Availability
Showing In Stock Items. Show All 12 Items.
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$106.99
—
$108.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$131.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$110.99
King XPG-Series coated main bearings feature a unique lug design that eliminates the conventional lug recess—so no oil escapes and full oil pressure is maintained. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, these bearings have a 20 percent higher load capacity and will better resist surface fatigue. They also feature King's factory-applied pMaxKote nano-composite coating that takes protection to the next level without adding any additional thickness! XPG-Series sets are available for a variety of vehicle and engine applications.
Not Yet Reviewed
$153.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$109.99
—
$158.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 80 )
$106.99
—
$117.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$123.99
—
$135.99
Summit Racing™ offers Race Series main bearing sets for a wide range of applications—including many Chevrolet, Ford, Chrysler, Dodge, Jeep, Ram small block, big block, and Hemi engines from the early 1960s and up. Main bearings hold the crankshaft in place and allow it to rotate within the engine block. These performance replacements are machined from tri-metal copper-lead alloy, and are available in numerous upper/lower groove styles and engine crankshaft undersize options. Order the set recommended for your vehicle.
( 3 )
$110.99
—
$150.99
Summit Racing™ offers Race Series rod bearing sets for a wide range of applications—including many Chevrolet, Buick, Ford, Ram, Jeep, Dodge, Chrysler, and Plymouth small block, big block, and Hemi engines from 1955 and up. The bearings provide a low-friction pivot point between the connecting rod and the crankshaft, and the connecting rod and piston. They keep the crankshaft and connecting rod in place as they rotate. These performance replacements are machined from tri-metal copper-lead alloy and are available in numerous engine crankshaft undersize options. Order the set recommended for your vehicle.
( 3 )
$125.99
King XPG-Series main bearings feature a unique lug design that eliminates the conventional lug recess, so no oil escapes and full oil pressure is maintained. In addition, narrowed bearing lengths help eliminate dangerous fillet ride on high-radius cranks. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, King XPG-Series main bearings have a 20 percent higher load capacity and better resist surface fatigue. For superior engine components, choose King.
( 2 )
$166.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$138.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
