Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
TOYOTA SUPRA Parts and Accessories
Showing In Stock Items. Show All 212 Items.
Optima RedTop Starting 12-Volt Batteries
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1530 )
$279.99
—
$309.99
Optima YellowTop Deep-Cycle 12-Volt Batteries
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 418 )
$299.99
—
$379.99
Fluidampr Harmonic Dampers
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 144 )
$485.42
Maradyne Jetstreme Electric Fans
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$307.12
—
$412.89
XS Power AGM Batteries
XS Power AGM batteries are some of the lightest racing batteries on the market. Independent test results have proven that they outperform other battery models that outweigh these power providers by up to 20 lbs. Cutting-edge lead acid battery technology produces more energy in a smaller space because each cell is compressed before case insertion, resulting in efficient power-producing packages that are completely sealed with no need to ever add water. This design is ideal for the abuse of racing, making these the batteries of choice for demanding racers and Monster Truck drivers who need top performance and reliability. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power AGM batteries best suited for your application. Product features include: * Designed to be an inch shorter than what the competition offers for fitting in places where space is at a premium * Deep-cycling ability and ultra-low internal resistance results in high cranking amps and excellent vibration resistance * Variable position mounting (except upside-down) thanks to the no-spill design * Offered in 6 V, 12 V, 14 V, and 16 V models
( 282 )
$439.99
System 1 Spin-On Oil Filters
System 1 has eliminated the need for disposable oil filters. Built from durable anodized aluminum housing, System 1 filters feature a washable, stainless steel element that can be used over and over again. They can be completely disassembled for inspection, revealing metal shavings and residue that could indicate engine wear or damage. System 1 oil filters are perfect for daily drivers, fleet vehicles, and race and marine applications.
( 16 )
$257.00
—
$304.00
Maradyne Mach Two Series Electric Fans
Maradyne Mach Two series truck electric fans feature dual 225 W high performance IP68 sealed motors attached to dual 11 in. diameter 5-blade fans to put out over 2,500 cfm of airflow. They have all glass-filled nylon construction and include dual harnesses for an easier installation. The fans are available with different mounting bracket positions, so you can match up with your radiator mounting style.
( 16 )
$311.84
Go Fast Bits G-Force III Electronic Boost Controllers
The G-Force III is the latest iteration of Go Fast Bits' feature-packed electronic boost controller—now with the ability to monitor and display your engine's air/fuel ratio in either Lambda or AFR. By connecting the analog output of most wideband oxygen controllers (i.e. Innovate LC-2, AEM UEGO etc.; sold separately) to the G-Force III's auxiliary input, you can toggle between boost pressure and air/fuel ratio display. This saves you from having to install a separate AFR gauge in your car, and it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard, as your concentration is likely to be on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to six boost presets and select on the fly; use the scramble feature for overtaking, launching, towing, or protecting the engine—and you can even customize the lighting color to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! Additional G-Force III electronic boost controller details: * For boost pressures up to 50 psi (3.45 bar, 345 KPA) * Adjust peak boost, rise rate, and closed loop correction. * Display boost pressure in PSI, BAR, or KPA * 6 Boost presets, individually programmable * Unique "scramble" feature with remote switching * Peak boost recall * Air/fuel ratio display in AFR or Lambda (when connected to a wideband oxygen controller) * Separately adjustable overboost and lean mixture warning/boost cut * Touch buttons with user selectable illumination colors * Auxiliary input to switch boost presets or activate scramble * 1/2 DIN size casing, fits standard stereo slot * Supplied with MAC 3-port solenoid
( 1 )
$412.65
Procar Series 1614 Seats
Procar Series 1614 seats are perfect to reinforce a traditional, classic look for your interior. They feature stylish vertical stitching, sleek lines, and side bolsters for maximum support and comfort. The adjustable bucket seats incline and recline via lever control. Each seat is built with TIG-welded steel tubing, injection-molded foam, and suspension straps for support and comfort; and sliders are included. Procar Series 1614 seats are available for the driver or passenger side, in a choice of material and colors.
( 3 )
$297.99
MechMan S Series Alternators
MechMan S Series 6-phase alternators offer incredible output in a compact and durable package. The 240 amp models offer the best balance between peak output, and output at engine idle RPM; while the 320 amp models are all about max power and not designed to charge at low idle speeds. Both S Series alternators feature 12 diodes, twin rectifier plates, and outstanding airflow ensure long service life, even in severe conditions. These units come equipped with a smaller 1.75 in. diameter alternator pulley, and will require a slightly shorter drive belt to be installed for proper belt tension. Order the model recommended for your auto application.
( 31 )
$349.00
—
$429.00
ATI Super Damper Standard Harmonic Balancers
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 235 )
$384.00
—
$391.76
Morimoto Sealed5 Bi-LED Headlight Conversions
JUST WHEN YOU THINK: You've done your research and come across every last option in the 5x7 in. sealed beam LED market, these should catch your attention. While it's true there's only so many ways you can package a set of low and high beam LED-based optics into a small rectangular headlight, Morimoto's Sealed5 Bi-LED headlight conversions pull it off in the most functional and attractive setup possible. OUTPUT: In low beam mode, Nichia NCSW170C Series LEDs, paired with Morimoto's advanced Kuria Optic projector lens array, efficiently distributes 2400 lumens on the road in a properly LHD-stepped beam pattern. In high beam mode, the Sealed5 illuminates an extra set of optics, upping the overall output to 4300 mosquito-melting lumens there. DRL / SWITCHBACK: The quad-optic setup has three functions: 1) High-intensity white daytime running light. 2) Low-intensity white parking light, and 3) High-intensity amber turn signal. The switchback setup on the turn signal will automatically interrupt the white DRL, flash, and then return to white once the signal stops. The 3-wire DRL/Signal input makes setup easy. If you don't care for the DRL or turn signals, they do not have to be wired in. QUALITY: No expense was spared when designing the Sealed5. The heart of the headlight is powered with high-quality LEDs from Nichia-Japan and Philips-Lumileds. These aren't cheap emitters to begin with. Your classic car has already withstood the test of time and the UV-coated polycarbonate lens will take another couple decades worth of abuse without fading. You can feel the precision in the heavy-duty diecast housings that double as a heat-sink. A special PWM LED driver resides inside of the headlight to keep the LEDs running at their peak intensity, even during prolonged periods of use. 5X7 in. STANDARD: Designed to replace all 5x7 in. rectangular headlights, these are cross-compatible with other sizes commonly known as H5054, H6054, or HP6054. The Sealed5 offers full low and high beam functionality. They come standard with H4 3-pin male inputs and should be plug-and-play on most classic cars and trucks.
Not Yet Reviewed
$314.00
JMS Chip PowerMAX FuelMAX Fuel Pump Voltage Boosters
You don't need a new fuel pump; you need JMS Chip PowerMAX FuelMAX—the "Boost-A" devices that truly deliver! They provide clean continuous voltage and the highest amperage available to provide maximum power and fuel for your vehicle--up to an 80 percent increase in fuel delivery is possible. PowerMAX FuelMAX voltage boosters feature proprietary enclosures, industrial heat sink, 10-gauge heavy-duty wiring, and either 40 or 80 amp fuses, along with a host of new and innovative features to further improve your experience. Choose from single or dual inputs/outputs, plug-and-play versions, and 3-ways to trigger boosted output. JMS voltage boosters are pre-engineered for use on most Dodge, Ford, GM, and import vehicles—as well as most any others utilizing an electronic fuel pump.
( 8 )
$399.73
XClutch Chromoly Flywheels
XClutch chromoly flywheels are explosion-proof and designed to meet SFI specification 1.1. They come with an integral ring gear and timing sensor ring, if applicable. These flywheels have been engineered to the highest standards—and are available in a range of configurations for various performance street and race applications. They feature premium quality materials for the ultimate in strength and weight reduction. XClutch flywheels are the choice for many top motorsport teams and tuners from around the world. Order the model recommended for fitment on your car or truck.
( 1 )
$483.48
Enkei RPF1 Silver Wheels
Enkei RPF1 silver wheels feature an attractive split 6-spoke layout. The one-piece lightweight aluminum rims improve handling, responsiveness, and ride quality. Their twin spokes achieve better stress dispersion on curves, hard braking, and extreme race driving. The pocket design around the bolt circles increases rigidity, keeping the wheel cooler in racing environments. Enkei RPF1 wheels are available in a variety of widths, diameters, and other fitment options.
( 7 )
$313.20
—
$335.70
SCE Vulcan Cut-Ring Head Gaskets
SCE Vulcan cut-ring head gaskets are hybrids forged to harness the best sealing properties of two head gasket types—composite and stainless steel. With no sealant needed, the pliable, perforated metal-core composite bodies eliminate coolant and oil leaks, while the solid stainless steel cut-rings "bite" into the cylinder head forming a positive barrier against combustion pressure leaks—without machining. SCE Vulcan cut-ring head gaskets are designed for use with high-static compression or forced-induction engines, which are prone to combustion pressure leaks when using typical composite or MLS head gaskets.
( 17 )
$285.79
Konig Ampliform Gloss Bronze Wheels
Konig Ampliform gloss bronze wheels are available in a variety of sizes, pitch center diameters, center bores, and offsets. These one-piece aluminum rims feature flow form technology construction, ensuring a stronger, lighter wheel, with increased elongation and shock resistance, than a traditional cast design.
Not Yet Reviewed
$289.95
—
$299.30
U.S. Wheel 52 Series Chrome Smoothie Wheels
U.S. Wheel's 52 Series wheels are the original Smoothies. The wheels have a durable mirror-chrome finish on stout steel construction. They're available in a variety of sizes and bolt patterns, in both standard and reverse offset models, to fit a large range of vehicles in nearly any combination. Reverse offset wheels have less backspacing and more dish, which may interfere with some brake and wheel opening configurations.
( 4 )
$278.99
Lock Off-Road Baja Matte Bronze Wheels
Lock Off-Road wheels are engineered for performance, tested for durability, and designed for adventure, making them the perfect companions for your next journey off the beaten path. Legendary in the art of off-roading, Lock's precision-cast high-grade aluminum alloys offer superior tensile strength and reduced weight, while their streamlined designs and popular colorways provide a custom-tailored look for your vehicle. Lock Off-Road Baja matte bronze wheels interconnect an off-road wheel with a proven lightweight classic motorsports design and a special TACT-coated finish. The Tough-Application-Chemically-Treated coating was formulated with a scientific approach to take on the elements—and win, so your wheels retain their stunning appearance. Bringing together strength and style with weight reduction, Baja wheels increase the spirit of extreme motorsports on your rig. For the ultimate durability and visual appeal select the Baja wheels with the ideal fitment specs for your vehicle.
Not Yet Reviewed
$288.00
Centerforce II Clutch Kits
Centerforce II clutch kits provide up to a 60 percent increase in holding capacity over stock systems. Their clutch-and-disc sets are recommended for mildly modified vehicles used for street and strip type applications. These units are also very capable for 4WD and off-road use, heavy-duty towing, and commercial applications.
( 48 )
$377.95
Motegi Racing MR131 Traklite Satin Black Wheels
Fueled by motorsport innovation and inspired by the tuning culture, Motegi Racing MR131 Traklite satin black wheels blend the best of both worlds. The MR131 Traklite wheels have a one-piece cast aluminum construction with a 5-spoke design and a satin black finish with TRAKLITE etched in one of the spokes. Motegi utilizes their Flow Form Technology—a unique casting process that combines the strength and weight savings of a forged wheel, but with the cost savings of a cast aluminum wheel. Each MR131 Traklite wheel comes with a snap-in center cap featuring the Motegi brand logo.
Not Yet Reviewed
$258.00
Sikky Manufacturing Adjustable Subframe Bushings
Looking to help minimize wheel hop in your vehicle and stiffen up your suspension? Sikky Manufacturing solid subframe bushings allow for perfect fitment and improved handling. They help with anti-squat to drastically improve the handling over OEM rubber bushings. Available in different styles, all Sikky subframe bushings replace OEM bushings, are CAD/CAM designed from CNC T6061 aircraft quality aluminum, and will drastically improve suspension performance, helping to eliminate wheel hop. Eliminate the "sloppy" feel; replace squishy rubber bushings with Sikky subframe bushings. Select a set designed for your vehicle.
Not Yet Reviewed
$319.19
Napier Sportz SUV Tents with Screen Room
Napier Sportz SUV tents with screen room quickly transform your SUV into a comfortable home-away-from-home, by simply attaching the universal vehicle sleeve. Camping in your backyard? No problem! They easily convert into ground tents by unzipping the vehicle sleeve. No matter where you set up, you can sleep blissfully and enjoy the night sky! Order the model designed to fit your vehicle application. Features include: * Sportz tent with screen room has spacious 10 ft. x 10 ft. ground tent with over 7 ft. of headroom; sleeps 6 adults * 3 mesh windows, 2 large doors, and 2 overhead skylights offer optimal ventilation * Vehicle sleeve designed to accommodate all CUVs, SUVs and Minivans * Quick and easy access to your vehicle * Connects to the cargo area of your vehicle, creating additional sleeping or storage space * Easily transforms into traditional ground tent * Large 6 ft. x 7 ft. screen room allows you to dine in style with an unobstructed, bug-free view * Full rainfly and built-in storm flaps in windows and for weather protection and privacy * Keep organized with gear loft, gear pockets, and lantern holder * Expandable carrying bag for storage * Made from high-quality polyester taffeta and polyethylene to ensure long years of use
Not Yet Reviewed
$449.99
CSF Racing Radiators
CSF racing radiators feature the most advanced and efficient radiator cores in the industry. Offered for both vehicle-specific and universal applications, they use innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation. Specially engineered tubes in the shape of a "B" are carefully formed and then brazed over the seam. CSF is able to use thinner and lighter aluminum because this design is stronger than normal welded "O" shape tubes. With the inlet in the middle of a seam-brazed tube, the surface area of the tubes is increased approximately 15 percent over regular tubes. With CSF's B-tubes you get dual liquid laminar flow and the efficiency of two smaller tubes vs. one large tube in the same space. High-efficiency, multi-louvered fins are precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in CSF's wind-tunnel lab. CSF offers two all-aluminum end-tank designs to match any style and performance needs. CSF 7000 Series racing radiators have OE-style radial tanks that are flat, rounded, and welded together. Perfect for the customer who likes the sleek and smooth look, and wants to display the intricate welding. CSF deep-drawn end tanks are stamped to the same geometry of OE plastic end tanks. The only high performance manufacture to feature this advanced radiator technology; CSF deep-drawn end tanks feature less welding, and are generally considered the strongest tanks in the industry. Additional features of CSF racing radiators include: * Finished with CSF's Show-Stopper mirror polish process * CAD/CAM designed * Racing-style aluminum drain plug * Brazed in a controlled atmosphere brazing (CAB) furnace—the preferred process for aluminum * ISO 9001/9002 certification * Military-grade (special clad) aluminum used for tubes, fins, and headers * Plates and side brackets meet JIS 3003 specifications * Privately owned factories with full in-house tool rooms * CNC-machined fittings * TIG welded
( 37 )
$399.00
