Availability
Spicer Drivetrain Products Life Series U-joints consistently outperform the rest, so you can hit the road or trail with confidence. Cold-forged from high-quality steel, these SPL universal joints feature synthetic thrust washers, multi-lip seals, and the choice of greaseable or non-greaseable. Get the most out of your rig with Spicer Life Series U-joints. Order the replacement model designed to fit your vehicle.
( 113 )
$25.99
Summit Bucks
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 501 )
$727.99
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 155 )
$16.99
—
$37.99
Moog Premium U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals, and a grease fitting in the cross body make for easy maintenance. The U-joints are available for nearly two dozen positions, in universal and vehicle-specific applications.
( 212 )
$12.99
—
$28.99
Moog Super Strength U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals and a grease fitting make for easy maintenance. In addition, the Super Strength U-joints have an exclusive microshield coating to protect against rust and corrosion. They are available in greasable and non-greasable styles for more than a dozen positions--in universal and vehicle-specific applications.
( 226 )
$14.99
—
$24.99
Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of our Summit Racing Equipment® U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards, and are available in applications with forged and case-hardened alloy steel crosses for lasting service life. The bearing cups are case-hardened for strength and durability, and superior seals help keep contaminants out and allow for proper lubrication. Plus, a grease fitting in the cross body allows for easy maintenance. Select your part application and install it to avoid complete U-joint failure--problem solved!
( 32 )
$14.99
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 48 )
$20.99
—
$41.99
Manufacturer Rebate
Powertrax Grip Pro traction systems are the latest design in differential technology. They combine the smooth operation of a limited-slip differential, with the strength of a fully machined, forged steel case. Using 3x2 spiral gear engineering, the Powertrax Grip Pro delivers progressive and variable traction. Based on throttle input, you are in control of how much traction is applied. These differential systems are great for use where finesse is just as important as brutal traction. On the road or track, in the rain or snow, Grip Pro is a winner! The systems come fully assembled and there are no friction plates—so you can use any gear oil you like, including full synthetic and racing lube.
( 21 )
$684.99
—
$854.99
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 306 )
$608.95
Replacing the center support bearing should resolve the problem of a clunking sound in the drivetrain. Spicer Drivetrain bearings will hold good and tight, keeping the driveshaft in place. If the rubber in your old bearings is worn-out, it will allow too much deflection in the shaft—causing vibration that will worsen as the movement increases. Spicer craftsmanship means you get longer bearing life and less downtime, as well as complete interchangeability with existing parts.
( 27 )
$99.99
—
$147.99
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$869.99
$782.99
Summit Bucks
Eaton electronic ELocker differentials offer you the best of both worlds. Imagine having the comfort and convenience of an open differential for around town—and the powerful traction of a full-on locker when it's necessary. This is exactly what the Eaton ELockers provide. With the push of a dash-mounted button, you decide when the differential should be fully locked for maximum traction to both wheels, or free to differentiate for the best fuel mileage and tire tread life. Whether you're running a 2WD or 4WD, open or locked, the Eaton ELockers put the driver in total control! Order the carrier designed for your axle model.
( 12 )
$1,554.99
—
$1,715.99
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 52 )
$98.99
—
$158.99
We all respond to pressure in different ways. Dorman differential vents equalize the atmospheric pressure in your vehicle's differentials. Vents deteriorate over time and can often get clogged, requiring replacement. These Dorman vents are constructed from high-quality materials and are manufactured to strict engineering quality standards. Prevent debris from entering and causing fluid contamination, while allowing excess pressures and gases to filter out with Dorman differential vents.
( 8 )
$5.99
—
$9.99
Replace worn or damaged wheel bearing components on your vehicle for improved performance and longer tire life with Beck/Arnley wheel bearings. These replacement bearings are designed and built to OEM specifications to replace the originals perfectly and are offered in various applications to suit your vehicle.
( 11 )
$50.99
—
$84.99
Spicer Select solution is simple: to provide quality-built universal joints that are backed by the Dana name you know and trust. Spicer Select U-joints feature journal crosses that are manufactured from high-quality forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. These universal joints are engineered for exceptional fit and easy installation to maximize up-time. To keep your vehicle performing at its best, choose Spicer Select U-Joints by Dana.
( 1 )
$16.99
—
$50.99
ATP Automotive now offers the widest product offering of automatic transmission control products for the vast majority of import and domestic vehicles. ATP has the best coverage, as well as the highest-quality solenoids, pressure and speed sensors, pressure switches, wire harnesses, and vacuum modulators. ATP automatic transmission shift control solenoids are exact-fit, no-compromise replacement parts. They are manufactured to meet or exceed OEM specifications.
Not Yet Reviewed
$139.99
Exedy OE clutch kits provide the correct fit and function to restore stock power levels. Most replacement clutch kits include pressure plate assembly, clutch disc, release bearing, pilot bearing or bushing, alignment tool, lubricating grease and general installation notes. Robotic testing, special heat-treating, and the use of their own friction materials ensure optimum pedal feel, better drivability, durability, and smooth engagement, so you can enjoy your ride more. Exedy OE clutch kits offer coverage for a wide range of vehicles. Choose the kit designed for your vehicle.
( 12 )
$226.18
—
$320.72
Manufacturer Rebate
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 148 )
$409.99
—
$452.99
Machined from steel, Motive Gear universal joint U-bolt kits have a unique design that provides more bearing surface for the universal joint bearing cap. These bearing retainer bolts are available to fit most of the popular U-joint sizes and yokes. Choose the style that's compatible with your vehicle's axle model.
( 4 )
$13.99
USA Standard Gear ring and pinion sets are high-quality and precision-machined replacements. They're offered for a wide variety of common and hard-to-find applications, differential case designs, and ratios. The right choice adds confidence to your install; select the USA Standard ring and pinion set recommended for your vehicle.
( 50 )
$226.99
—
$548.99
Usually mounted on a vehicle's transfer case, Aisin transfer case shift actuators control shifting from 2WD to 4WD, from 4WD high to 4WD low, and differential lock functions (exact functions vary depending on the particular application). Built to exacting OE specifications, they are available for a variety of makes and models. Aisin transfer case shift actuators include detailed removal and installation instructions for specific applications.
Not Yet Reviewed
$605.99
Timken pinion bearings offer durability and peace of mind. Known the world over, Timken bearings are precision-engineered to provide you with superior quality, along with energy-efficient and cost-effective friction management. For a proper fit that will run smoothly, these single-row tapered roller bearings are your best bet when replacing old and worn pinion bearings. Timken bearings are available for dozens of axle types; choose the models that match your vehicle specs.
( 57 )
$38.99
Motive Gear differential bearing kits contain everything you need to install your ring and pinion. Available for front or rear axles, the kits are offered for nearly three dozen differential case design applications. Includes: * Front and rear pinion bearing * Pinion seal * Carrier bearings * Pilot bearing (depending on application) * Gear marking compound * Crush sleeve * Pinion nut * Brush * Thread locking compound * Cover gasket or RTV
( 25 )
$252.99
—
$287.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
