Availability
Air Lift WirelessAir 2nd generation on-board air compressor EZ mount systems give you everything you need for the fastest, easiest installation possible. EZ Mount systems package the manifold and upgraded, heavy-duty compressor into one convenient, pre-assembled and factory-tested bracket—giving you everything you need to have full control of your air springs in no time at all. Control the air like a boss with your Air Lift WirelessAir 2nd generation EZ mount kit. Features and items: * Inflate and deflate each air spring independently to different pressures * LCD-display wireless controller * One-touch control from inside or outside vehicle is perfect for uneven/top-heavy loads * Two user-defined memory buttons * Compact, dual-path design * Bluetooth-enabled manifold allows for over-the-air software updates * All wiring, hardware, and fittings required for installation
( 8 )
$799.95
Borla realizes that every driver has their own preference for the volume and character of their exhaust sound. So, if you're not happy with your factory exhaust's sound and performance, upgrade to Borla Touring exhaust systems. Made from the finest austenitic stainless steel for durability, these Touring (and rear axle-backs) deliver more of everything! They offer increased exhaust velocity for added power and driving excitement, along with that distinctive Borla Sound of Power that's respected by motoring enthusiasts everywhere. More than a hundred configurations are available—find the model designed for your vehicle.
( 280 )
$799.99
—
$828.99
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 178 )
$780.99
On Sale
Centerforce dual friction clutches generate up to a 90 percent increase in holding capacity over stock systems. These clutch-and-disc sets are designed for engines producing high horsepower and big torque outputs. Perfect for 4WD vehicles, all Centerforce clutch systems provide smooth engagement and light pedal pressure without compromising high performance.
( 305 )
$997.95
—
$1,102.95
$898.16
—
$992.66
Bilstein B8 6112 suspension kits are for those seeking serious off-road action to carry them over the terrain. Each of their B8 kits will optimize the off-road capabilities of your rig with a 60mm digressive piston for increased damping control, specially designed cold wound springs, and an adjustable spring seat, which allows for vehicle leveling, larger tires, and increased ground clearance. They are a direct bolt-on for many applications and utilize the OEM top mount and spring isolators. Are you searching for the ultimate solution to your off-road adventures? One of these Bilstein B8 6112 front suspension kits will be the definitive answer.
( 11 )
$885.00
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 932 )
$784.99
—
$893.99
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 1 )
$799.91
On Sale
All-Pro Off-Road Baja Series front bumpers have race-inspired "Pre-Runner" styling, and are designed to protect the front-end on select Toyota Tacoma models, as well as improve off-road capability. They also allow for the mounting of up to a 9,500 lb. capacity recovery winch with remote solenoid (use of integrated solenoid winch requires grille trimming). The winch mounting surface on the Baja bumper features the common 10 in. x 4.5 in. bolt pattern used by Warn and other winch manufacturers. Tabs are included for mounting a winch fairlead, and there is also a convenient winch hook loop, on which to place the winch hook and tension the line for storage. Key features and options may include: * Heavy-duty steel tubing with CNC laser-cut and brake-formed 3/16 in. plate steel for winch structure and mounting plates * Sides wrap around the fenders, and there's a bottom hoop that serves as protection for the low hanging radiator with an integrated steel skid plate * High-clearance design with improved approach angles * Optional "Baja Taco" headlight hoops and filler plates * Bolt-on installation (except on 1998-2000 models) * Integrated skid plate * Integrated winch and fairlead mounts * Heavy-duty recovery points * Light mounting tabs to mount up to 6 in. lights * Lower radiator protection (may require shorter 4-cylinder radiator to install) * Hardware included * Winch not included (sold separately) * Bumper ships bare steel
( 2 )
$899.99
—
$1,199.99
$764.99
—
$1,019.99
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 423 )
$830.00
—
$952.00
Rough Country's hard low-profile bed covers are built for adventure. These tri-fold tonneau covers deliver a streamlined design that enhances your truck's off-road look while safeguarding your gear. Update your truck bed, secure your gear, and hit the trails with peace of mind. Rough Country's hard low-profile bed covers are perfect solutions for those who demand both style and functionality. Select the one designed for your truck. Features: * Flush, low-profile design with stylish matte black finish frame and aluminum panels * Tri-fold design allows quick access to cargo * Corrosion-resistant black powdercoated aluminum frame * Secure track and rail mounting system with drain tubes included * Nylon straps secure the cover in the 2/3 open position * Drive with the cover in the 2/3 open or closed position * Auto latching design secures on closure * Single cable pull for easy latch release and access * No-drill easy install and removal--all tools included * Nylon safety straps included * 5-year warranty
Not Yet Reviewed
$799.95
Need to install a tonneau fast? Leer HF350M Series tonneau covers provide easy on and off, no-drill--or any other tool--installation. The low-profile, textured, matte black panels feature dent resistance, keeping your valuable load safe. They also include the exclusive CYNC latching system (patent-pending) for one-hand operation from either side of the vehicle—avoiding flimsy pull cables. Leer HF350M Series tonneau covers may sound too good to be true, but we have the models designed to fit your truck bed right here at The World's Speed Shop®!
Not Yet Reviewed
$1,127.00
Time for a suspension upgrade? You can increase wheel travel by upgrading your OE upper control arms to BDS performance. BDS Suspension front upper control arms are specially designed for leveled and lifted applications, and they come fully assembled, ready to install right out of the box. Built from high-strength 1.5 in. O.D. x .120 in. thick wall steel tubing, the UCAs feature an indexed ball joint cup to correct the ball joint positioning. They can be used with BDS lift kits and other lift and leveling kits on the market. The frame mounting ends feature durometer-specific rubber bushings and premium quality, greaseable ball joints for smooth, quiet operation, and superior durability compared to arms featuring uniballs, poly bushings, or heims. Choose the upper control arms designed for your vehicle.
( 1 )
$770.95
On Sale
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
$764.99
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 41 )
$816.99
—
$930.99
On Sale
Erase the dead zone for greater power and less turbulence with Twisted Steel Y-pipes from aFe. The fantastic fit and finish on the mitered mandrel-bent stainless steel pipes allow for a transition from 3 in. to 3.5 in. collector, while high-caliber flanges and band clamps aid in an easy installation process to your stock exhaust. The 400 CPSI catalytic converters increase flow and help prevent "check engine" issues created during combustion.
Not Yet Reviewed
$877.80
$790.02
On Sale
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 47 )
$1,091.95
$982.76
Perfect for long hauls or remote refuels, Dee Zee liquid transfer tanks can raise your hauling capacity significantly. They are available in models with various volumes and features to fit almost any truck bed application. While most of these auxiliary tanks are not rated for gasoline or flammable fluid transport, many can be used for diesel or other non-flammable fluids. Find the right size, capacity, tank material, and finish for your application—and get your truck outfitted with a Dee Zee liquid transfer tank today.
( 1 )
$751.99
—
$1,044.99
On Sale
BAK BakFlip MX4 covers literally do it all. From their sleek contemporary styling to their state-of-the-art functionality, BAK BakFlip MX4 tonneau covers have been enhanced with a premium-density foam core, upgraded latch housing components, and an all-new integrated tailgate seal that allows your tailgate to be shut with the cover open or closed. Their aircraft-grade aluminum construction, along with a black powdercoat finish, makes them not only one of them most durable tonneau covers on the market, but also one of the most appealing. Are you traveling with lumber, tools or a heavy payload? Keep your valuable cargo dry—and safe—beneath a BAK MX4 tonneau cover!
( 93 )
$1,149.99
—
$1,199.99
$999.99
—
$1,049.99
Icon Vehicle Dynamics Delta Joint tubular upper control arms are designed, engineered, and built to take your vehicle's performance to a new level. They offer maximum strength, corrosion resistance, optimal alignment specs, and confidence-inspiring handling, plus the potential for increased wheel travel when paired with Icon extended travel coilovers. These UAC DJ kits feature their patent pending Delta Joint--a heavy-duty high-angle ball joint that is more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint. Superior performance and ride quality is yours with Icon tubular upper control arms. Features: * ICON Delta Joint has a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint, providing increased longevity and noise-free operation * 1026 DOM steel construction * CNC-bent tubing * Serviceable dual-stage bushings * CNC-machined bushing housings and sleeves * Built-in caster correction * Black semi-gloss powdercoat finish
Not Yet Reviewed
$849.95
Bilstein B8 8100 Series bypass shocks are direct-fit, position-sensitive dampers for light trucks and SUVs. These motorsports-inspired shock absorbers utilize a dual tube externally adjustable bypass design. They feature "incremental flow" bypass adjusters, allowing for finite and incremental changes for rebound and compression. Bilstein B8 8100 bypass shocks will maximize your driver experience, offering unparalleled ride comfort and incredible bottom-out control. Many sizes and options are available; order the shocks recommended for your vehicle. Additional details: * Shocks utilize a bottom hose, remote reservoir exit port, delivering increased compression control during the full cycle * Remote reservoir is supplied with a bolt-on aluminum anodized chassis mount for easy fitment * Zinc plated finish * Non-coilover 60mm body diameter
Not Yet Reviewed
$784.00
On Sale
Eibach offers Pro-Truck Stage 2 coilovers for a variety of applications. Stage 2 systems for Chevy vehicles feature Pro-Truck coilover 2.0s and Pro-Truck Reservoir Sport shocks. The height-adjustable front coilovers and external reservoir rear shocks deliver increased off-road performance. Stage 2 systems for Toyota vehicles feature Pro-Truck coilover 2.0s and rear Sport Shocks and Pro-Lift-kit springs. The front adjustable threaded spring perch accommodates increased loads and maximum clearance. ERO Off-Road Race Spring equipped and compatible. Additional details: * Anodized 6061-T6 billet aluminum coilover mounts 46mm piston monotube design with nitrogen-filled variable force valving * Individually dyno tested for matched performance and reliability. Heavy-duty bushing system also cycle-tested * Engineered, manufactured and tested domestically by Eibach
( 1 )
$1,183.00
$946.40
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 545 )
$1,149.95
$1,033.95
On Sale
Trail-Gear dual transfer case adapters enable you to install a Mini Truck Crawl Box. These reliable kits greatly increase the oil flow in and around the adapter for cooler operation, and Trail-Gear has also increased the strength of the casting by making the walls thicker. All necessary installation hardware, including nuts with factory thread lock adhesive, and instructions are included. Choose the kit made for your vehicle.
Not Yet Reviewed
$1,099.99
$934.99
Camburg Engineering tubular uniball upper control arms offer unmatched strength and resistance to the rigorous demands of off-road driving. Along with robust construction, they significantly enhance suspension geometry and wheel travel, resulting in improved control and responsiveness. Camburg upper arms are designed to address the limitations of stock upper arms when lifting your truck. By replacing the stock ball-joint with a larger uniball bearing, these kits improve wheel travel and durability under extreme conditions. They can also augment the vehicle's alignment, driving characteristics, and handling. The arms are designed using CAD/CAM engineering software and manufactured in-house with precision welding and CNC machining. They are powdercoated steel gray for added durability, and include the necessary hardware for installation. Select the Camburg tubular uniball upper control arms designed for your truck and eliminate restrictive factory ball joints.
Not Yet Reviewed
$929.00
—
$1,099.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
