53.99
—
$104.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$55.99
—
$95.99
Clearance
Astemo offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$118.99
$74.50
—
$89.99
Clearance
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 175 )
$79.99
$61.50
Clearance
Is your check engine light on? Is your vehicle hesitating, or even stalling? You may need of a new mass airflow sensor. Bosch mass airflow sensors were developed to replace your OEM components. They're manufactured to strict standards and made of high-quality materials.
( 2 )
$93.99
—
$107.99
$73.50
—
$81.50
Clearance
The variable valve timing solenoid alters the supply of oil pressure to the camshaft depending on the engine's speed and load and can either advance or retard cam position, which provides several benefits, including improved engine operation increased engine power, reduced fuel consumption, and decreased emissions. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts variable valve timing solenoids offer superior coverage for domestic and import applications. Order the model designed to fit your application needs.
( 1 )
$54.99
—
$97.99
Clearance
The crankshaft position sensor is an electronic device that monitors the position and/or rotational speed of the crankshaft, then communicates with the vehicle's ECU to control ignition timing and fuel injection parameters. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts crankshaft position Sensor line has superior coverage for domestic and import applications.
( 1 )
$50.99
—
$104.99
Beck/Arnley ABS speed sensors supply information regarding wheel speed to the ABS computer. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, then the computer modulates the anti-lock feature until the speeds are equal again.
Not Yet Reviewed
$65.99
—
$74.99
Astemo offers engine crankshaft position sensors for a wide range of vehicles, particularly import models. These direct-fit stock replacements are built to OEM specifications for performance and longevity. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the crankshaft position sensor recommended for fitment on your car, truck, or van.
( 1 )
$78.99
Astemo offers replacement ABS wheel speed sensors for a wide range of import vehicles. An anti-lock brake sensor is a type of tachometer that measures the rotational speed of a wheel and passes it to the car's engine control module (ECM). Since all the wheels do not turn at the same speed, ABS sensors report the speeds of all four wheels to the ECM, based on which the ECM determines if the wheels are locking up. Order the model recommended for your application.
Not Yet Reviewed
$51.99
—
$88.99
Has your vehicle ever mysteriously died on you, only to start up fine after emergency road service showed up--and then it happens again? Could be caused by malfunctioning crankshaft position sensors. Beck/Arnley sensors help to control many functions on your car, from ignition timing to power output to fuel efficiency, by relating crucial data to your vehicle's ECU. If your crankshaft position sensors become burnt or worn out, solve the "mystery" with new sensors from Beck/Arnley, for a life made easier by parts made right.
( 3 )
$52.99
—
$81.99
How fast is your cam spinning and why is it important to know? Beck/Arnley camshaft position sensors enable you to accurately measure camshaft speed. This speed determines when your air/fuel mixture should be ignited in your engine cylinders and sends data from your camshaft to your engine management system to keep your vehicle running smoothly and more economically. When you need to replace your camshaft position sensors choose parts made right from Beck/Arnley.
( 1 )
$65.99
—
$70.99
Ride height sensors determine vehicle height. They can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. Arnott aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle's chassis. The ECU is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Arnott ride height sensors are manufactured with quality components, lab tested up to 1 million cycles, and offer plug-and-play installation to restore your vehicle's ability to respond to road conditions, ensuring comfort and capability for a premium ride. Available for numerous applications, select the sensor designed for your vehicle.
Not Yet Reviewed
$92.68
—
$93.61
Rein Automotive OE exhaust gas temperature sensors are made to factory specifications ensuring proper fit, form and function. These temperature sensors are used to report exhaust temperatures to the vehicle's ECU. The vehicle uses this information to control engine and emission parameters. Rein temperature sensors include a vehicle-specific connector that fits directly into the factory plug. Rein Automotive's quality temperature sensors aim to provide both the professional repair technician and vehicle owner the peace of mind and trust that is expected from a Rein OE quality component.
Not Yet Reviewed
$91.99
Keep track of your vehicle's oil level with these replacement Standard Motor engine oil level sensors. They are made to meet or exceed OEM specifications and are available for a variety of applications.
( 1 )
$95.99
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$96.99
—
$97.99
Clearance
Beck/Arnley variable valve timing solenoids are direct-fit OE replacements to facilitate ease of installation and factory-style performance. They're made of high-quality materials to withstand extreme conditions, and they undergo extensive testing to ensure reliability. The solenoids are available for a wide range of vehicle applications.
( 1 )
$86.99
If you're suspecting a faulty MAP sensor, Beck/Arnley has your answer--these direct replacement MAP sensors! Keeping your ECU updated with the manifold absolute pressure is critical to efficient fuel economy. Faulty sensors sending out the wrong signals can lead to poor overall engine performance and disrupt fuel consumption. Beck/Arnley MAP sensors are fast, easy replacements that require no modifications and are the perfect replacement.
( 1 )
$74.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$56.99
On Sale
Standard Motor Products ABS wheel speed sensor wiring harnesses are critical for getting information from your ABS sensor to your vehicle's computer and keeping your antilock braking system properly functioning. These quality replacement harnesses meet or exceed OE specifications, ensuring peak performance and service life.
( 3 )
$95.99
—
$107.99
On Sale
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$70.99
—
$120.99
$63.89
—
$108.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
